I have adobe xi pro, but i can´t edit a form create with adobe 8.0, the message is this form can´t be edit with adobe, use adobe livecycle designer. need I to buy another program?
I have adobe xi pro, but i can´t edit a form created with adobe 8.0. The message is: this form can´t be edit with adobe, use adobe livecycle designer. need I to buy another program?
If the form was created using LCD then it can only be edited there. This
application used to be bundled with Acrobat Pro, but that's no longer the
case. So if you want to edit this file then you need to purchase it, yes.
On Sat, Apr 4, 2015 at 6:39 PM, monicad4417911 <[email protected]>
Similar Messages
-
I have a IMac - Mac OSX version 10.4 and présently i see only verticals lines on my desktop and my mouse, i mean the arrow and still mouving but with a little square with vertical lines at the right. This appened when i was talking with a friend on Skype, by error i did click on the video and slowly the vertical lines appeared and covered all ma desktop. Since then, it still there and the only things i see it is the vertical lines and the arrow with the little square.
How can i fix this problem ?
En français: j'ai un IMac - Mac OSX version 10.4 et présentement je vois seulement des lignes verticales sur mon bureau et ma souris c'est-à-dire la flèche, bouge mais il y a un petit carré avec aussi des lignes verticales à sa droite. Je pense que ce bug est survenu lorsque j'étais sur Skype avec une amie et que par erreur j'ai cliqué sur l'image de la vidéo et peu à peu les lignes sont appurues et tout l'écran est envahie par ces lignes.
Comment corriger le problème ? Merci à l'avance.
Réjeanne BlouinHello, sounds like Video card and/or heat problems.
Have you blown the dust out lately? Let it cool for an hour or so.
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode). -
I have a gift card, but when I try to redeem it at the Itunes store, i receive a message that the redemption code is not valid. What should I do?
Try this ... https://discussions.apple.com/message/16622370#16622370
-
Why can I purchase music and books but not items for my game?
It is sound advice whether you believe it or not.
Have you tried ALL of the the troubleshooting steps here?
http://support.apple.com/kb/ts1702 -
My mac tells me that " The disc in this drive can't be erased"
What can i do to delete whatever I have in a dvd... format it or whatever..if my mac tells me The disc in this drive can’t be erased.
Unless the DVD is a rewritable DVD, identified as DVD+RW or DVD-RW, you can't delete what's on it.
-
I have paid my subscription for Adobe Acrobat Pro but can not install it… I always get an error message …also I did not receive any instalation code...
With the subscription you sign in with your Adobe ID that you used to order the subscription. By installation code, I assume you mean serial number. You do not get one with the subscription, but use your Adobe ID.
-
I am trying to download a book on my ipad. It says I need to install itunes. I have itunes already. I frequently get a message to re-install itunes. I do, but I still get the message, and I still can't get the book on my ipad.
you can download a new installer and serial number from Adobe at Adobe - CS2 Downloads
-
I have an iPhone and when I got it, I had a Toshiba laptop. Now I have a MacBook Pro, but when I try to wi-fi sync my iphone and new computer, it doesn't work because on my iphone it is still trying to sync with my old computer. How I can fix this?
Move the content from the old computer to the new computer.
Sync the iPhone via cable to the new computer and enable Wi-Fi syncing.
It should now be possible to sync via Wi-Fi to the new computer. -
I downloaded the free trial for Adobe XI Pro but now I cant find it on my computer or figure out how to use it. The only thing I see that downloaded is Adobe Download Assistant. How can I access the program?
Assistanttolindsey the Adobe Download Assistant will download the installation files for Adobe Acrobat Professional XI. By default they are saved to your download folder. You can begin the installation process from there.
-
HI, I HAVE A MacBook Pro 2.3GHz dual-core Intel i5 AND I WAN'T TO UPGRADE THE HARD DRIVE UP TO 750GB AND ALSO THE RAM MEMORY TO 8GB. WHAT SPECIFIC MODEL OF HARD DRIVE AND RAM MEMORY SHOULD I BUY??? THANKS
No need to type in all caps - we HEAR you!
I would take a look at the internal drives offered by both Crucial (click the link "Internal Hard Drives Now Available") and OWC. I would stay away from Western Digital drives as they seem to have problems on a number of Mac models.
You can also shop for RAM at Crucial and OWC - just select the System Scanner tab at the Crucial website to find out which memory is right for your machine.
Good luck,
Clinton -
I have a MacBook Pro and it is Software is Mac OS X Lion 10.7.4 (11E53). Is this the new operating system or I have to buy the new one? The only thing missing is the Messages.
And yes, you need LOTS of Internet to get the latest cat. The installer file is just 4.5GB in size, so on most internet connections it will take awhile to download. Once that happens, you will have a choice to install it on top of your existing Lion partition, or onto a different one, that can even be a totally blank one.
Since you probably don't want to redo the wait, be sure to quit the installer as soon as it finishes downloading and starts up automatically. Then save the installer (called "Install OS X Mountain Lion", and found in your Applications folder) onto another disk before going thru with the installation. When it concludes, it will erase itself. -
Just updated my iphone. Now I can se I have two! iCloud accounts? One of them appears on my phone, and I have forgotten the password. When I try to add the other account, I get the message that this account is already added, but with the name of the first account where there is no available password. I have tried several times to reset the password, bun I don't get the information I need - I have no access to email. What can I do?
Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
Anything else I could try, or am I doomed!
All of your help is much appreciated, thanks -
I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?
zoominnana wrote:
Can I set up 2 different time capsule backups? one for the lion partition and one for the snow leopard partition?
No, you can't partition a Time Capsule's internal HD. Both partitions will back up to the same sparse bundle. keeping the backups for each partition separate.
Time Machine will not take the two OSX partitions as two different computers, but for best results, exclude the Snow Leopard drive from backups on the Lion partition, and exclude the Lion partition from backups on the Snow Leopard partition.
There may be some files on the Lion partition that Time Machine on Snow Leopard won't like, among other things. See #10 in Time Machine - Frequently Asked Questions for details. -
Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki
Hi Cereskit
Thanks again for the message. I've done the updates and have the App Store on my desktop. I went into it and searched for imovie but couldn't find the basic imovie, which I presume is what I'd need for editing?, rather than imovie 11 for £10.49, which is for making trailers, it seems. Also, were you saying that imovie would be free?
Vicki -
I shared more than 3000 pictures in icloud, but when I try to watch them in another device I can only see 300. Is there a limit on the number of pictures I can share?
Quick Answer: Yes.
If you are looking at My Photo Stream, check this out: http://support.apple.com/kb/ht4486
How long are My Photo Stream photos stored in iCloud?
The photos you upload to My Photo Stream are stored in iCloud for 30 days to give your devices plenty of time to connect and download them.
How many photos are stored in My Photo Stream on my devices and computers?
iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.
Your iOS devices keep a rolling collection of your last 1000 photos in the My Photo Stream album. From there, you can browse your recent photos or move the ones you like to your Camera Roll or another album to keep them on your device forever.
Because your Mac and PC have more storage than your iOS devices, you can choose to have all of your My Photo Stream photos automatically downloaded. In iPhoto or Aperture preferences on your Mac, select Photos (or Photo Stream) > My Photo Stream > Automatic Import. All of your photo stream photos will be imported into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture. On your PC with My Photo Stream enabled in the Control Panel, all of your photos will be imported into C:\\Users\<user name>\Pictures\iCloud Photos\My Photo Stream. For iCloud Control Panel 2.0 to 2.1.2 users, the path isC:\\Users\<user name>\Pictures\Photo Stream\My Photo Stream .
If you are using a Shared Photo Stream, check this out:
http://support.apple.com/kb/HT5903 and http://support.apple.com/kb/HT5902
How many photos and videos can be stored in a shared stream?
A shared stream can hold a maximum of 5000 photos and videos combined. When you reach your limit, you must delete some photos or videos before adding new ones.
How long are iCloud Photo Sharing photos and videos stored in iCloud?
The photos and videos you share (and the comments or Likes associated with those photos) remain in iCloud until you or the contributor delete them manually, or until you delete the shared stream completely.
Maybe you are looking for
-
In Mavericks Mail I am unable to access the BCC: line for sending a blind carbon copy. I open my Contacts list, select a person, and when I click on the BCC: box above in the Contacts window, the person is not entered onto a line in the email for re
-
Wait Activity Problem in OBPM 10GR3
Hi all, We have a recent problem with our Wait Activity. We have a definite interval of 5 mins to the wait activity passed on through a business parameter. But for some reason, the Wait activity is behaving awkwardly. It sometimes, waits for less tha
-
How does RFC adapter with EO/EOIO work? Kindly help!
Hi Experts, How does a sender or receiver RFC adapter works when QOS is EO or EOIO (Async)? In other words, for EOIO, are the messages are queued? How does this queueing work? Does it use FIFO logic? where do we specify the max limit of messa
-
C: appending pointer to array of pointer
Hello. I am trying to code a html parser in C but I ran into some troubles. Well... first the relevant code so that you know what I am talking about. I have this structure which will hold an html tag. struct tag { char *name; char *content; struct at
-
How to display image in JFrame
i am comfortable with displaying an image in applets ,but i am not able to display image in JFrames i used Image img=getImage(getDocumentBase(),"sample.jpg");its displaying an error cant find symbol getDocumentBase()