. I have an iCloud error message on the screen.

The screen on my iPad is frozen. The hard reset does not reboot the iPad. I have an iCloud error message on the screen. That I can't get rid of.

Thank you. I had tried this before with no success. However, I tried it again. The problem is I don't know who to reboot without a keyboard. I can't get to the on screen key board with the screen locked up.
The error message I get is " iCloud Backup This iPad hasn't been backed up in 2 weeks. Backups happen when the iPad is plugged in, locked and connected to Wi-Fi" at the bottom of the message is an OK button.
Now with the iPad removed from the keyboard:the screen will stay lit for about 5 seconds and then go blank. Turning power off and on brings up a blank screen with the iCloud message and the slide to unlock. Touching the OK button causes a brief flutter of the button. Trying to slide the slide to unlock accomplishes nothing, since it won't slide.
The battery was at 49% when the problem occurred. I have since recharged the battery to 100%. I tried earlier to reboot with the iPad connected to AC.
Again, thank you for your suggestions.

Similar Messages

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

How to display error message on the screen

I am new to WD world and need all possible steps to resolve the following issue.
I need to display the error message on the screen if any required field is empty when user click on SAVE button.
I have set the attribute GO_MESSAGE_MANAGER and check the both box for PUBLIC and REFTO and set the associated type IF_WD_MESSAGE_MANAGER under COMPONENTCONTROLLER.
Under the method of COMPONENTCONTROLLER set the value WD_THIS-GV_NAV_FORBIDDEN = IV_NAV_FORBIDDEN. Which is type IMPORTING of associated type WDY_BOOLEAN.
GV_NAV_FORBIDDEN has been set to attribute WDY_BOOLEAN in the COMPONENTCONTROLLER.
Under the ACTION (on SAVE button) of my default view (VW_DEFAULT) I am doing the following.
IF lv_f_name IS INITIAL
    CALL FUNCTION 'BALW_BAPIRETURN_GET2'
      EXPORTING
        type   = 'E'
        cl     = 'HRRCF0002'
        number = '020'
      IMPORTING
        return = ls_return.
    lv_message = ls_return-message.
NEED TO PUT CODE TO PASS IT ON
ENDIF.

The thing I can not figure out is the input parameter of this call. My CONTEXT has a node1->node2->node3->f_name.
CALL METHOD lo_message_manager->report_attribute_error_message
EXPORTING
    message_text              = lv_message
    element                   = HOW WIILL YOU FIND THE VALUE OF THIS
    attribute_name            =
   params                    =
   msg_user_data             =
   is_permanent              = ABAP_FALSE
   scope_permanent_msg       = CO_MSG_SCOPE_CTXT_ELEMENT
   msg_index                 =
   cancel_navigation         =
   is_validation_independent = ABAP_FALSE     .
wd_comp_controller->set_navigation_forbidden( iv_nav_forbidden = abap_true ).

My iphone 4 has an error message on the screen that reads "iphone disabled connect to itunes" what do i do

My iPhone 4 has an error message on the screen that reads "iiPhone disabled connect to iTunes" I've tried connecting and can't get anywhere what do I do and what is the problem?

Your phone is disabled for some reason. Maybe you entered the wrong Passcode too many times. In any case you need to do just as the phone is instructing you to do. Start the latest version of atones on your computer and connect your phone. iTunes should guide you through the process of getting your phone working again. Here's a link to an Apple support page on this:
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

Detect error message on the screen

How do I detect error message on the windows 2000 screen? I need to detect any error message appearing on the screen
Thank you,
Jeff

You mean any kind of message generated by any kind of program, whether Java or not?

I have received an error message on the C6380 all in one saying "Printhead Problem"

Then says " remove all cartridges. Next lift grey latch and remove printhead, then reinstall printhead and cartridges."
I have done this, I have cleaned the printhead and contacts, put it back taken it out again and put it back again all to no avail.
I have turned it off at the mains, at the switch and anything else I can think of.
I cant get rid of the error message so I cant use the printer even as a scanner as it shows offline.
Cartridges have always been HP. Usage is minimal, intermittent but not great use. I tend to use it more for occasional scanning and copying. I cant even check the page count as I cant clear the error message.
What to do please?

If the HP warranty is over you can try soaking the Printhead.
Get a pan and put 1/2" of very hot (not boiling) water in the bottom.
Next remove all the ink cartridges, then remove the printhead assembly.
Gently put the printhead nozzles down in the water and let it soak for five minutes ONLY.
Remove the printhead from the water and gently dry the electrical contacts.
Put the printhead back in the printer and then reinstall the ink cartridges.
If the error is gone then run a few cleaning cycles from the front panel.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

I have an Icloud backup annopuncement on the screen and I can't get rid of it or use any of the buttons

I have a message on my Ipad that says there hasn't been a back up and when you puch ok to get rid of it, nothing happens, and you can't use any other buttons either?

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

Uploaded a video in my site but users are getting an error message on the screen.

Has anyone else experienced this type of problem? I created a video and uploaded to my website at: http://www.moulinrougeclothing.com I received feedback that my members were not able to view it. They saw on screen "The Adobe Flash Player or an HTML5 supported browser is required for video playback."
Can someone clarify what I need to do to get this working for them?
Thanks!

I don't see any Flash content on the link you provided.

I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB. lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive?

I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB. lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive? I opened the hard drive and from the column on the left of the menu I've selected "search for" and under that " all images" then "all documents" I've deleted a few files from each. Are documents and images that I have deleted from here also deleted from the folders on my desktop?

You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Delete any other mail in your Junk folders. Also, look through your Sent Mail to see if there is anything that can be deleted.
Other things you can do to gain space.
Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
This app will help you locate files that you can move/archive and/or delete from your system.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

Leslie Tanaka
Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
Let us go back over that Adobe document regarding troubleshooting damaged projects.
3. Delete the Application Preferences
Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
7. Test to see if individual media files are causing the problem.
That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
Please review and consider.
Thank you.
ATR

HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased

I purchased a magazine using the Zinio app which I'd recently downloaded on to a recently purchased iPad. I received an error message at the time (can't recall the details) but have since been invoiced for the $8.99. How can I get the Magazine I purchased?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch. I have done this numerous times, but today I got an error message saying the required file cannot be found. At the same time all of my photos on my iPod vanished. Can anyone help me?

I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch. I have done this numerous times, but today I got an error message saying the required file cannot be found. At the same time all of my photos on my iPod vanished. Can anyone help me?

Try deleting the photo cache from your computer and then re-try the photo sync - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

. I have an iCloud error message on the screen.

Similar Messages

Maybe you are looking for