I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
          Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading
          Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
3. Reset the PRAM.
4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
7. Repair permissions on the startup volume.
8. Turn off Bluetooth and test.
9. Reset the System Management Controller.
10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.
Select the Power Adapter tab and uncheck the boxes marked
          Wake for Wi-Fi network access
and
          Enable Power Nap...
if present. Then, if the computer is a MacBook, select the Battery tab and uncheck
          Enable Power Nap...
11. Reinstall OS X.

Similar Messages

  • I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red-keys out of order, and --Volume corrupt, can't be repaired.  I tried

    I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red…keys out of order, and ……Volume corrupt, can't be repaired.
    I tried to do a system install, but message said…disk can't be changed. Will a complete erase and install fix this ?
    Everything is backed-up.

    There's hardware and software.
    Your drive could physically be in good condition but something has caused the file structure to be messed up (it just happens sometimes).  The directory that keep track of files is corrupt.  Disk Utility can help determine if that is the issue.  In some cases it can repair the problem but it cannot do it to a drive that is being used to boot the system while you are doing that.  You have to boot from another drive.  Some things DU cannot repair and you need to try a stronger utility such as Diskwarrior.
    A failing hard drive (one with mechanical issues) can be a cause of file structure issues but this is by no means always the case.  Apart from looking at the SMART diagnosis feature of Disk Utility (and smart isn't totally reliable) there often isn't a way to tell if a drive is failing until it suddenly happens, which is why you need to maintain backups.
    In your situation it does sound serious and not just minor directory corruption.  You can try erasing (formatting) the drive,  You may need to do this if it is really corrupt, in which case there could be underlying physical issues.  I use old technology but if you have the patience you can try erasing the drive with the security option of writing zeros once (don't do more unless you are going on a 3 week vacation).  This makes the drive not simply assume everything is okay by forcing it try every part of the drive by writing data.  If something is gong wrong you may find it marks a lot of bad sectors, or flat out refuses to format.  Then you know you need a new drive.

  • I have an iMac mid-2010 running Snow Leopard. Is it possible to install Mavericks and Windows 8 on separate partitions while keeping Snow Leopard?

    I have an iMac mid-2010 running Snow Leopard 10.6.8. Is it possible to install Mavericks and Windows 8 on separate partitions while keeping Snow Leopard? If so, can you describe the steps?

    That should not be a problem as long as there is enough room on each partition for each OS.
    You would:
    Use Disk Utility to partition your HD
    Download the Mavericks installer and install it on one of the open partitions (when you run the installer from your 10.6.8 partition, it will ask you where you want to put Mavericks, and you will specify one of the open partitions).
    Use Boot Camp to install Windows on another of the open partitions. Mac Basics: Using Windows on your Mac via Boot Camp

  • I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • TS1363 i have a new iphone 5 and although I had a little trouble downloading all my apps and music, i did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can  Anyone help

    I have a new iphone 5 and although I had a little trouble downloading all my apps and music, I did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can  Anyone help?

    Hey leafxxx,
    Thanks for the question, and welcome to Apple Support Communities.
    The following resource provides troubleshooting steps if your iPhone is not displayed in iTunes when connected:
    Apple - Support - iPhone - iTunes Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/itunes/
    For more detailed instructions, see this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Enjoy your new iPhone 5!
    Matt M.

  • I have a mac ox 10.5.8 and I'm trying to download a downloader that converts video files into mp3 but none of them wont open. Can anyone help?

    I have a mac ox 10.5.8 and I'm trying to download a downloader that converts video files into mp3 but none of them wont open. Can anyone help?

    http://software-download.name/video-to-mp3-converter-osx/
    http://www.macworld.com/article/1161412/how_to_convert_audio_and_video_files_for _free.html
    http://www.applemacvideo.com/howtoconvert/flvmac/flv-to-mp3-mac.html
    http://www.iskysoft.com/convert-audio/convert-mpeg1-to-mp3-mac.html
    Not sure if any are PPC, oR 10.5.8 compliant, still, if you give a link to one you're trying, it may be helpful.

  • HT1349 My home button isn't working. It works to put it in dfu mode but not to return to home page where my apps are. Can anyone help please?

    My home button isn't working. It works to put it in dfu mode but not to return to home page where my apps are. Can anyone help please?

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • I have FCPX 10.0.0 I'm trying to install updates. It's not allowing me to do this. The App Store says I did not buy the FCPX from the App store. Which I did. Can anyone help me figure out how to update my FCPX?

    I have FCPX 10.0.0 I'm trying to install updates. It's not allowing me to do this. The App Store says I did not buy the FCPX from the App store. Which I did. Can anyone help me figure out how to update my FCPX?

    Hi , a similar thing happened to me with another piece of software .. it was then that I realized I have two accounts .. I have no recollection of setting up two but it seems I did somewhere along the line.. I have jimkells and the second is [email protected] .. so when I logged in as the other acc there it was and I was able to update .. could it be FCPX was bought on another user account ??
    Jim

  • When I try to drag titles or special effect into my clip in imovie it doesn't work can anyone help me?

    When I try to drag titles or special effect into my clip in imovie it doesn't work can anyone help me?

    Assuming you have (1) signed out, then (2) waited 30 minutes and it didn't work you will need to contact iTunes again.

  • TS3297 Hi, I've setup my new mini ipad today, restored a backup from icloud and all is fine.  However, when I try to download my music, they almost completely download then an error message pops up saying "unable to download songs" - can anyone help pleas

    Hi, I've setup my new mini ipad today, restored a backup from icloud and all is fine.  However, when I try to download my music, they almost completely download then an error message pops up saying "unable to download songs" - can anyone help please?

    So it appears iCloud/iTunes Match isn't the issue - the error message would seem to be complaining about where the music is being downloaded to. So with this in mind:
    In iTunes select Preferences and select Advanced. The iTunes media folder should be set to /Users/<your account>/Music/iTunes/iTunes Music. <your account> would be whatever your user account is. If you see something else there I'd guessing it is a folder you don't have permission to write to.

  • I have tried all sugestions for how to charge my ipad 2 that no longer charges, and nothing seems to work, can anyone offer any new advise?

    I have tried all sugestions for how to charge my ipad 2 that no longer charges, and nothing seems to work, can anyone offer any new advise?

    While both the iPhone and the iPad use an Apple dock cable for charging, the iPad wants a 1100 mA charger, and the iPhone charger's a 500 mA charger. USB ports on newer Apple computers can switch into 1100 mA mode, but your average computer is going to put out no more than 500 mA and, possibly, quite less (for example, an un-powered USB hub will only put out 100 mA or so, and an iPad won't charge off that). The iPad will say "not charging" if it is trickle-charging (receiving less than 1000 mA of power).
    If the problem persists when using the 1100 mA iPad charger, you need to take it to an Apple store and have it serviced or replaced. Bring the iPad charger that you received with the iPad as it may be that the charger is defective and not putting out 1100 mA.
    If the problem is that it charges slow because it's being connected to iPhone chargers or PCs or older Macs, then it's not a problem with the iPad. It's charging, it just takes a long time because you are using an under-powered charger.

  • HT201412 I was trying to update my iphone but it gives the following error(We're sorry, we are unable to continue with your activation at this time) Now my phone is not work working can anyone help?

    I was trying to update operating system of my iphone but it gives the following error(We're sorry, we are unable to continue with your activation at this time) Now my phone is not work working can anyone help?

    Is your iphone hacked/jailbroken?

  • Hi, i cannot publish my iWeb site with  a non mac domaine name...can anyone help please?

    hi, i cannot publish my iWeb site with  a non mac domaine name...can anyone help please?

    Hi, I have a site developed by myself usinf iWeb and as iWeb are no longer hosting teh sites in 2012 i have found another domaine. It is with Go Daddy and the domaine / name is live. I have tried to publish site using fttp but keeps coming up wih a common error message saying the info i have input is incorrect. I have tread this may be an issue if host is a windows based host???
    appreciete your help

  • When i connect i5 to itunes .. i dont get "delete" option for songs upon right click .. can anyone help me with this plz?

    when i connect i5 to itunes .. i dont get "delete" option for songs upon right click .. can anyone help me with this plz?

    Yes, annoying. A couple of options:
    While it's playing the current A song, click on the H song to select it (but not double click to play it), when iTunes jumps to the second A song, press the down key and iTunes will remember that you had that H song selected and will move the selection to the second H song while the second A song is still playing. So, still jumps around, but easy to get back to where you were.
    Create a new playlist for your music, right click on it, select "New Window" and you can browse your music in a second list while the first window continues to play music. But if you then start playing music in that second window, you have to go back to the first window if you want to start browsing again. Not great if you're navigating around to play the next song.
    Play music from iTunes DJ, then as you're browsing around your library, you can add things to play next in DJ, and go back. You can combine this with previous suggestion, to keep DJ open in one window while you browser in the other window.
    None of these are great, but maybe one of these works better than your current workflow.

  • I carnt hear my message tone,the sounds it makes when the phone locks and opens.Also i am unable to hear my music playing from my phone but my alarm and ringtone are working.Can anyone help

    i carnt hear my message tone,the sound it makes when the phone locks and opens,also i am unable to hear music when playing from my phone but my ringtone and alarm tone work.Ive made sure the silent button is not on,and the volume button on the side of the phone is just showing it blank instead of it going up and down.To try and fix this i have reset my settings and restored my phone,but now its just skipping the music i have purchased from itunes when in a docking station which is now another problem i have as well.Can anyone help????

    Hello dbrookes,
    Thank you for using Apple Support Communities!
    It sounds like even though the Mute switch is not on, sounds are not making the, well, sound they should, and the volume buttons make a blank volume indicator appear on the screen that does not show the volume level.
    I wanted to recommend a couple of things.
    First, I would reset the phone:
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
              http://support.apple.com/kb/ht1430
    If that does not resolve the issue, then you may want to try backing up to iTunes, and restoring the iPhone again but this time do not restore the backup and set it up as new to see if the issue persists without the previous configuration.
    Just incase you need it, this article will help with that:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Cheers,
    Sterling

Maybe you are looking for

  • Problems witch channels to the FICON SAN switches

    We have some problems witch channels to the  FICON SAN switches: channel 56 on Mainframe1 to switch 5B5 (FDBELF5C1_VSAN500_DISK) and channel 28 (on Mainframe1) to switch 5B7 (FDBELF5C1_VSAN510_TAPE). Forr Mainframe2 the channels are 35 to 5B5 and 37

  • Insert or Update method - removed from Web Services v2.0?

    Was the "insert or update" method on standard objects taken out of Web Services v2.0 for a reason? Is there an equivalent of this functionality in Web Services v2.0? Thanks, -Kevin

  • Java EXE - Passing Attributes

    Hi, I have a java application that performs many functions. I have compiled this application into an exe file. I would like to automate things. E.g. using Windows Scheduler to run the app at 2am - execute function1, 4am - execute funtion2. etc.. Is i

  • RMAN Backup in ORacle Apps R12

    Hi All, We have oracle Apps 12.0.4 installed.Ours is a small application and we are in implementation stage. As of now, we are taking regular backup of db (datafiles) using RMAN by scheduled cron jobs. I am looking for options to schedule the backups

  • Can I import directly to snippets?

    I have FrameMaker documents with a lot of reference material (like option name/description pairs) that I want to use as snippets in my RoboHelp project. Can I configure the import to create this material as individual snippets (new topic breaks based