I have an airport extreme which doesn't come with a straight audio jack on it like the express. Can I get a converter to go from the dual speaker plugs to usb on the extreme?
I have an airport extreme which doesn't come with a straight audio jack on it like the express does. Can I get a converter to go from the dual speaker plugs to usb on the extreme?
Sorry, but no. The only Apple router with an audio output jack is the AirPort Express.
Similar Messages
-
How to install W.7 on 2011 Macbook pro which doesn't come with bootcamp dvd?
how to install W.7 on 2011 Macbook pro which doesn't come with bootcamp dvd?
Use the Boot Camp Assistant in the /Applications/Utilities/ folder to put the Boot Camp drivers onto an optical disk or USB thumbdrive.
(80603) -
I have apple keyboard that is in pouch type folder. Is there a battery somewhere in back
Please give more explaination. "Pouch type" does not bring any images to mind.
Wireless keyboards have batteries that install on the left top side. Wired ones, of course, have no batteries.
Barry -
Just let me know if you know how to fix this!!! I am in desperate help right now. It's been a month and still can't use it plus we are going out of town and was wanting to take it with us to use.
If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
Apple TV is blinking and requesting to connect cable with itunes, why? I do not have the USB cable since it doesn't come with the Apple TV .
Hello folks
I had the same problem today: Apple TV is blinking light and requesting to connect cable with Itunes (Itunes Logo appears)
I solved the problem according Alley_Cat mentioned and described in link bellow:
In my case, I restored factoring setting using a Micro USB Cable connected in Itunes
Follow the steps carefully described in link bellow
Good luck.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US -
have an airplay enabled AV Receiver - how do i set up Airplay
I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
Do I need Apple TV or to change some settings somewhere?
Any help would be greatly appreciatedYou are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
About AirPlay Mirroring in OS X Mountain Lion:
http://support.apple.com/kb/HT5404
iOS: Recommended settings for Wi-Fi routers and access points:
http://support.apple.com/kb/HT4199
Troubleshooting AirPlay and AirPlay Mirroring:
http://support.apple.com/kb/TS4215
Good luck in setting up 802.11 wirelesss network. -
I have an IPhone 4 which I just updated with the latest software, which put in it in Recovery Mode. It has the picture of the plug with ITunes, I downloaded it now its saying its in Recovery Mode, how do I save all of my previous data without Restoring?
I updated the phone before backing it up on iTunes, now the update wanted me to connect the phone with iTunes and it says the phones in recovery mode and it must be restored before its used with iTunes. I go to click restore and it says it will reset it to factory default and I'll lose all my current data. I have all my sons pictures and videos along with this notes. I can't lose all of this data! Please help!You have to restore the iPod, no ifs, ands, or buts...
After iOS is installed you will be asked if you what to set it up as a new iPod or if you want to restore from a backup.
If you have a good backup you can restore that and you're good to go.
If you don't have a good backup, then you end up with a "clean" iPod.... -
My old iPad 2 is updated to ios 7.1.2 but I have a new 4 which is only compatible with 7.0.4 from setup. How can I backup my account to the new iPad with this incompatibility?
What you need to do is temporarily set up your new 4. Just long enough to update the operating system. Then you can erase all content and settings - which puts it back to its out of box state, then set it up again, this time restoring it from the backup of your two.
So, using the same Apple ID on both - just to keep things easy - set up your 4. Just basically choose 'set up as new' to activate it, then immediately update the iOS to 7.1.2.
then erase all content and settings, which puts it back to 'llike new'...but the operating system will not reset, it'll remain 7.1.2
Then set it up again, this time choosing to 'restore from the backup' of your 2 and your 4 will be a near clone of your two. -
I have a net gear wireless router and a APE working great inside the house, but the wireless signal is weak in the backyard, can I get a net gear extender for the back yard and it will boost our wo
Ireless signal and also send my music to the airport express? Or does the airport express work as a stand alone hub?Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods -
I have a Maxtor 3200 which has stopped communicating with my iMac for no reason can you help i'am running the latest system
I have never seen this before. Try using these installers
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers) -
hi, im tinkering with mpeg streamclip and its giving me problems because it won't open my ripped dvd files from my desktop. It keeps giving me the same message "no VOB files can be found". Can anyone help me, this doesn't make sense. I also found online that you need Apple Mpeg-2 playback component in order to use mpeg streamclip. Even though I have OS X Lion, should I download the add-on?
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7. -
I have lightroom 4 and it doesn't work with d4s raw images? what can I do?
i have lightroom 4 and it doesn't work with d4s raw images? what can I do?
That model begin to be supported only in the very latest version of Lightroom, version 5.4. You will either need to upgrade Lightroom, or else use the latest version of the free Adobe DNG converter (version 8.4) to create digital negative copies of your raw images. Then you can import those DNG files into the Lightroom that you have now. The choice is yours.
-
How can I get my iphone 4s to connct to my itunes? Says I need the 10.6.3 so I down loaded itunes 10.7 which tells me I need a 10.6.3 operating system and my mac is only a 10.5.8. What do I need to do?
You will need to upgrade to Snow Leopard first - if your Mac can run it:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $30. You can also purchase the code to use to download Lion from the same number.
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard. -
I have an ancient laptop (from 2005) that has my entire music library. This laptop barely works and some keys don't type anymore. How can I get all this music transferred to another computer, or available to me on the cloud?
No... do not move programs.
About the iTunes library files
Your iTunes library files track the media you add to iTunes, how you've organized it, and other information such as playlists. By default, these two files are in your iTunes folder:
Mac OS X: /Users/username/Music/iTunes/
Windows XP: C:\Documents and Settings\username\My Documents\My Music\iTunes\
Windows Vista: C:\Users\username\Music\iTunes\
Windows 7: C:\Users\username\My Music\iTunes\
Windows 8: C:\Users\username\My Music\iTunes\ -
I have deleted some photos from camera roll which are taken by today but my icloud is bacuped on yesterday night.how can i get those photos.please anyone tell me because they are very important
Are those photos on PhotoStream?
Maybe you are looking for
-
Using Captivate 5.5, I've inserted an image on the slide that is wider than the slide itself. The right edge of the image lines up with the right edge of the slide. I want to add an effect to the image so that when the slide appears, the image appear
-
How do I ensure my data is all gone and can I sell it with the 10.8.2 I purchased last year (new 27" has 10.8.2 already)? THANKS!
-
Loading Data from multiple tables into essbase using ODI
Hi, We have a scenario where data comes from multiple tables. I would like to know how will ODI load this data for the right combination of the members
-
How to move from one report (with positive Qty) to another (Negative Qty) ?
Hi all, There is Quantity column in BEx query and I have a Calculated Key Figure on Quantity to have only POSITIVE values (> 0). Now the requirement is to have another report which are excluded from first (main) query because of NEGATIVE values
-
Auth setting for IT0006 lock record
Hi All, Can anyone guide me how to set up authc object for locking IT0006 record through portal webdynpro address application? I have following setup but i am getting "you have no authorization to insert" error message. I am not sure what we are mis