I have an AirPrint printer and am signed up for the wifi 3G service but will not have wifi. Can an IPad be hooked to a printer with a cable, or can I print somehow without wifi?
I have a new air print-capable printer and am signed up to Verizon wifi+3G service but will not have wifi while traveling. Is there anyway to print from my iPad in this situation? Cannot the IPad be hooked up to a printer with a cable? If not, this seems to me to be a real shortcoming with an iPad!
iPads cannot be connected to a printer using a cable.
You need some form of Wi-Fi network to print. You do not need to have that Wi-Fi network connected to the internet. There are some devices that will create a Wi-Fi network and allow you to print. Google it to find someplace ossicle solutions.
Similar Messages
-
I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an additional antennae? If so, which one because my research is confusing me about what is supposed to work with this computer.
Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.
-
Need to erase hard drive and reinstall system on iMac but have misplaced original install disks. Tried to use a my copy of Snow lepord 10.6 from my Mac Pro but will not boot. Can original install disks be replaced. Thanks
Yes the original Install Discs can be replaced for a nominal fee. Call AppleCare, you will need a credit card and the serial number of the machine. You can use the AppleCare Contact Info for the phone number on your part of the planet.
-
I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474 -
Trying to sign up for the Apple iOS Developer but I think that the payment is not received
Trying to sign up for the Apple ios Developer but I think that the payment is not received.
In the developer's site Register ״Pending Enrollment״ and it waiting for payment even paid thet the I get accept to my mail with the payment details.
What to do?
ThanksPlease read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
My iCloud system preferences is asking me for my apple id password, but will not let me click ok, forget, or sign out....just makes this annoying noise .....so now i can't even use my system preferences at all....all i can do is hide sytem preferences.....Please help?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.
-
please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!. thanks
Place the iPOd in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
I dropped my mac pro. The disc drive plays but will not record. medium drive error. How hard is it to replace the drive my self. i see screws on the bottom. Could I just order a new internal drive and replace it? Or is it too complicated for the average person? Would be cheaper to buy an external drive than to replace internal one? Any advice is appreciated
How certain are you the superdrive ONLY is at fault?
That depends on your skill level, if you grew up tearing things apart and putting them together, its absurd how easy it is.
For some however its too daunting. On a general skill level for the "average" person its about a 3 out of 10 in difficulty.
Can you order same? yes. -
i currently use ADOBE PHOTOSHOP ELEMENTS 9 to Download and Edit my Photos from my Camera.
Now, I just signed up (under the Monthly Plan) for the New REVEL Service. How do I Download it to my Computer.
My Computer uses the WINDOWS 8 Operating System.
HELP,
TOBYHi Toby
Welcome to Adobe Revel! You do not need to download anything right now. Currently on a PC you access Revel via adoberevel.com on a web browser.
Here are some useful links for you that might speed up the learning curve. They show you how to do things in the browser version as well as Mac and iOS. PC users can not edit using adoberevel.com. The apps include editing. Since Elements versions prior to version 11 do not connect to Revel, you can save to your hard drive and upload to Revel from there.
You can sign up to be notified when a Revel app is available for Windows and Android by going to http://www.photoshop.com/products/revel ….scroll down and look on the right side where it says "coming soon- Notify me" for windows or android. Click and you can sign up to be notified.
In the coming months, we will expand Revel onto new platforms, devices, and file formats.
Pattie
SHARE
FAQ: How do I share my photos in Revel?
http://forums.adobe.com/thread/1295026?tstart=0
UPLOAD
FAQ: How do I add (upload) files to Revel?
http://forums.adobe.com/thread/1162795?tstart=0
DOWNLOAD
FAQ: How Do I Download files from Revel?
http://forums.adobe.com/thread/1166462?tstart=0
EDIT
FAQ: How do I edit photos in Revel?
http://forums.adobe.com/message/5088287#5088287
DELETE
FAQ? How do I delete a file in Revel?
http://forums.adobe.com/thread/1162793?tstart=0 -
I installed a new wireless router on Tues. (May4) up until that time I had no problems using Firefox. Now I cannot get it to open on one computer, and the other it will open but will not load. Wondering if it has anything to do with the router, my provider or our computers. Again, it had been working fine. I am also unable to open interent explorer now on either computer.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; AOL 9.0; Windows NT 5.1; GTB6.4; AskTB5.6)Sounds like a problem with the router installation/configuration (likely) or a DOA router (very unlikely).
Visit the forums for the router manufacturer (i.e., linksys, d-link, etc.) and ask for assistance there. There is probably a link to help listed in the router manual. -
I'm at work and my MacBook Pro is connected wifi but a web page will not display. Other have the pros and is connect. Tried restarting but not working
You're not a liar. They should not charge you $90, it is within the 1-year warranty that comes with it and you are entitled to a free replacement. I have never had the problem myself on a 15 month old MacBook, so there must be SOMETHING that happened to it, maybe without you noticing. But might I recommend a wireless trackpad or Apple "Magic Mouse?"
-
I have the Time Capsule hooked to a wireless modem. It uses a static IP, which is put in and running. The MBPr connects, as well as my iPhone 5, to the internet and network without problem. I can see the Mac Mini, external drive attached to it, and the Time Capsule. The Mac Mini connects to the network wired or wirelessly, but not to the internet. On wireless, using AirPort the Internet shows green, but no connection when I open Safari. The settings under network settings are identical except for LAN IP between the Mac Mini and the MBPr. I was hoping someone might have an idea of what was going on. Before I moved the Time Capsule was on Bridge mode from another router, now it is on DHCP and NAT for the internal network.
No, its is connected direct to the providers fiber box.
-
I purchased it in December and three days ago it kernel panicked twice. After the second event, it will not boot at all. The charge cord is green when it's plugged in and seems to indicate the battery is fine. When it went into kernel panic, the trackpad locked up. I had a technician open it up to see if there were any obvious issues and everything looked ok visually. I can't boot it into safe mode or anything involving powering the machine on, as it is not responding to anything. I have a major test coming up in five days that I am taking on this laptop and am desperate for answers. Any information you can offer at all would be helpful.
Try SMC and NVRAM resets:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
Then try a safe boot again:
http://support.apple.com/en-us/HT201262
Ciao. -
Iphoto crashed and will not start. How do I save my existing photos and videos and reinstall Iphoto?
reinstalling will not cure this - you need to rebuild your library- Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
And the ONLY way to "save" your photos and videos - and every other file on your computer - is to always have a good current backup - sooner or later your disk will fail and with no backup you will lose everything
LN -
Can I cancel my monthly Creatve Cloud membership and then sign up for the Photographers Plan?
I have had the Creative Cloud Membership since it was first offered. I use only Photoshop and want to change to the less expensive Photographers Plan. Is this possible?
Hello Tamera,
here are two links where you can cancel the membership:
http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html and maybe
http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html
If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
On the other hand you have to look at Subscription Terms >>> http://www.adobe.com/misc/subscription_terms.html to see the conditions for a (early) cancellation.
After that procedure you can conduct your other membership.
Good luck!
Hans-Günter
Maybe you are looking for
-
Laserjet 4240n driver does not work with windows home premium 64 bit
I recently was given a HP laserjet 4240n by my employer to use in a remote office. I am using a Windows version 7 home premium 64 bit laptop. I have tried the HP install wizard - no support for this printer. I have tried downloading the "correct"
-
How can my iMac support 2560x1080 external monitor (LG 29EA93)
How can my iMac support 2560x1080 external monitor (LG 29EA93)? Please, help on this issue? iMac 2012 Late NVIDIA GeForce GT 640M 512MB OS X 10.8.5 (12F37)
-
Difference in email ids specified in preferences link
I wanted to understand the difference between the email ids specified in the links Preferences->General and Preferences->Notification schedule in Oracle 11g database enterprise manager. From the documentation I have seen, it appears that that the not
-
One of my contacts is reduced to a single blue line
I have one contact, and only one, that appears in my message list as a single blue line, where all of the others are properly displayed with the name of the contact. Does anyone have any ideas as to how I can get that one contact to display properly.
-
SCCM 2012 Asset intelligence: should we use it?
Hi, I'm looking at the asset inteliggence feature of sccm 2012. The question is if we should spend time configuring it or not. Therefore this question: do you use it? If yes, what is the added value and can you refer to some screenshots which summari