I have always been able to connect my Ipad to the tv with the HDMI adapter but since most recent software update it does not work. Is it me or has others expeirenced this?
I have tried to stream movies and live TV using my HDMI adapter and cable . I have always had it work but with the most recent update it no longer will connect. I hope someone has a good solution.
It still works for me.
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
Similar Messages
-
i have always been able to zoom in on my photo by holding the cmd and space bar, that changed and now it creates a box and zooms in on that area and I can't zoom out using cmd space bar. How do I change it back to the original way of zooming?
Select the Zoom Tool in the tool box and see if Scrubby Zoom is unchecked or greyed out in the tool options bar.
(you want Scrubby Zoom checked) -
All of a sudden I keep getting the same message on both my Iphone and Ipad. (Cannot connect to Itunes Store.) (OK)
I am able to connect on my Mac. My Password is correct.Hi Velvalee,
While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
Cheers!
- Ari -
just recently i am unable to send any sort of e mails from my i phone using my aol e mail account. I am unable to forward pics to others via e mail. It simply will not allow, when i have always been able to before.
We took our MacBook Pro to the apple store, after a long trial and error, they FIXED the problem!
It turns out that one of the files was corrupt, it was either Java or Silverlight.
My suggestion to you is to remove Java than restart and then reinstall Java. See if hotmail works. If not, than, remove Silverlight reboot than reinstall Silverlight.
For us, it was one of those two files that were corrupt and that was causing hotmail to not be able to send email.
I'm not sure what the procedure is to remove and reinstall files, all I know is that my wives MacBook can now send email using hotmail.
Hope this helps.
Stephen -
I have never been able to connect to the itunes store. It always says"itunes could not connect to the itunes store. An unknown error occurred.(306) " So what does this mean and how can I fix it?
Hello zabetnz
Start with the article below to get access to the iTunes Store. If it does not work, then there are some links towards the bottom of the article for additional troubleshooting.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G. -
I have always been able to create playlists on itunes, then drag them to my ipod when it is plugged into the mac. I recently downloaded the latest version of itunes, and now am unable to do that. I can drag songs and albums to the ipod, but not my playlists. It used to be so easy, am I missing something here?
Plug your iPod into your computer, it will begin to sync. Now check to see if the playlists have been added.
If not, go to the songs tab under your iPod when it is connected to iTunes, Unless you have checked "Sync all songs (or something to those words)" you should have an option on what you can put on your iPod. Make sure to check the playlists that you want on your iPod. -
Cannot collect online to get to Kuler colors? Have always been able to in the past.
Cannot collect online to get to Kuler colors? Have always been able to in the past.
I have the same problem. It just stopped being able to connect. I do not have an IT person and so far the only advice I've gotten is to contact the IT. Hope somebody has an answer for this!
-
How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.Firstly how are you connecting to the TC.. wireless or ethernet?
Please open a command window and ping it.. ping by name and by IP address.
If ping succeeds at least by IP it should work.
In windows explorer type
\\10.0.1.1 (or whatever the TC ip is.. that is the default).
Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
7.6.4 firmware on the TC is useless. It works better on 7.6.1
If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls. -
I have always been able to open e-mail photo attachments even after transferring them to the desktop or a thumbdrive, but after moving the last two to the desktop and trying to open them I get the message that ColorSync is unable to open files of this type. I believe they are jpegs.
When I attach a PDF to Apple Mail on Mountain Lion, it is an icon. When I send it to an iCloud mail destination, the attachment arrives and is presented as an icon, whether on OS X, or in IOS 6.
I suspect that the recipient's mail user agent is responsible for the full image .vs. icon behavior, and there is nothing you can do to prevent it. -
It won't let me drag an effect from the browser all of a sudden. I have always been able to do before. I am using effects from favorites bin and when I try to drag it to the timeline, it won't move. I have never had this problem before. Please help.
P.S. I have tried other effects including transitions and it still won't let me drag.Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia -
I have always been able to sync my IE bookmarks from my desktop to Safari on my iPhone. Suddenly they are gone from my phone and they won't sync any longer. What am I doing wrong?
I have done this on numerous occasions but I think that my Iphone has a defect. After many tries, reinstalls, deletion of content, changing content to be stored on external hard drive, deleting itunes and cleaning computer I managed to get all of the songs on and things seemed okay for a while.
The problem returned about a week ago after downloading a new album from Itunes. I now have 12.5k of songs leaving 10gb spare on Iphone which should be more than enough room to operate properly. Last night it seemed to be dowloading ok (after doing all of the above again for the umpteenth time) this morning it revealed that it had just synched 2.5k of songs and 18gb of "other" on the contents bar. it wont synch now as it says its over capacity. So the 18gb of "other" would probably be corrupted data that means it must corrupt each song as it tries to synch it.
The 2.5k of songs it did synch are working on the Iphone as is every song in the library on Itunes. I did completely delete the new album I bought and redownloaded it from the store then tried to synch just that album and it worked fine.
Just about time to dump apple I think! -
I have always been able to keep multiple tabs open, but now can't open more than one tab?
I have always been able to keep multiple tabs open while working, but by mistake yesterday when I closed firefox I forgot to save all tabs before quitting. Now I can't open multiple tabs....only one.
This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbMTV/3.12.2.16749
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
I have always been able to burn a CD from my I-tines library but suddenly I am not able to. The message I get is no recording software. I have looked for some help and tried downloading Itines again, I have tried downloading other fixes - nothing fixes the problem. can anyone help please
Hi,
Thank you for using Apple Support Communities.
I see you want to burn a CD from content from your iTunes. The following article provides information on how to do that.
iTunes 12 for Windows: Create your own CDs and DVDs
Regards,
Jeff D. -
I cannot text message on the Ipad mini to people I have always been able to text to on my Iphone. When I try to send a message to a contact I get the message that this contact is not registered. Also, I cannot get all the messages I have sent in the past. Help
FaceTime and iMessage only work with other users with Apple's iOS devices.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
Cheers, Tom -
I have an iphone 4 and have always been able, until recently, to access emails and internet. I have tried resetting everything, without luck. Any ideas?
Hi Sampolitis,
If you are having issues with an iPhone accessory, try the troubleshooting steps in this article.
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
This article outlines basic setup and troubleshooting suggestions for using Bluetooth accessories with an iOS device.
iOS: Third-party Bluetooth headsets, headphones, and keyboards
http://support.apple.com/kb/ht1664
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Hope this helps,
Mario
Maybe you are looking for
-
Bug (possibly?): SelectManyShuttle fails to display selected items
Bug (possibly?): SelectManyShuttle fails to display selected items when valuePassThru="true" in ADF 10g Hello all, When run, the example below shows a Select Many Shuttle with four choices in the leading list. When items are shuttled to the training
-
How to restrict the change access in CRM for OLTP orders
Hi Guru's, Please let me know how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change, We have the orders that are created in ECC, it will flows to CRM and sho
-
Dynamic text in PI Alerts without using BPM
Hello everyone, Is it possible to have dynamic text in alert mail subject or mail details without using BPM in PI? If I want to configure generic single alert category for all interfaces in my project , and in the subject line of Alert mail, I need t
-
Conactenating with diffrent spaces
I have a req. of conactenating vaiables with diffrent space values. E.g. Var1, Var2 ,Var3............Var n need to be seperated by diffrent space values. Like Var1 Var2 Var3.. .. Varn or Var1 Var2
-
Kcsync asking for a password you don't know? Here's a solution
If you get a persistent request for a password when syncing your keychains here's the fix. open Terminal copy this string at the prompt and hit enter: /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/kcSync.app/Co ntents/MacOS/kcsyn