I have an error message even after reinstalling itunes...

Hi,
My itunes wouldnt work on windows PC-tried reinstalling it and the ran it-Error message came up as follows.
Any ideas?
In the mean time, I will remove the program again and try it one more time.
Thanks

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Similar Messages

  • Error Message even after Uninstalling ITunes

    I am getting an error message that says "The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll. Even after uninstalling ITunes from my computer. Can anyone help me fix that?
    Thank you in advance.
    Jenny

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • HT4059 I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't

    I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't cheap.

    Hi I had a similar issue to you, I could connect to the router but no internet. Here is my explanation of how I sorted it.....I hope this works for you.
    *To anyone that is reading this it appears that the problem lay in the airport setting: IPV6: set to 'Automatically'. I turned it off (after reading someones plight on MacFixIt) & everything is back to normal.*
    *The worrying thing is although my problem was extreme with other computers on the network being locked out nothing was changed, one minute it worked the next it didn't. Reading on other forums it appears to be a problem with laptops (but I could be mistaken). A lot of people on the Macfixit forum are complaining of network just dropping out even when they are next to the router.*
    *I hope this is the fix (although I dont know why it suddenly went to sh*t!) & I hope my hair pulling & trawling the forums can help someone else out.*
    Much Respect
    Lammo

  • Opening iTunes shows an error- The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem. ; Even after reinstalling iTunes doesn't start!

    When I start the iTunes program it comes up with this.. pls help!!
    "The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem."
    Even after reinstalling iTunes doesn't start!

    Repair your Apple Application Support.
    Control Panel > Programs n Features (Win7) or Add n Remove Programs(XP) > highlight AAS, click CHANGE then REPAIR.

  • Nano ver 6 doesn't show up even after reinstalling iTunes which had to be done because of problems with all Apple devices after trying to update iTunes via a message from Apple.

    Nano ver 5/6 doesn't show up in iTunes even after having to reinstall iTunes because of problems with trying to update iTunes after receiving message from Apple that an update was available.  Other Apple products are showing up.

    Hello Bill,
    Thank you for the details of the issue you are experiencing with your iPod nano.  I recommend reviewing this article for steps to take when your iPod is not recognized in iTunes:
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Current update failed to install properly. Downloaded current version and now I have the error message regarding MSVCR80.dll Itunes worked well to before the update. How can I correct this error?

    An update was downloaded and failed to install properly. When I tried to use the old Itunes, I get the message "The program can't start because MSVCR80.dll is missing from your computer". I then received the message "iTunes was not installed correctly. Please reinstall iTunes"I tried reinstalling with the same error message. I then uninstalled the old version, downloaded the new version and still received the same message. How do I solve this problem?

    Followed mspanner's instructions and was able to correct the problem. Thanks for the help.

  • I get error message trying to reinstall ITunes.  Error 7 (Windows Error 193), I get error message trying to reinstall ITunes.  Error 7 (Windows Error 193)

    I get error 7 (windows error 193) when trying to reinstall itunes on all my devices: computer, Iphone, Ipad Air.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Why am I still getting tuntime error message R6034 after reinstalling i tunes?

    I received a error code message R6034 while installing an I tunes update . can any one tell me how to resolve this issue? I have uninstalled and reinstalled I tunes and still get the same error code.

    Hi Lynd7,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • Cannot extract fonts error message even after fonts outlined

    will not allow me to attach screen shot from grab. Image not allowed is error message

    Grab saves files to tif format, you need a web format (jpg, png, gif) to post to these format. Rather than grab use preview app.
    preview application >> file >> take screen shot >> save as file type png
    Now the cannot extract fonts error, could be fixed possibly by an illustrator free update, don't know the verison you are on
    http://www.adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh
    Reset your illustrator your prefs.
    Does this happen to all files, or is this just a certain file. You may have a font in a symbol or opacity mask.
    Save a copy of the document, keep deleting items, unitl the error goes away. This will identify the problem item, of which we better help you by narrowing the variables down.
    When fo you get thgsi error, upon opening the file?

  • Error message asking to reinstall iTunes

    Every time I start iTunes on my computer, I get a message telling me the registry entries for burning CDs are missing and I should renstall iTunes, which obviously I have done several tiimes. Any ideas on how to make this go away?

    The first thing you need to do is go to your Computer Manufacturers website and download all the latest drivers for your CD Burner. It is most likely due to out of date drivers for your optical drives. This should fix it. If not, Try this:
    Do exactly as I post.
    Start Registry Editor (Regedt32.exe).(to do this, click on start, run and type that in)
    Locate the UpperFilters value under the following key in the registry:
    HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    On the Edit menu, click Delete, and then click OK.
    Locate the LowerFilters value under the same key in the registry:
    HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    On the Edit menu, click Delete, and then click OK.
    IF this Does not work, which it usually does, Try this:
    the thing to do to reclaim your optical drives is located in your registry here:
    HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}
    You'll want to have that open, and a mini-window of the following:
    START -> CONTROL PANEL -> SYSTEM -> Hardware (tab) -> DEVICE MANAGER -> Offending Drive (with yellow tag by it) Right-Mouse-Click and PROPERTIES -> Driver (tab) -> DRIVER DETAILS
    Notice that list. It references all the drivers that that particular drive is utilizing. There should be a single .DLL (dynamic link library) file and multiple .SYS files. It's the .SYS files we're focusing on, and they should be located in your C:\WINDOWS\System32\drivers\ folder stem. If you want to open a new window explorer, and go verify that each of those driver files still exists in that folder stem, you may.
    At this point, compare the Driver File Detail list with the Registry Tree Location you're sitting in, and look at the UpperFilterCheck and LowerFilterCheck key values. Your offending key value will NOT be on your Driver File Detail list!!! It might be as small as "PFC" or something else, but that value is referencing to a driver file that no longer exists. Delete that offending key value. Close the registry.
    Close the Driver File Details and Drive Properties windows. At this point, to finish this up, you need to Soft Uninstall (Right-mouse-click on the drive, and hit "Uninstall" ) the drive(s), let the Device Manager refresh... then hit ACTION -> Scan For Hardware Changes ...
    This should start a new Found New Hardware cycle, and.... Viola... your drives should be back to normal...

  • Itunes Not Syncing (even after reinstalling itunes)?

    So to keep a long story short, i have a ipod touch and recently its been impossible to sync it with itunes. I first updated both my itouch and itunes to the most recent type, that didnt do anything. Then, whenever i tried to use the run diagnostic feature on itunes, it just crashes instantly. So next, i tried reinstalling it, and every time i reinstall it, it syncs exactly once, then stops working again. I really dont know what the next step is to solving this, can someone pleeeeaaase help!

    Do you have any better luck with that if you update to iTunes 10.6.1.7?
    From the notes for the release:
    iTunes 10.6.1 provides a number of improvements, including:
    • Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view and syncing photos to devices.
    • Addresses an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
    • Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
    • Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.
    http://www.apple.com/itunes/download/

  • I have an error code 2324 after updating iTunes.. then the desktop icon disapeared and i can not sync my ipone or ipad...

    All i get is the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. the error code is 2324 .. I can not even uninstall itunes and start all over again.. i get the same error code.  the desktop icon has disapeared and i am at a complete loss...

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • HT5654 iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126). This message appears when attempting to open iTunes even after reinstall?

    iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126). This message appears when attempting to open iTunes even after reinstall?

    Repair Apple Application Support.
    START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

  • I recieved a message that MSVCR80.ddl was missing and iTunes would activate. After reinstalling iTunes, I'm receiving an "Error 7 (Windows error 126)" msg. What should I do?

    I recieved a message that MSVCR80.ddl was missing and iTunes would activate. After reinstalling iTunes, I'm receiving an "Error 7 (Windows error 126)" msg. What should I do?

    Hello, Jack. 
    You will find this article helpful in troubleshooting the error that you are receiving.
    iTunes for Windows: "Error 7" message when opening iTunes
    http://support.apple.com/kb/ts3074
    Regards,
    Jason H.

  • TS1424 Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404). I have researched this on Google and I have not read of any solution to this. Please advise.

    Him
    Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)."  I have researched this on Google and I have not read of any solution. Please advise.

    Here you go: http://support.apple.com/kb/HT1923
    There are three steps so make sure you follow all of them. They are:
    remove iTunes and everthing related to it
    verify everything is really removed
    reinstall iTunes.

Maybe you are looking for

  • Crystal report not showing all the table in SAP CRM

    Hi I am connecting crystal report 2008  using open sql connectivity (SAP table, cluster or Function ) with SAP CRM system. It is showing some of custom tables under "DD" but not all. Wanted to understand what setting make a new custom table (transpar

  • VT02N's Deadlines are not updating correctly in the background by BDC...

    Hi all, I have this Incoming IDOC that will perform a direct BDC on VT02N. This BDC will update VT02N deadlines : Shipment and Loadings dates... However, it comes out error "End Date Precede Start Date" When I manually put in, it works... And I have

  • Material ledger - BRAZIL

    Hi gurus, my brazilian client wants recalculate, at the end of every month, the stocks and sales using the real prices of the material. he wants revaluate sales and stocks using monthly purchasing price instead of standard price. Further more, he wan

  • Flash player just won't work..

    I am using a PC and operating on IE. I have downloaded the latest flashplayer a number of times, it says "installation complete" but then when I go to YouTube for example, it says I cannot watch videos due to not having flashplayer. I have been throu

  • SelectOneChoice SET

    Hi All, I have following code snippet. <af:selectOneChoice value="#{bindings.TableUsersView1CustId.inputValue}" label="#{bindings.TableUsersView1CustId.label}" binding="#{backing_create.selectOneChoice3}" required="false" valuePassThru="true" partial