I have an epson T50 shared network, which is connected to a computer that runs on Windows 7 64-bit. The 10 days Apple has updated the printer drive and since then has been trying to print the following message: / Library/Printers/EPSON/InkjetPrinter2/Filt

I have an epson T50 shared network, which is connected to a computer that runs on Windows 7 64-bit. The 10 days Apple has updated the printer drive and since then has been trying to print the following message: / Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS/ rastertoescpII failed.
What should I do?

The first thing you should do is re-write your post to make it a bit more understandable. I got you have an Epson printer connected to your PC, however after that  your post doesn't make any sense. Are you attempting to print from your iMac, if so then you need to download and install Bonjour for Windows on your Windows machine. Then set Windows so it has printer sharing turned on and then on the iMac simply follow Apple's instructions for adding a printer.
http://support.apple.com/kb/DL999
http://support.apple.com/kb/HT4670

Similar Messages

  • I have an Epson 2200 which was in perfect working condition until just now when I received the following error message: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /.  What to do???

    I have an Epson 2200 which was in perfect working condition until just now when I received the following error message: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /.  What to do???

    Hello kelsey1942,
    It sounds like you are not able to print to your Epson 2200.  I found an article with steps you can take to troubleshoot printer issues on a Mac:
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Additional Information
    Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB.  For more details, see this article.
    You can find the full article here:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I am running XP SP2 fully patched. I recently upgraded to 3.6.3 and since then, clicking on an icon that normally would open another windows (for example, a printer-friendly version of the current web page), nothing happens. In these situations, I have be

    I am running XP SP2 fully patched. I recently upgraded to 3.6.3 and since then, clicking on an icon that normally would open another windows (for example, a printer-friendly version of the current web page), nothing happens. In these situations, I have been forced to go to IE or Crome in order to accomplish what I need to do. Very frustrating. Also clicking in the slider area has no effect. "Page Up" and "Page Down" keys work. Holding down left mouse button on slider works. Also very frustrating. Can someone help
    == This happened ==
    A few times a week
    == Upgraded to 3.6.3.

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • I just upgraded to OSX version 10.8.3 and since then all animations are defective. The dock is jerky! The effects of opening and closing windows ranging in shots!  What should I do?

    I just upgraded to OSX version 10.8.3 and since then all animations are defective.
    The dock is jerky!
    The effects of opening and closing windows ranging in shots!
    What should I do?

    You can check the status of your drive's indexing by clicking the Spotlight menu to see if there is a progress bar at the bottom of it, and can also open Activity Monitor and click the "%CPU" column to sort by CPU usage, to see if the processes "mds" or "mdworker" are currently active and using your CPU.
    If so, then wait for them to finish. However, if not then try rebooting and then hold the Shift key immediately after you hear the boot chimes. This will load the system into Safe Mode, which should run some checks and maintenance routines on the system. Then reboot normally to see if the problem persists.
    How much RAM do you have installed on your system? You can see this by choosing About This Mac from the Apple menu.

  • I just installed an update on my iPhone and since then the choice to repeat music, or not, has disappeared and it automatically plays songs and albums on a loop. Anyone know how to make it play an album or song just once?

    I just installed an update on my iPhone and since then the choice to repeat music, or not, has disappeared and it automatically plays songs and albums on a loop. Anyone know how to make it play an album or song just once?

    Basics from the manual are restrt, reset, restore.
    Have you tried each of these?

  • My Mac was updated to Ÿosemite OS and since then the PS5 software doesn't open. I need help on this subject please.

    My Mac was updated to Ÿosemite OS and since then the PS5 software doesn't open. I need help on this subject please.
    They error message I get is "An unexpected and unrecoverable problem has occurred. Photoshop will now exit."
    This only started after I upgraded my OS to Yosemite.

    The upgrade has been know to break Photoshop CS5 installs. An Uninstall/Reinstall may be necessary.

  • I updated my itunes version and since then it won't let me connect to the itunes store. I'm connected to the internet but it says I'm not.

    I updated my itunes version and since then it won't let me connect to the itunes store. I'm connected to the internet but it says I'm not.

    Can't connect to the iTunes Store
    What happens when you try to delete apps?
    You can't delete the apps that came with the iOS

  • I recently updated to the new adobe flash 10.3.181.26 and since then I have not been able to listen to any videos online especially youtube videos. Though I can still see the videos I can't hear them.

    I've tried multiple times checking the settings with flash and I've checked and unchecked "hardware acceleration" and I've cleared my cache and cookies multiple of times. I've uninstalled and reinstalled flash many times to but still I have this issue. My computer alone plays music just fine only through flash videos do I have a problem

    Hi X-Calibar, thanks for your comments. Yes, there are 4 zones under Internet Options and security settings. IE9 from what I have read has more security features than IE7/IE8 had. It appears this Server verification involves status of the Certificate that the website has as well as the Server that is using it. From what I've read on the IE9 sites, Microsoft states that if any HTTP sites are in the Trusted Zone, that the Server Verification is to be UNchecked.
    When you go to add a site to the Trusted Sites zone, it by default only accepts HTTPS sites.
    I would think that would only be if you had the SV box checked, that's what I find with IE8.
    http://windows.microsoft.com/en-US/windows7/Search?q=what+is+server+verification+in+IE&prd =Windows7
    I think you and I may be saying the same thing, just in a different way:-) Not using IE9, I don't know how all of the new features work. My concern is mainly limited to any feature that conflicts or effects Flash Player. Just as the ActiveX Filtering. That certainly effects Flash Player, so that is on my radar:-)
    Hopefully, Chris Campbell will clarify some of this:-)
    Thanks,
    eidnolb

  • I chged my internet provider and new email address and  cloud is not recognizing this chg.  i deleted my old email acct from ipad and added new acct and since then i cannot send email nor the cloud will recognize the new email address.  do i need to sync

    i chage my internet provider and therefore email address. i deleted my old email address from my ipad and now i am not able to email from new email address nor will i cloud recongnize my new email address which is my apple id now.  since i deleted my old email acct   the cloud is not allowing me to chg this address in settting.  the cloud still has my old email address listed. 

    See Here > Apple ID: Contacting Apple for help with Apple ID account security
              Ask to speak with the Account Security Team...

  • I have LR2. On Adobe I updated to LR2.7 and since then having problems editing images in PS6.

    I select image in LR2.7 to edit in PS6.  It launches PS6 but image does not come through.  It comes up with message "the file could not be edited because CS6 could not be launched" when in fact it has launched CS6 but not the image.
    I have uninstalled LR2 a few times and reinstalled it and when I leave LR2 I can select image to edit in CS6 and it works okay but when I update on Adobe website to LR 2.7 it starts to play up and not work.  What is the problem? 
    Can anyone help with this as I am starting to tear my hair out.  Have had this problem for a couple of months now and cannot do my work.

    Firstly thanks for your responses.
    I have Windows 8 not Windows 7. 
    I have brought down the UAC setting but it still does the same but I just answer yes and it opens CS6 Extended but not the image.  The fact is that when I ask in LR to edit in CS6 it tells me it can't open CS6 but it does open CS6 but not the image.  Even if I ask to "open as smart object in Photoshop" it does not do it.
    No matter where I start Lightroom from it still does the same.  I only used Bridge a couple of days ago for the first time so this problem has nothing to do with Bridge.  When I select an image in Bridge it does bring it up in CS6 when I ask so this works fine.
    In LR/Photo/Edit in, if I select "Edit in Photoshop.exe" it works - it takes the image and gives me the option of edit a copy with LR adjustments etc but if I go LR/Photo/Edit in "Adobe Photoshop CS6" it just opens up CS6 and not the image plus gives me the message "the file could not be edited because CS6 could not be launched" when it has launched.  So should I just use "Edit in Photoshop.exe" or not - I don't fully understand all of this so maybe you could explain in lay terms.
    As I said earlier, it has only recently happened, in the last couple of months.  Before that I had no problems so I don't know where this problem came from.  The only thing I can remember is one day I was playing around with the preferences and maybe I have done something with that in LR and CS6 but I don't know.
    Hopefully this will answer back some of your questions but it has nothing to do with Bridge as per your views in the posts below.

  • I was in the middle of updating my ipod to the new 6.0 software when it died and since then my ipod screen is just blank or it will become grey and stay like that what do I do?

    pls help

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I recently updated to iOS 7 and since then, my music sound stops playing in the midst of a song. How do I fix it?

    It just stops playing whether I connect my earphones or sync it into my car Bluetooth. Help??

    Hi mzjulee,
    Thanks for visiting Apple Support Communities.
    If your bluetooth connection isn't working intermittently, the steps in this article can help:
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    All the best,
    Jeremy

  • I upgraded to firefox 4 (from 3.x) and since then I can't scroll using the trackpoint on my IBM R40 laptop. It does work in other applications including foldres, explorere etc.

    It worked until I downloaded the last version of firefox, and it still works with any other application except ff.

    Apparently it's related to the Firefox plug in.
    This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
    1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
    2. Select to "Options
    3. Select "Applications"
    4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
    5. Open a test PDF. It should open in it's own window now.
    Again, not a complete solution but something that'll at least let you scroll with PDFs open.
    More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

  • Ever Since the Last Apple Security Update...

    i loaded the last Apple Security Update on 06/02, and since then i have had OSX quit unexpectedly (twice) and have had FireFox quit as well. i have also had the cursor freeze and have had to force quit and restart my machine. My machine also seems to run a little hotter lately and i have not heard the fan come on for quit some time-- all of this since i downloaded the last update.
    Has anyone else seen this in their machine? is this a sign of a coming apocalypse?
    Anybody? Bueller?
    Thanks for any helpful tips...
    Powerbook G4   Mac OS X (10.4.9)   80 GB HD(new in 05/06)

    Nancy:
    If you did not Repair Disk Permissions in Applications > Utilities > Disk Utility before and after installation, go ahead and do so now. Here's how:
    While booted from your internal HDD
    Go to (Applications > Utilities > Disk Utility.
    Select your HDD (manufacturer ID) in left column and First Aid in main column.
    Click Repair Disk Permissions at bottom left.
    Next, try starting up in Safe Mode, log in, empty Trash, restart normally and log in. See if this helps before we take any other meansures.
    Please post back with update or further questions/comments.
    Good luck.
    cornelius

  • TS5376 was asked to update itunes and since then itunes won't open, un-installed it and followed the necessary steps then tryed to install it from scratch but still no luck. It says it has been successfully installed but no sign of it on my computer

    was asked to update itunes last week and since then itunes won't open, un-installed it and followed the necessary steps then tryed to install it from scratch but still no luck. It says it has been successfully installed, but no sign of it on my computer.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

Maybe you are looking for