I have an iMac running snow leopard. I have trouble with my internal speakers, I cannot adjust the volume without having an earphone plugged into the jack.

The volume only works when I have earphones plugged into the jack, otherwise when I try to adjust the volume it has a circle with a cross. Ive tried restarting it with and without the headphones plugged in. However it does make that mac sound when turning on the machine before the apple logo comes on and takes me to the desktop screen. Is there anything I can do to fix this??

I'm having a very similar problem.
I've got a 2010 iMac that I've got hooked up to my Pioneer Elite via HDMI cable using the Moshi adapter.
It's been working great for months, but today the audio began dropping out -- a fraction of a second, every six seconds or so.
I installed the latest Snow Leopard update today. Does anyone think there might be a connection?
thx!

Similar Messages

I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy. Can any one help

I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy and it is telling me so. Can any one help please?

Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
In fact there's a new one for HP at the top of the list just now.
You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc.

Rephrase..Have 2009 iMac running snow leopard should I upgrade to Mavericks

Rephrase..Have 2009 iMac running snow leopard should I upgrade to Mavericks

If your machine meets the specs, the latest is Yosemite; make sure you check all the requirements as your machine falls right at the back end of being supported - meaning that it will not run at its maximum speed due to an older processor. You'd also need an absolute minimum opf 4 GB RAM - 8 would be much better.

I have a imac running snow leopard 10.6.8 and have adobe cs5. Is it safe to update to mountain lion 10.8.2 and keep adobe CS5 running properly?

I have a imac running snow leopard 10.6.8 and have adobe cs5. Is it safe to update to mountain lion 10.8.2 and keep adobe CS5 running properly?

You should not. But it never hurts to have a backup because bad things can happen.

I have an IMAP mailbox that seems to only show mail 7 days old on my iMac running Snow Leopard.However, all old emails that I have not deleted are showing up on my macbook pro running the next OS (Lion?). How do I get all my old emails back on my iMac?

I have an IMAP mailbox that seems to only show mail 7 days on my iMac running Snow Leopard. However, on my MacBook Pro I can see all old mail that I have not deleted. It is running the next operating system (Lion?). Does anyone know how I can get all my old mail back on my iMac. It is my primary computer and I need some of those old messages. I have tried to rebuild the mailbox but it has not done anything.

I have tried to rebuild the mailbox to no avail. The mailbox behavior says: Drafts (not checked) store draft messages on the server, Notes (checked) show not in Inbox, Sent (checked) Store sent messages on the server Delete sent messages when (option never selected), Junt (not checked) store junk messages on the server Delete junk messages when (option never selected), Trash (checked) moves deleted messages to the Trash mailbox and (checked) store deleted messages on the server Permanently erase deleted messages when (one month old option selected).
I have not set up any rules that I know of other than a signature, in the very least I have not changed any.

My early (white plastic) 2006 imac freezes. I'm running Snow Leopard and have formatted and reinstalled the software 3 or 4 times.   Model Name:     iMac   Model Identifier:     iMac4,1   Processor Name:     Intel Core Duo   Processor Speed:     2 GHz

My early (white plastic) 2006 imac freezes. I'm running Snow Leopard and have formatted and reinstalled the software 3 or 4 times.   Model Name:          iMac
Model Identifier:          iMac4,1
Processor Name:          Intel Core Duo
Processor Speed:          2 GHz
Until I installed the SMC FanControl application my screen would "break up" into strange patterns and then would eventually freeze. Please help.

If you are trying to upgrade using a gray-faced OS X disk from another system, that won't work, as those disks are locked to the system types they are delivered with. You'll need to drop the $29 on a retail copy of Snow Leopard, which is available from the Apple online store. Note Snow Leopard requires 1GB minimum, and you may want at least 2GB for better performance.

Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8. After updates no wireless capability for ipad or laptop, imac connects fine but nothing else.No widgets work.

Ok, tried message boards everywhere to try and figure this out before having to post a question. Have a 21.5" iMac running Snow Leopard 10.6.8. After updates no wireless capability for ipad or laptop, imac connects fine but nothing else. No dashboard widgets work, Skype won't work. What goes?

Your post is pretty lengthy and I have to admit I didn't read it all. Please try restarting in Safe Mode, if that doesn't work please do both a SMC and PRAM reset. These may take 2-3 attempts.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Have a MacBook Pro running Lion and an IMac running Snow Leopard. Want to Back up both images and restore on opposite machine. Essentially swapping images between hard drives. Is this possible and any "gotcha's" to look for? Thanks

Have a MacBook Pro running Lion (10.7.9) and an IMac running Snow Leopard (10.6.8). Want to Back up both images and restore on opposite machines. Essentially swapping images between hard drives. Is this possible and any "gotcha's" to look for? Thanks

If the MBP came with Lion, it most likely won't boot with SL. Easiest thing to do is create a bootable backup/clone of each to an ext HD, partitioned to hold each on a separate volume, ensure that the original machines can boot with their respective clones, and finally, try booting the other machine with the other clone. Images are useless since you can't boot with them to test them out.

Will my Adobe Creative Suite CS3 run on Mavericks? I have a 2007-08 model iMac, running Snow Leopard.

Will my Adobe Creative Suite CS3 run on Mavericks?
I have a 2007-08 model iMac, running Snow Leopard.
Thanks!

Partition your hard drive or add an external hard drive and install Mavericks into it and "dual-boot" to determine which flavor of OS X you are running. DO NOT install Mavericks over your Snow Leopard environment as Mavericks will destroy it!
You can then experiment using Mavericks all you want with the ability to boot back into Snow Leopard as needed.

My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?

My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?

I have tried resetting PRAM and all other items listed in the Apple support site. This happened after an update to iTunes was added. Also this is happening to other people. Please help.

I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

IS THE SITUATION HOPELESS
I used Target mode to transfer files to a new i7 iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
Please tell me how to get this disc to eject !

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive. Can't get it to run Hardware Test. Disk Utility says disk OK - files are there. What can I do?

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
 Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6

Problem installing officejet pro 6830 software on my iMac running Snow Leopard

Greetings, I have a problem installing officejet pro 6830 software on my iMac running Snow Leopard. When I insert the HP software disc onto my iMac, and go to the HP website, it says:
"403" Ooops! Request forbidden...
Any possible solutions to this? Thanks for any feedback...

Hi @RNOjetnow ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue with needing the drivers for the 10.6 Snow Leopard OS. You should be able to install the Apple Drivers just by connecting the USB cable.
Here is a document that might help.
Hope this helps you install the drivers.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I am running Snow Leopard 10.6.8 with bootcamp 3.3 on my Imac 2011. I need to updgrade to mountain lion. If I first upgrade to mountain lion, how do I go about upgrading from bootcamp 3.3 to latest bootcamp for mountain lion?

I am running Snow Leopard 10.6.8 with bootcamp 3.3 on my Imac 2011. I need to updgrade to mountain lion. If I first upgrade to mountain lion, how do I go about upgrading from bootcamp 3.3 to latest bootcamp for mountain lion?
I have seen a lot of discussions upgrading from Boot Camp 4 to 5 but no answers upgrading from boot camp 3.3 to 5. My worry is that if I upgrade from snow leopard to mountain lion, that my bootcamp partition will no longer be able to boot up. There seem to be a lot of threads suggesting problems that are possible. Has anyone gone through this upgrade with success?

Before doing any installation restart OSX from your 10.6 Snow Leopard DVD and use Disk Utility to Both Repair The Disk and Repair the Permissions of your Macintosh HD.
Next remove your Snow Leopard DVD and restart your iMac into OSX.
Update to the latest version of OS X Snow Leopard by clicking the Apple icon and choose Software Update to install Snow Leopard v10.6.8, the latest version.
Use Time Machine to make a Full Backup of your Macintosh HD.
Shut down and restart into Windows by holding the Option key at the chime and selecting Windows.
Now use Windows Backup to make a Full Image Backup of your Windows Installation to a removable drive.
Shut Down and Boot back into OSX.
Open the Mac App Store from your Dock to buy and download Mountain Lion. Then follow the onscreen instructions to install it.
Upgrading your OSX to 10.8 should not effect the Windows Partition at all since you are only upgrading the Mac side. You should not have to run the Boot Camp Assitant 5 Utility in OSX at all.
Your Boot Camp 3.3 Windows Support Drivers et. al only effect your Windows installation and should continue to run fine after upgrading.
Which version of Windows do you already have installed on the existing Boot Camp Partition?
Is it 32 bit or 64 bit?

TS4185 Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there?

Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there? When called by the Imac (newest), the "accept" or "reject" radio button appears for me to click and connect. On my wife's Ipad the two radio buttons always appear when a call actiivates Facetime and comes on?
There is nothing I can find in "Preferences" in Facetime to turn that on or off. I suspect it has to do with having a more current operating system; that the "controls" are in the operating system? [I'm guessing] It's frustrating getting Facebook calls from several friends on Ipads! Any ideas...VFP

I suspect it has to do with not having a more current operating system
Exactly, what Apple is doing is leveraging new features only on newer OS X versions to force you to upgrade OS X to 10.7 or later.
What they don't tell you is 10.7 or later will NOT run your PowerPC based software, some of it you can't get Intel versions like for perfectly working printers, scanners and games etc. So it can be a very expensive OS X upgrade to 10.7 or later with third party software.
http://roaringapps.com/apps:table
Also they don't tell you is the risk in bricking your machine if the update goes badly, so you have to have AppleCare in case that occurs so it's on them to fix it. Else your paying money to replace the logicboard or buying a new machine prematurely.
A four year old machine can't have AppleCare, it's only good for 3 years from date of purchase new.
Your machine came with a boot hard drive, it's usually got about 4-5 years of life on it, then it needs to be replaced.
Also they don't tell you the newer OS X version has more abilities and features that causes your machine to slow down in performance, especially on older machines.
Also they implement new, idotic and extremely fustrating new user interface features in a arbitrary "you take it or leave it" manner with little or no fall back method.
So upgrading OS X is a gamble on older machines that otherwise would likely work perfectly fine for the next 5 years if one didn't need to have to mess with it.
Since Snow Leopard has slightly over 25% OS X version market share, your still good for security updates etc for the next few years if you just want to stay where your at and be happy.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
The Lions are, well, not so welcome due to Scott Forstall retard UI issues, OS X Mavericks 10.9 is likely going to fix things a bit better.
But basically what is occuring is Apple is trying to force a faster hardware upgrade cycle with the more expensive products by leveraging features on the smaller devices that expire sooner.
Apple is a hardware company that leverages whatever it can to get you to buy more hardware, it's why they are as rich as they are.

I have an iMac running snow leopard. I have trouble with my internal speakers, I cannot adjust the volume without having an earphone plugged into the jack.

Similar Messages

Maybe you are looking for