I have an error in Verify disk permission and i can not fix it

I have an error in Verify disk permission and i can not fix it ,is there any solutions ?

I have 38 GB (other) in my storage ,I have 120 GB storage and this other part bothers me,is there any suggestions please ?

Similar Messages

  • Disk Utility can't "Verify Disk Permission" and "Repair Disk Permission"

    I booted up the Leopard 10.5.5 server from the Install Disc, and tried to do disk checks on all drives using Disk Utility.
    When the system drive was selected all the "Verify Disk", "Repair Disk", "Verify Disk Permission" and "Repair Disk Permission" functions are able to perform, however, if the non-system drives are selected only "Verify Disk" and "Repair Disk" are able to perform, the "Verify Disk Permission" and "Repair Disk Permission" are GRAYED OUT ! and UNABLE TO perform the permission check and repair!! Any idea ?

    Hi, I'm having a problem could be related. I've a 3 years old Xserve (not intel) with 3 HD managed by the apple original RAID board, all that running Mac OS X 10.4.
    I remotely manage the server from my mac running OS 10.5.6 and Server Admin 10.5.3.
    Well, I simply cannot propagate permissions because when I do it, Server Admin freezes and i must force it to quit. Obviously, privileges are not propagated.
    All that di NOT happen 1 month ago when i was "happily" running Mac OS X 10.3.x and Server Admin 10.3.x. Upgrading has been a big boomerang.
    Any idea? Thanks

  • I have a problem in activate Alaaclaud account and I can not open the device

    السلام عليكمI have a problem in activate Alaaclaud account and I can not open the device

    Standard troubleshooting...
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    If still a problem restore with your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    If still a problem, it's likely a hardware issue.

  • HT3702 Dear Customer Support... I have some problem with In-App Purchases and i can not Report a Problem  in Itune

    Dear Customer
    I has one Iphone and I have some problem with In-App Purcases Because my sister purchased In-app when she play
    and i can not report a problem in Itune,
    I inadvertently purchased all of this application in Order Number: MH*****4H5  Date: 04/09/12 ,Order Total $36.81
    So i can't use App store on my phone Because have problem Billing info and i dont want this order, I inadvertently purcased all of this application
    Hopefully I can ge help from you as well.
    Best Regards
    <Edited By Host>

    These are user-to-user forums, you are not talking to Apple here. All purchases are considered final, but you can try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I installed a blank cd to burn which I have done before but nothing is happening and I can not eject the cd

    I installed a blank cd to burn a playlist which I have done many times but nothing is happening and I can not eject the cd and when I try to close ITunes I get a message saying a cd is burning but nothing is happening and I can not do anything in ITunes

    I have this tip in my notes to eject a stuck disc, but not even sure if I have used it before -
    Restart computer while holding "option" key, when hard drive icon appears, release "option" and hold "eject" key.
    Hope it works!

  • I can not take pictures or back up my phone due to error message not enough storage.I have all of my data turned off and still can not back phone up.? I have deleted lot of pics and messages and still get message..

    I can not take pictures or even back my phone up due to error message not enough storage I have went into manage storage and turned all my apps to off and I still get error. I also have deleted a ton of pictures and apps.

    Hi there mistib,
    You may find the information in the article below helpful.
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/ts1503
    -Griff W.

  • Disk Utility and DiskWarrior can't fix my hard drive. How?

    For some strange reason, my startup external Firewire hard drive decided not to work.
    Used my Mac internal startup disk and ran Disk Utility and I got this only error message:
    *Error: The underlying task reported failure on exit*
    Couldn't even mount it. So, I ran DiskWarrior 4.1 and the external FW HD showed up as an *Unknown Disk* and it stated +Directory cannot be rebuilt due to disk hardware failure (-36, 2268).+
    Ran TechTool Pro 4.6.1 and the FW HD passed the Read Write test but failed on the Surface Scan with lots of bad blocks.
    So, is this a gone case? Any other method or utility to revive the FW HD?

    Hard drive failures are not that uncommon because hard drives still have moving parts. Since TechTool's surface scan came back with a lot of bad blocks and DiskWarrior noted that there was a hardware failure, my guess would be that the disc itself may be damaged or scratched.
    There are companies that can recover data from damaged discs, but I would not put too much effort into reusing this particular drive.
    Keith

  • I got an error message while burning a cd in itunes - "The attempt to burn a disc failed.  The burn failed because of a medium write error.  What is that and how can i fix it?t

    I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed.  The burn failed because of a medium write error."  What does this mean and how do I fix it?

    The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.

  • I Have an email the recently went invalid and I can not open my apple settings. When I put in my password it keeps saying invalid id because the email is invalid. How do I reset to a new email or merge accts to another email without deleting all items i

    Need help merging or resetting apple id
    I have a email that recently was closed out and can not open
    This email was my apple id

    You will wait for the rest of your life. You need to fix it; no one else will. To turn off "Find my iPhone" and its associated Activation Lock you need the Apple ID and password that were used to turn it on. If you know the Apple ID you can contact Apple Account Security and have them reset the password (after you prove you are the rightful owner of that Apple ID). see: http://support.apple.com/kb/HT5699.
    If you don't know the Apple ID the phone is permanently unusable.

  • HT1212 i have a problem, my iphone is disabled and i can not get into it. the power button does not work and the computer i used before i do not have. icloud was not set up on it either. And it will not allow me to connect to my itunes. So what can i do t

    i have read ur forgotten password or device disabled after entering wrong password. iphone is desabled dont have computer i conected it to before and power button is broke so how can i get back into my iphone?

    You will have to restore the phone and set up as New. See: http://support.apple.com/kb/HT1212. The part you need is near the bottom, "If you have never synced your device with iTunes...". You will lose any content that is not backed up in iCloud.

  • I have a Office Jet Pro 8500 printer and I can not get it to print 8x11 pictures keep getting 4x6.

    Have all setting set for 8x11 paper and on final I only get picture to fill 1/4 of sheet. What needs to done to get full 8x11 prints

    Hello mariamac80,
    It sounds like you cannot print from your network printer on your MacBook. Printer issues can be a but tough to nail down, but I would recommend trying the troubleshooting in this article named:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Error when Verifying Disk.  Any hope of not having to format?

    Installed updates the other day, and my Macbook Air would not boot after this. It just sat there with the Apple logo and the circling clock deal below it.
    I had a Snow Leopard DVD which I hadn't gotten around to installing yet. Booted off of it and ran the Disk Utility. It found the following:
    "Incorrect block count for file http/%2F%2Fwww.apple.com%2Fstartpage%2F.webhistory (It should be 2 instead of 0 )" and "Invalid sibling link"
    I then selected "Repair", but it reported that the disk could not be repaired
    Incidentally, I also selected the option to install Snow Leopard at this point, but it did not list my hard drive under "Select target drive" or whatever the installer says.
    Many are suggesting I just format the disk and install Snow Leopard to see how that goes. But I worry whether the drive is physically failing, and whether that would be a waste of my time and I should just replace the drive under my warranty. Is there any different utility I could use or any other hope of getting out of formatting and starting all over? I do have backups of my data, but it's just one of those things. I want to exhaust all my options. Thanks in advance.

    I had this issue once before on my MacBook. The only other way to fix the issue is to invest in DiskWarrior and see if that will help.
    I'd go ahead & erase the drive, restore your data, and see if the problem comes back. If so, get the drive replaced.
    You also want to check your backup drive & make sure it has no issues as well.
    ~Lyssa

  • HT204053 I have another Apple ID from when I originally set up this iPod, now I can't reset it as I am also set up with Find My iPhone which may have been doen by mistake I have been in contact with Apple itself and they can't fix the problem so far

    i have originally forgotten my pass code for a new iPod Touch, now I have with Apple's help reset it to factory, my issue is due to the change in my Apple ID , the iPod will not  let me set it up under the new Id or the old one.I also have been set up with find my iPhone and I don't remember if I did this or not, could have been the grand children trying to help out. Any ideas or suggestions, I haven't even used this yet and I have owned it for 6months already. Really am disappointed that the process is so difficult to navigate.

    I have also noticed the same "problem".  I do not fully understand the impact of using the same ID on multiple computers and devices if I want to keep them all in sync.

  • I get ( nsurlerror domain error 1012 ) what is it and how can I fix it ???

    Can anyone help fix the 1012 error I get when operating the gumtree app

    Hi,
    Try restoring your iPod OR uninstalling iTunes and then reinstalling iTunes.
    xxmitchxx90

  • I still have that stupid pacman sound effect playing and I can not get rid of it. I have researched this for weeks and weeks and have tried everything. I need a sure fire way to track this thing down and stop it.

    Do not have cool previews, have deleted, cleaned, rebooted, removed everything according to all the online help, but still have this stupid sound.

    Try running Firefox in [[Safe Mode]] and see if that helps!

Maybe you are looking for

  • Error when Generate PDF File on SAP BW 7.3

    Hello friends i have a problem. I have a report that was built using the web designer deployed on Production Environment.  This report has the option for print a PDF file but this process fail.  I ran the SAP Support Desktop tool  over SAP BW and i f

  • Problem in running TreeTable component with Myfaces

    Hi, I am trying to run treeTable component of adf with Myfaces. The tag is rendered but not functioning properly. It shows one level expanded as mentioned below : > H1 // H1 has 2 related records +> H2 // H2 has 3 related records +> H3 //H3 has 1 rel

  • How to avoid editing a deleted record in a Table component

    Hi! Everyon, I am building a prototype using JSC. In Page1.jsp, I have a table displaying the records. On column one there are buttons that allow the user to edit the record, including deleting it. My problem is: when somebody else deleted a record a

  • MacBook suddenly shutdown after opening anything that something that got to do with Flash

    Happened today, I was rendering a video last night and I let my MacBook stay all night with brightness +0 So, I wake up this morning realizing that my MacBook was sleeping and the battery was on 0% Okay, so here's my problem.. Ive plugged in my magsa

  • Keyboard won't select range of files, except...

    Some time ago, I discovered a problem: When I highlight a file in Finder, then highlight another file while holding down the Shift key, none of the files in between are highlighted. In other words, I can't select a range of files for deleting or modi