I have an iMac OS X 10.6.8 and have problems with the backup Disk for Time Machine disconnecting itself with the message that I ejected it improperly.. It ejected itself - why?

I have an iMac OS X 10.6.8 and have problems with the backup drive to Time Machine ejecting itself and so does not automatically backup the way it is meant to do. It is connected with an USB cable to my iMac. What could cause this - malfuntioning drive?

The "iLife" apps are not part of any Mac operating system install and are a separate purchase.
Once you get past 10.6.6 you can purchase and download iPhoto, GarageBand and iMovie. iWeb and iDVD have been discontinued.
Snow Leopard 10.6.6 and higher include the App Store application which is what you use to purchase Lion.

Similar Messages

I have used my 2TB TC for wifi and as principal backup disk for Time Machine for a few years. I would now like to begin using another external HD for Time Machine. My question is.... Can I repurpose the Time Capsule to use as storage for libraries?

For example - I plan to use 2TB TC to house my iTunes Media Library and iPhoto Libraries - permitting access from my network.

I believe based on your notes that I need to forget about moving the iPhoto library.... even though I have found in Apple support:
http://help.apple.com/iphoto/mac/9.5/#pht6d607c42
That document says.. and I quote.
You can move your entire iPhoto library to a different computer, a hard disk, or another location on your computer.
Note that none of those locations are network.
A different computer is not network.. a hard disk is a location on the same computer as is computer location.. they are saying the same thing.
Here is what apple says about networks.. which I referenced above.. and Bob referred to.
It's recommended that you store your iPhoto library on a locally mounted hard drive. Storing your iPhoto library on a network share can lead to poor performance, data corruption, or data loss.
These are not inconsistent.. you can move the library.. what you cannot do is use it from a network location.. it must be locally mounted.
And do you think the new Photos will change any of this (though presently I am still on 10.9.5)
This is what we don't know yet.. it does look like photos will be more network aware.. do you want to be on the bleeding edge and discover it fails??
You can use any drive you like locally for TM backups.. however if you plug that drive into the TC and make it a network drive then it will become super slow.. since the TC only has USB2 port. You also cannot use TM backups on a local drive and then move it to the network.. TM backs up differently in network cf local drives.
You must partition the drive. If you want to use the one and same drive for both backups and files, partition it before hand. if you mix the backups with actual data files on the same drive.. you have no backups if the drive fails.. You must have all files on at least 2 drives. For iphoto let me suggest more than 2.. since photos are irreplaceable and it is so easy for things to go wrong.. including fire, flood and theft. Make up a USB drive and park it with relatives.

I have a iMac(2013 24inch) (10.8.3) and have been told by Mpix to calibrate my monitor using ColorMunki. Should I purchase "Photo" or "Display" HELP?

I have a iMac (2013- 24inch) 10.8.3 and have been told by Mpix to calibrate my monitor. Should I purchase Colormunki Photo or colormunki display? I am new to this calibration thing. I would appreciate any experienced advice about which item to purchase and why. Thanks

The Color Munki Display is limited to calibrating displays. The Color Munki Photo can be used to calibrate displays, projectors, and printers.
The CM Display is less expensive and meets your needs. If you are using an outside printing service, or are printing on standard papers using popular printers (e.g.: Epson Hot Press on an Epson 3880), there is no advantage, IME, to making your own printing profiles. I have long used a CM Photo and have found it an excellent value.
The MPix recommendation is spot-on. You might find some good tips in this post as well.

I have an iMac running system 10.7.5 and have AI CS 5 and CS 6 installed. I am thinking to upgrade to system 10.8, but I wonder if I won't be able to run AI CS 5 anymore?

I have an iMac running system 10.7.5 and have AI CS 5 and CS 6 installed. I am thinking to upgrade to system 10.8, but I wonder if I won't be able to run AI CS 5 anymore?
I like CS 5 a lot better than CS 6.

CS5 runs on 10.8
http://blogs.adobe.com/vikrant/2012/07/adobe-creative-suite-and-mountain-lion-mac-os-x-10- 8/

Hi, I have an iMac which I just booted up and have a white screen with a blue folder with a question mark blinking on and off. Any help would be appreciated. Tommy

Hi, I have an iMac which I just booted up and have a white screen with a blue folder with a question mark blinking on and off. Any help would be appreciated. Tommy

That means your iMac could not find a system to use for startup. That may mean the internal hard drive has become faulty, or the hard drive mechanism is fine, but the startup volume ("Macintosh HD" unless you renamed it) may have some type of data corruption that makes it unbootable.
First, you should try resetting PRAM
http://support.apple.com/kb/HT1379
and if that does not help, use this procedure to reset SMC (power management). If your iMac is from 2008, this is the procedure for Intel (not PowerPC) Macs.
http://support.apple.com/kb/HT3964
(This forum category is for "iMac (PPC)," so if this iMac is older (with a PowerPC processor), please post back.)
Disconnect all peripheral devices. When you connect it back to power, if you have been using a power strip of some type, try connecting it directly to a wall outlet, by itself (at least initially). Start up with nothing but the power cord connected, then add only standard mouse and keyboard. If it works, run it that way for a while.
If PRAM and SMC reset have no effect, you should insert your Mac OS X installation disc (for the currently installed system) in the optical drive, and restart with the C key held down. This should get you to the Installer screen, where you can run Disk Utility from the Utilities menu.
In Disk Utility, does the internal hard drive appear in the sidebar? If so, select Macintosh HD in the sidebar and go to the First Aid tab. Use Repair Disk. If an error is found, note if Disk Utility was able to fix it or not.
You can then quit Disk Utility and attempt to restart normally.

My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.

have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya!

Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I

Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?

Hi bodegakc,
If you have the serial number then please use the below mentioned link to download the product you are looking for .
CS5.5
Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
You can also use creative cloud cleaner tool before installing.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks
Nikhil Gupta

HT3275 Has anyone come across the red "i" message saying "The backup disk image "/Volumes/Chris...(the last bit being) iMac.sparsebundle" is already in use? This has prevented my time machine from backing up from this morning (5th Dec 2012).

Has anyone come across the red "i" message saying "The backup disk image "/Volumes/Chris...(the last bit being) iMac.sparsebundle" is already in use."?
As of yesterday (4th Dec 2012) everything was fine, no trouble or problems at all. Wake up this morning, turn on the computer and when it came time to backup itself, the message occurred above and this has prevented my time machine from backing up from this morning (5th Dec 2012) ever since then.
Everything on my computer is up-to-date but this problem still persists displaying this message practically every hour, on the hour and nothing is getting backedup!
If you know what is going on and more importantly, how to fix this, I would be indebted to you for sharing your knowledge with me on this subject.
Thank you.

Welcome to the Apple Support Communities
See > http://pondini.org/TM/C12.html

HT1578 I have found that I can't access the contents of the encrypted disk in time machine backups. The Finder window displays a grayed-out icon representing the disk. Can this be remedied?

I have found that I can't access the contents of the encrypted disk in time machine backups. The Finder window displays a grayed-out icon representing the disk. Can this be remedied?

Time Machine error: Apple Support Communities
OSStatus 5 when trying to use Lion...: Apple Support Communities

Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

Set up each Mac for Time Machine backups in the normal way. Time Machine will keep each backup separate on the Time Capsule, so users will only be able to see the backups of their own Mac.
Yes....there are convoluted workarounds that might allow one user to see the backups of another.....IF...they know the administrator password of the "other" Mac.
As far as Internet sharing, all users will have access to the Internet if they have a wired or wireless connection. If a Mac connects using wireless, it is possible to limit the time that they are allowed to connect to the network.
For example, you might limit the ability to connect to the wireless from say each Weekday from 8 AM to 6 PM.
With a wired Ethernet connection, you cannot limit access times to the Internet.

HT4500 The Genius Bar wiped my hard drive (10.7.2) and I have since been unable to restored the backup from my Time Machine

I followed these steps from this article;
In Finder, press Command-Shift-U.
Double-click Migration Assistant.
Click "Continue" and enter an administrator name and password when prompted.
Select the "From a Time Machine backup or other disk" option, then click "Continue".
Select your Time Machine backup disk or Time Capsule (enter the user name and or password if prompted), then click "Continue".
Having selected the correct disk nothing happened, other than the word "connecting" appeared. After some time this also appeared. "The backup disk image “/Volumes/Ross Backup Data/Ross’s iMac.sparsebundle” could not be accessed (error -1)". I tried both with the Time achine connected wirelessly and via Ethernet, with the same result.
Select the Time Machine backup you would like to restore (such the most current one you just made), then click "Continue".
Select Items to Migrate, then click "Continue". Note: The "Continue" button will be dimmed until the "Calculating…" stage is complete.
Any ideas please?

How big is your Time Machine image? If it's really big (eg, several hundred gigs), it can take a lot of time to calculate the time needed to restore it onto your Mac. This said, I'm still on SL, so maybe you have to reinstall Lion from the restore partition first, then migrate your personal stuff from the Time Machine image.
Additionally, you'd be better served if you posted this thread in the Lion part of the forum...

Have backup disk, but Time Machine is not recognizing it...

I have tried 3 different external hard drives, all of which have come up in Finder and I am able to explore them, but when I ask to set up Time Machine, it has no options of any backup disks for me to select? Help! Right now I have Western Digital 500 GB drive connected.

Using Disk Utility. First, make sure there is no data on the drive you want to keep. Everything that's on the drive already will be destroyed in the conversion process.
Open Disk Utility (from the Applications > Utilities folder) and select the backup disk from the left-hand pane. Make sure you select the correct disk, otherwise you may lose valuable data! In the main section of the window, select 'Erase' and make sure that "Mac OS Extended (Journaled)' is selected. Change the name if you want, then click 'Erase...'.
When this is complete, your freshly formatted disk should appear in the Time Machine preferences.

Suddenly, I am unable to add photos to my project in Imovie 11. I have an IMac Snow Leopard 10.6.8 and have made several movies where this worked fine but for some reason, it has quit. Everything seems to be working fine except that?

I'm an oldtimer and have had this Mac for less than 2 yrs and have LOTS to learn - but I've climbed the curve a little. !'ve made several movies and published to YouTube and burned to disc using IDVD with reasonably good results. Each time I have added stills to my movies it has worked fine - but tonight, I'm suddenly unable to add them. I click "Photos" - select my photo - left click the photo and drag into the project while holding the click. Have the green "+" and the green highlight and even get the green vertical bar in the project but when I release the click, the photo simply disappears! One "clue" here may be this: I was able to add one still to this project and the only diff between it and the other still thumbnails now is that there is a "green check mark" on the thumbnail of the one successfully added. Any suggestions? (I do have the "advanced tools" option selected in IMovie Preferences.)
Thank you so much for any help at all.
Sam

Hi
My first thoughts are
• iMovie ill behaving - Trash the iMovie pref file - use to set things right
• in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
Yours Bengt W

First Imac in the post. What size hard disk for Time Machine

I have a 500GB hard disk in my new imac (Which I dont have yet)
What size drive should I get to backup my system.

Peggy's answer is essentially correct. OTOH, if after moving into your new computer you are using only 40GB of that huge drive, it would silly to get a 1GB drive, at least until you've found a way to fill up more of the drive....and you will eventually. So to amend Peggy's answer, look at how much drive space you are currently using. If you own a digital camera figure you could easily fill 1GB a year per child. Music and/or Video? Estimate how much you've added in the last year and use that as a rough bench mark. Add another 5GB and add all that together to see how much of your drive you'll have filled by this time next year. Use that to gauge how big your external TM drive should be, based on the 2 to 3 times bigger figure.

Firefox asks me to update to 5.0, but I have rolled back to 4 because Google Toolbar and McAffee, among others are not updated for 5.0. When will the add-ons be updated?

The update for 5.0 came so quickly, that a very large number of the add-ons and extensions I use to keep it safe and operate the way I am used to are not working, the MOST important of these being Google Toolbar and McAfee site advisor. I am already using Chrome for work due to the known issues FireFox has with the Google Toolbar in 4.0, and although I am a HUGE fan of Firefox, this latest update that seems rushed just to meet a deadline set may be the straw the broke the Firefox's back!! Let me know what I can expect going forward

'''The Google Toolbar is no longer supported by Google in Firefox 5 and up''', you may be able to get what you want from it for a limited time, the directions to install the Google Toolbar were posted before Google actually announced dropping support.
*Enable Google Toolbar in Firefox 5<br>http://googlesystem.blogspot.com/2011/06/enable-google-toolbar-in-firefox-5.html
*the-edmeister posted a brief evaluation of the situation<br>https://support.mozilla.com/en-US/questions/841736
Since you are or were working on Google Chrome, you already have a good idea of how you can use your browser without the Google Toolbar.
In any case you can find several alternative solutions, and you can start working on them now, see
* "'''Using Google Toolbar features without toolbars'''" <br>http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars

I have an iMac OS X 10.6.8 and have problems with the backup Disk for Time Machine disconnecting itself with the message that I ejected it improperly.. It ejected itself - why?

Similar Messages

Maybe you are looking for