I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .
i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .
Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.
Similar Messages
-
I have been trying to open itunes that has already been installed. But, the thing is it never opens and when i do right click and trouble shoot also, it doesnt open. I dont whats wrong with itunes and my comp is 64 bit windows 7. Can somebody please help
no its 64 bit version of itunes. Can you please help me. I am not able to sync my iphone.
-
Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?
If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2. How can I fix this? I have uninstalled and reinstalled it several times and it still doesn't work.
What computer do you have? is it 32 or 64 bit operating system?
-
My Fantom backup drive is failing and I have to send it in for warranty repair. Before I do that I want to copy the time machine contents to a new drive and then use it for the backup, continuing on as if nothing had gone wrong with the first drive. Can I do this? Is it as simple as duplicating the first drive and replacing it with the second? New drive arrives Tuesday PM and both drives have dual firewire 800 ports.
I have used the Disk Utility to verify the contents of the backup drive so I don't think I have any corrupt files. The drive just takes a minute or so to spin up to speed. If I turn it off and then back on, it beeps at me for a few seconds and then starts it's slow process of trying to spin. I think it's a power problem not a data problem. I have my fingers crossed that it holds on until Tuesday PM when the new drive arrives. I'm thinking that my two options are to duplicate the bad drive or partition the new drive and put the old backups on one partition and start afresh on the second partition. Any input?
And thanks to both of you for the valuable information so far! -
Will a 10.6.8 version of Mac OS be compatible for Airplay with Mountain Lion?
will a 10.6.8 version of Mac OS be compatible for Airplay with Mountain Lion?
Not from Apple. However, check out http://airparrot.com as they make a product to enable the function on 10.6.8 and Lion.
-
i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
now the things i want to use with my mac that i thought would be even simpler...are not even useable...
helpThat camera shoots H.264 in an .avi wrapper.
You will have to transfer the files via the Finder.
Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you. -
I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?
Get a Virtual Macine software program, Parallels, VMware Fusion or VirtualBox, and install XP in a virtual machine.
You can't install XP in a Boot Camp Partition with Lion or Mt Lion, only Win 7. -
I have updated my imac to mountain lion it keeps coming up with URL for this type of program not recognised.Can anyone assist.Please
More details, please.
WHEN does it come up with that message?
When you boot/login?
When you try to open an application? which application(s)?
When you try to open a document? what kind of document(s)?
Does it happen repeatedly? once? intermittently? -
I have OS X 10.7.4 & my iMac is from May '07 but it's NOT compatible with Mountain Lion???
The App Store gives me the message that my system is not compatible with Mountain Lion.
Is my iMac THAT old that is it really isn't compatible for downloading Mountain Lion?? I bought it in May '07. I have OS X 10.7.4 installed.
So confused.. help please someone..Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009) -
Could someone help me with instructions for doing a clean install for Could someone help me with instructions for doing a clean install for an early 2009 iMac 20" with Mountain Lion 10.8.4 ?
Thank You,
leetruittBarney, William, nbar, Galt\'s Gulch:
A nephew stayed with us to take a course at the local community college last semester. I allowed him use of my mac for research just after I installed Mountain Lion. He decided to "help out" and ran a 3rd party clean and tune up app., Magician. The tune up wiped over 1200 titles of my music in iTunes, also a path of folders with names containing nothing but more empty folders with names. Almost every program I open and run for a short time crashes, also folders and programs are in wrong places, or cannot be located (the nephew, for instance). Up to this time I have always been able to track a problem far enough to resolve it by careful persistence and good luck, but I do not have the tech savvy to solve this one without getting in deeper. I have run disk utility saveral times and always get variations of this:
ACL found but not expected on
"private/etc/resolve.conf"
"private/etc/raddb/sites-enabled/inner-tunnel"
"private/etc/rabbd/sites-enabled/control-socket"
Also, after four years of intense daily use it is cluttered with much junk, and every app that I was curious about, and I am a very curious guy.
So I know my limits, (and now my nephew). I dumped my pc for a Strawberry iMac a few years ago, and so far every problem I've encountered, or brought on myself, the Mac has resolved with its own inner elegance - in spite of my novice bungels - and now I honestly feel ashamed, in addition to the need to apologize to a machine for allowing a peasant into the Royal Grounds - so I am calling the Wise Ones in for this one.
Crazy, I know, but to me a Mac represents something far beyond the ordinary input ➛ process ➛ output title/function customarily assigned to a machine - I sense an odd kind of morality involved, one that I need to respect.
So, these are my reasons for wanting to do a clean install, correctly.
Thank you, Truitt -
How can i open my iMac with mountain lion in 32 bit. With the Mountain Lion, some important softwares are not functioning. Please help !
Thx for yr reply. maybe i don't express myself very well. i know ML is 64 bit system. and it does not open up my VPN connection (the VPN connection i am talking here is Cisco and it is only in 32 bits) . i was wondering is there a way my macbook air 11 inch first generation can turn back into its original operation system, so that i can use the VPN connection. THX
-
I have a new iMac, running Mountain Lion, with CS6. I have the tablet with the keyboard. I'm finding that in CS6 I have to type command-C and command-V repeatedly to copy or paste anything. It is not the keyboard; I've switched that out. Is it some kind of tablet interference?
Yes, EEK!
Have you run Microsoft Update and installed the latest 14.2.4 Office update yet?
Humor me. When you perform copy, do you then establish keyboard focus by clicking the mouse pointer on the destination screen for the paste action -- before keying the paste?
Have you installed any third-party keystroke mapping software that may be getting between the operating system and these two applications?
Under System Preferences > Accessibility > Keyboard, have you enabled Sticky, Slow, or EEK! Keys?
In System Preferences > Keyboard > Keyboard Shortcuts > Keyboard & Text Input, doe the check marks look like the following: -
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me
i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me
Maybe you are looking for
-
Can't figure out why green screen is pixelating!
I had terrible problems with square pixelating on my production. any ideas on what caused this... we played with saturations all day with no effect. I did have a empty green "last frame". It seemed nothing we could do would help! I filmed with a Sony
-
ATP Tree Structure is not getting created automatically after Sales Order is saved
In one one of our scenario, when we add material to Sales Order and save with Requirement Type(under Procurrement Tab of Sales Order) , in APO there is no planned order or only planned order which is dynamically pegged created because the ATP Tree in
-
I can't get my new Extreme to configure my existing Airport devices.
I'm replacing an older Extreme which connected to several Airport devices using 802.11n at 5ghz. The new Extreme is the latest version from the Apple store. The new one works fine - I can get to the Internet etc., but I haven't been able to get it to
-
I'm currently updating the software for my Curve 9300 and half-way through downloading the modules my internet connection died, it returned a few minutes later, but the modules have not contiuned downloading, it's stuck on 279 out of 461. The only wa
-
CS4 Output module crashes with Snow Leopard
I have had many problems with Snow Leopard in my Mac Pro (1,1), which all seem to have been resolved by erase installing, with one exception. The one exception is trying to make contact sheets with the Bridge output module. It is particularly prone t