I have Acrobat 8 standard, I can not create PDF file any more. It stopps after 10%. This is happen after I have trayed Acrobat IX prof. demo. I have unstalled and reinnstalled Acrobat 8, the same problem are there. Can sombody help me.

Problem to make PDF file, stopps after 10%?

Hey Tom,
Could you please tell me how have you been trying to create PDFs.
What exact error pops up on your screen when it stops after 10%?
Please specify more on what you mean by saying 'trayed Acrobat IX prof.demo' as I need to analyze what exactly is the trouble.
Hope to get your response.
Regards,
Anubha

Similar Messages

  • Why can I not open PDF files any more?

    Why can I not open up most of the PDF files that I receive via email. This has not been an issue before. Do I have to renew something or reload?
    8.1 windows.

    Hi Alan,
    Please download PDF reader if not already.
    https://acrobat.adobe.com/in/en/products/pdf-reader.html
    Hope this helps.
    Thanks and Regards,
    Sumit Singh

  • My earphones are not fitting properly in my ipod nano 6th gen. it is not flushed and i have tries with many earphones but the same problem is there. What is the problem?

    It is in warranty does it need some repair?

    Get a magnifying glass and a flashlight and make sure there is not something in the jack interfering with entry. If there is not, push harder.

  • My macbook pro is frozen, the mouse moves, but it will not click.  I have restarted and it is still the same... Can anyone help me ?

    my macbook pro is frozen, the mouse moves, but it will not click.  I have restarted and it is still the same... Can anyone help me ?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • HT5622 I have reset my iPhone, but later I could not activate it, it's not accepting my ID / Password. I restored it but still having the same problem. I need your help. Thank you.

    I have reset my iPhone, but later I could not activate it, it's not accepting my ID / Password. I restored it but still having the same problem. I need your help. Thank you.

    Try making a new Apple ID? I don't really understand what you mean.. Make a new apple ID, log in with that one and then when you are on your phone log out of it and THEN log in our old ID? If you still can't log in the old one then it's most probably a bug or something.. Anyway.. Good luck with your problem!!

  • If i have one iPad and I want all the apps that are there how do I copy that so i can have them on another iPad the same way as i have them on the first iPad?

    if i have one iPad and I want all the apps that are there how do I copy that so i can have them on another iPad the same way as i have them on the first iPad?

    If you want both iPad to be identical .....
    Without connecting your iPad to your laptop, start iTunes. Go to iTunes>Preferences>Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    Now connect your iPad to your Mac and start iTunes.
    When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases.
    After it finishes transferring all your apps to the Mac, right click on your iPad and select Backup your iPad.
    Sync the iPad and eject it when it is complete.
    Quit iTunes
    Connect the second iPad.
    Launch iTunes
    Right click on the iPad name on the left side and select - Restore from Backup
    Select the backup of the first iPad and let it restore from that backup.
    When it finishes restoring - sync with iTunes to transfer all of the apps and any other content that you want onto that iPad
    Eject the iPad when you are done.
    Check the second iPad and if all of the content did not sync as you wanted - or you want to remove some of the content - connect it again and then choose the content that you want - uncheck what you do not want - and click on Apply in the lower right corner of iTunes.

  • After repairing permissions, in Mac OS X, I ask the utility to verify permissions again and the same problems are shown, as if I had not repaired anything. What's happening?

    After repairing permissions, in Mac OS X, I ask the utility to verify permissions again and the same problems are shown, as if I had not repaired anything. What's happening?

    What you are seeing are messages. It's ok.. it won't do any good to repeatedly repair permissions. As long as you see Repair Permissions Complete when it's finished, you are good to go.
    Also, if you see any messages that say: SUID: That can be ignored.
    Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
    Keep in mind, the only time you need to repair permissions is for troubleshooting.

  • My "other" in my itunes in over 12GB, I have restored my phone but encountered the same problem.   What should i do?

    My "other" in my itunes in over 12GB, I have restored my phone but encountered the same problem.   What should i do?

    Have you got any apps that have large amounts of data, e.g. 3rd party video players?
    tt2

  • Guys, my browser is going crazy and every website that I am on changes in about 10 seconds to 2 minutes to another webpage. I even downloaded a newer 5.0 version of firefox and I am having the same problem.

    Guys, my browser is going crazy and every website that I am on changes in about 10 seconds to 2 minutes to another webpage. I even downloaded a newer 5.0 version of firefox and I am having the same problem.

    Your System Details are showing Fun Web Products. Suggest you look in Add-ons - Extensions and Plug-ins, and Control Panel>Add/Remove programs or >(newer version) Programs and Features. You could also do a search of your computer.
    Fun Web Products(associated with MyWebSearch) always seems to cause problems, Alexa does, too, but less often - there may be conflicts.
    I'm not an expert on these two products. I'm afraid I can only alert you to the problems. Google will show you plenty of evidence of problems. You might also try the Search Firefox Help box above - a gold mine but it usually requires a lot of digging.
    You can start Firefox in Safe Mode - Hold Shift Key down as you double click on the Firefox icon>ignore the page that opens>Continue. If that improves things you could do a little troubleshooting(Safe Mode, Problematic extensions etc), use default theme, -
    https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    http://support.mozilla.com/en-US/kb/Troubleshooting%20plugins

  • Is it possible to have source and target schema in the same DB instance ?

    Hi All,
    I'm using Oracle 11gR1.
    I have switched source locations from other server to the one with OWB.
    During deploy I get VLD-3064 and I can't deploy mapping because of many 'table or view does not exist' warnings.
    Is it possible to have source and target schemas in the same instance ??
    How to do it ?
    Regards,
    Martin

    Hi Jörg,
    Thanks for your help and quick answer.
    I'd like to clarify a little your answer :
    1. Are the any special privilages I need to set ? Currently I have only 'RESOURCE' and 'CONNECT' (I think I didn't have to add any other privs when that schema was located on other instance...)
    2. Also VLD-3064 states that : 'Owning and referenced location of this connector are on the same database instance. Unless explicitly referenced in configuration settings no generated code will use the dataabase link resulting from deployment of this connector'. Does it mean I have to put something in configuration ?
    Thanks,
    Martin

  • Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. When I open the contact, I can only see 3 contact names and the rest of 4000  contacts are not listed

    Question: When I want to send SMS and click on the contact, the contact came out with names and numbers, as if the whole contacts are there in the phone. However, when I open the contact, I can only see 3 contact names and the rest of 4000 plus contacts are not listed, and it makes you difficult to call through contact

    The iPhone remembers information about previous contacts.
    Complelely independently, you have a Contacts app with a contacts list.  It sounds like your contacts list has 3 names on it.  You need to add a few names.

  • My firefox is the most updated version but on certain sites like youtube and live mail, it keeps detecting an older brower. i have reinstalled firefox multiple times but still face the same problem. is there anyway to solve this?

    it's currently on version 3.6.13 but I have been facing this problem for months. I tried completely removing firefox from my applications (on my macbook) and reinstalling but the same problem persists, with websites detecting firefox version 2.0 instead of 3.6.

    You need to reset your user agent string, for details see [[Websites or add-ons incorrectly report incompatible browser]].

  • To see if you can have XP and Windows 7 on the same computer?

    I am new to Forums so I don't know if I am in the right place to ask this question. Can you have the older XP and have Windows 7 programmed on to the same computer? This concerns using an older printer that requires XP.

    Hello Joseph Hill.
    This question should be asked in the
    Windows Answers Forum.
    Anyway, two Windows versions can coexist if you choose one of the following options
    create a dual boot configuration: create 2 partitions on the hard disk, install Windows XP in the first one and Windows 7 in the second one; the Windows 7 boot loader will detect the Windows XP installation and configure the boot loader to display a menu
    that will allow you to choose the Windows version you want to start. You can then install and configure your printer in Windows XP, but it won't be available for you to use it in Windows 7;
    install only Windows 7 and create a virtual machine: you'll install Windows XP in the virtual machine and then install and configure your printer in Windows XP.
    Bye.
    Luigi Bruno
    MCP, MCTS, MOS, MTA

  • How do i have landscape and portrait slides in the same keynote file?

    how do i create landscape and portrait slides in the same keynote file?

    You cant, its one or the other not both, the slide size setting is for the whole presentation, not for individual slides.
    The slide format is chosen to match the display the presentation is shown on. I have presentations showing on vertical, horizontal, square, circular and iregular shaped screens with rear projection, but a single format must still be set.

  • Can not create PDF files 8

    Removed PhotoShop 5 and a few other programs the other day to create more room. Now I can't create PDF files anymore in Excel and AutoCad. When I try, it outputs to my note pad with the following:
    %%[ Error: undefined; OffendingCommand: setdistillerparams; ErrorInfo: CalCMYKProfile U.S. Web Coated (SWOP) v2 ]%%
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    Error accessing color profile: U.S. Web Coated (SWOP) v2
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    Any sugestions.
    I'm useing Acrobat 8 Standard with Windows XP
    Thanks
    Steve

    If the repair does not do the job, then try a different job settings in the printing process. The error you are getting comes from the Distiller step of the PDF creation. You can go in steps if you wish by trying to print to file. Then opening that file in Distiller to see that happens.

Maybe you are looking for

  • MBSA Windows Update Agent installation

    I'm implementing MBSA on our domain.  I've worked through the various firewall issues, etc.  Next I received a Security Update Scan Result that "Computer has an older version of the client and security database demands a newer version. Current versio

  • Smart Form - Paragraph Protection

    Hi, I have a requirement in the SmartForm where the required output is to printed as follows. itab1-line1 itab1-line1 itab2-line1 itab2-line2 itab2-line3 itab1-line2 itab1-line2 itab2-line4 itab2-line5 itab2-line6 itab1-line3 itab1-line3 itab2-line7

  • Consequences of maintaining Plant Parameters

    Dear All, I would like to know that what could be the consequences for maintaing plant parameters under ' Inventory Mangement and Physical Iinventory ' for the plant which is copid from the existing plant for which plant parameters have not been main

  • Unusably slow initialization, keyword filtering

    I primarily use iphoto as my video source, as I shoot a lot of video with my panasonic point and shoot camera (it does hd video, and very good vga). imovie 11, literally takes 5 minutes to start. I have a macbook pro, 2.8ghz, previous model, with the

  • New "unable to open communicaion device" message when using powerbook modem

    I've never had a problem with dial-up until recently. I occasionally use Airport on a public wifi, nothing configured on my G4 12" Powerbook. Recently, when awaking from sleep and sometimes when the machine has been running, I started getting the sub