I have an ipad 2, 16GB 3G WiFi, black screen, will not reset, restore or turn-on, keeps prompting error 1600 when trying to restore, but when other ipad 2 plugged in itunes works fine. Any idea's on how to resolve?

I have an ipad 2, 16GB 3G WiFi, worked perfectly, but now black screen, will not reset, restore or turn-on, keeps prompting error 1600 when trying to restore from recovery mode, but when other ipad 2 plugged in itunes works fine. Any idea's on how to resolve?
I have tried multiple laptops with both units, re-installed Itunes, same error message on one of the units but ok on the other. Thinking I have a defective Ipad 2, any ideas on what to do is greatly appreciated.

Tried Google?  iPad error 1600

Similar Messages

  • TS1702 I recently purchased several apps that will not sync with iPod touch.  Of 5 apps, three won't sync.  Computer is authorized, I've reinstalled apps, nothing works. Any ideas?

    I recently purchased several apps that will not sync with iPod touch.  Of 5 apps, three would not sync.  I updated all software, checked authorizations, and reinstalled the apps -- no luck.  Any ideas?

    All the apps state they are compatible w/ my model iPod Touch.  No restrictions are set that would prevent syncing.  Seems like I might have had a similar problem a while back with one app but can't recall the solution -- it was something simple.

  • My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

    my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
    thanks!

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    HOW FRUSTRATING! NOW WHAT IS HAPPENING? WHEN I GO TO ANY WEBSITE THE PAGE FREEZES. TOP OF PAGE READS, MOZILLA FIREFOX NOT RESPONDING, THINK I"LL GO BACK TO IE, WAY TOO MANY ERRORS AND NO TECH SUPPORT ANSWERS

  • I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

    I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

    Ralph, Thanks for replying. There where no received SIP messages at all just the INVITE being sent but I have made some more progress. The mini does indeed just work. I can do everything that you are supposed to do to other ichat users on the internet. Very nice.
    The imac is still playing up but I have got further. I had peerguardian2 installed which unknown to me doesn't need to be running to prevent you for accessing 'barred' IP addresses. snatmap.mac.com is barred in the lists! I discovered this when I saw one of your other posts showed how to turn on terminal logging for ichat. Now that I have turned off peerguardian2 (using the disable filters option) I can make calls to the testbot and see the adverts. I have even done a video conference with the two testbots. I will just uninstall peerguardian2.
    However, I can not get a AV chat working to a real user....
    In response to your suggestions:-
    I have tried all the options for quicktime streaming but will try 1.5Mb/s again.
    The ichat bandwidth limit is set to "none". I am in New Zealand and I have standard ADSL (not ADSL2+) 7.6M down 512K up. The mini config is also set to none.
    Internet sharing is off.
    I have had parallels on the machine but the two interfaces that it installed "Parallels Host-Guest" and "Parallels NAT" are configured 'off' and show as not connected. Is this enough? I will uninstall parallels and see if that helps since I don't use it. I also have VMware's thing installed but that doesn't seem to add any interfaces.
    I need to capture a full trace of the imac to other ichat user to see what is happening but will update when I have does your suggested changes or have a trace
    Thanks again

  • My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

    My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

    Have a look at these. And please say what OS you have.
    http://support.apple.com/kb/ts1411
    http://support.apple.com/kb/ts1367

  • Ipad 2 locked up when updating iOS 8.1.3 today and will not reset or even turn off

    went to update iPad 2 from iOS 8.1.2 to 8.1.3 and it froze while updating.  Then error it could not update because of problem.  But it is locked on screen with cord to iTunes and will not reset or turn off.  Can't get to screen to do reset in iTunes or anything.  help

    Please tell me that it has NEVER been jailbroke.  If it has never been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • HT6162 My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

    My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

    Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
    The app store always gives you the option to use a previous version of the app IF it is available for your device.
    Sorry but you are stuck without new hardware.
    PJRS

  • TS4123 I keep getting error (0x80090318) when I try n sign into itunes

    I keep getting error (0x80090318) when I try n sign into itunes

    iTunes: Possible iTunes Store errors - Apple Support

  • I have Itunes on my PC. For some reason, I now have only one song in my library.  I can still access my songs through my hard drive but they don't show up on Itunes anymore.  Any idea how I can fix this?

    I have a lot of songs in my Itunes library.  However, for some reason, they have disappeared and I only have one song left.  When I check under My Music, I can see all the songs but can't access them through Itunes.  Any idea why this happended and how I can fix it?

    I think I fixed this problem a few years ago by literally copying and pasting all my audio content into the iTunes library folder. I can't remember what is called of the top of my head and I don't know if this will still work.

  • I was recently given an ipod touch and the only screen it will show is a usb cable and itunes symbol. I've tried the troubleshooting stuff on this website but it still won't work. Any ideas as to how i can fix this?

    My Ipod touch only shows a usb wire and itunes symbol when i turn it on. it does not show up on my itunes or in my computer. ive tried the troubleshooting stuff(reseting the ipod, reinstalling the newest itunes, restarting the computer) and nothing has changed. my ipod shuffle connects to my itunes just fine though.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Can't browse internet on ipad2, but laptops works fine - any ideas?

    Have a weird problem surfing the internet with my ipad2 that started out of the blue a few days ago. Everything had been working fine up until then and I don't remember changing anything or updating new software...
    Can't browse the internet on the ipad anymore, and when i point browser at website, it thinks for awhile then brings up an earthlink page (my ISP). Still receives mail/twitter though, so some data is coming through, but facebook app isn't working. And my 2 laptops connect fine, full on browsing. Also seems like my wife's new iphone is having the same problem, starting at same time.
    I really have no idea - anyone heard of this?

    Try going to Settings > Safari> Clear History, Cookies, Cache on the iPad. If that doesn't work then do a reboot of the device by pressing and holding the on/off and home buttons simultaneously until the screen goes blank and you see the apple logo. It should take about 10-15 seconds to reboot.

  • My existing purchases have INSTALL next to them, but when I try click on them it says "There was an error in the App Store. Please try again later. (100)". I've tried restarting, clearing all caches, buying and downloading new apps (which works). Any idea

    Hi - in the app store, I've logged in with no problem, but when I go into my existing purchases and have INSTALL next to everything I've bought, and try to click on them it says;
    "There was an error in the App Store. Please try again later. (100)".
    I've tried restarting, clearing all caches, buying and downloading new apps (which works), and also buying and downloading more music from iTunes too (so I update all T&C's etc too, and update all payment info). But nothing seems to solve this. Any ideas?? Thanks a lot, Greg

    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    ls -@Oaen L*/Coo* | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • I have been successfully printing from my ipad2 wirelessly to HP printer but for no apparent reason it has stopped working. Any ideas?

    Hi I have been successfully printing from my ipad2 wirelessly to HP printer but for no apparent reason it has stopped . Any ideas please ?

    Try clearing your printer queue.  Double click the bottom button to see your active apps and scroll to find your printer app.  Cancel all documents listed for printing.  Hopefully you'll b able to print again.  This solution worked for me recently.

  • Photoshop CC crashes on open, but all other CC apps seem to be working fine.

    I just installed CC last night, so I haven't had a lot of time to work with the CC apps yet... Bridge has been working fine since the start for LOTS of sorting and tagging images in the last day and a half, and I've opened CameraRAW a handful of times without issue, then this evening I tried to open Photoshop CC for the first time and got a whole lot of strange messages about expired trials and activation problems and other errors and then it crashed... At first I think my internet security software was maybe interfering with Photoshop's attempts to confirm licensing online, but I seem to have gotten that sorted out ... so I no longer get all the weird licensing errors, but right after Photoshop loads I very quickly get the "Photoshop has quit working" error and it crashes. After experiencing this issue I went and tried all my other CC apps and Premiere, Illustrator, InDesign, Bridge all seem fine... just Photoshop is giving me issues.
    I already tried "signing out" and signing back in to CC apps as suggested in the forums.
    I am using CC on Windows 7 pro. I previously have had Master Collection CS3 and CS5 installed on this computer... but I de-installed these entirely before installing any new apps. I had some errors in de-installing CS3 so I used the Adobe Cleaner Tool to ensure that CS5 and CS3 had been completely de-installed before starting fresh with CC. I don't expect this previous software is causing any issues, but I figured I'd give a complete account of my situation.
    Below are the complete details provided in the error message when Photoshop CC crashes.
    PLEASE HELP!
    Jeff
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          Photoshop.exe
      Application Version:          14.0.0.0
      Application Timestamp:          5176451b
      Fault Module Name:          atiocl64.dll
      Fault Module Version:          2.3.451.0
      Fault Module Timestamp:          4cfd9adc
      Exception Code:          c0000005
      Exception Offset:          0000000000074fd0
      OS Version:          6.1.7601.2.1.0.256.48
      Locale ID:          1033
      Additional Information 1:          5118
      Additional Information 2:          5118284d710e59d7df066d776d38eee4
      Additional Information 3:          a97b
      Additional Information 4:          a97b4a62f69517c858ce776a2c65adc9

    I got it working with the help of Live Chat tech support. There was some sort of error happening with my graphics driver... something that was not a problem with my previous version of Photoshop was now a problem with the new version. I updated the graphic card driver and software via the manufacturer's website and that helped me get through.
    After updating the driver... at first it felt like I was going backward a bit... I got an expired trial period error again on opening Photoshop the first time, but then I tried again logging out and logging back in to CC as noted previously ( http://helpx.adobe.com/photoshop/kb/cc-applications-crash-immediately- launch.html ) ... and this time that helped fix the trial error and this time that was not followed by crashing (thanks to the graphics driver update).
    I have an ATI Radeon HD 5670 graphics card. The previous version of the driver I was running did not work with Photoshop CC. I have now updated the driver to version 12.104.0.0 and everything is working now.
    Thanks to the Live Chat technician who quickly identified my graphics card as the issue!

Maybe you are looking for

  • I tried to upgrade Firefox and now I'm stuck in a loop

    I tried to upgrade to FF4 and my computer froze during installation. So I rebooted and tried to upgrade and it said I needed to reboot to complete an uninstall of a revious version. I did that 3 trimes. I was also unable to just open FF. Then I unins

  • Problem executing command line program

    Hi I have a tuxedo command line app in Solaris 2.6. I was able to execute the program from unix prompt however when I try to do it from JAVA program, it does not work. I have to execute from command line as follows $ud32<SPACE>-U<SPACE>login<nl> SRVC

  • Custom mouse icons

    I would like to import a different image for a mouse icon on several slides. I would like to create the image of a bar scanner moving so that the scanner can "read" the code in the lesson I am creating. I have Captivate 2, we will be upgrading to Cap

  • Cisco ISE: Error 5411 No response received ...

    Hi all, we've been running Cisco ACS version 4.x half a year ago, but decided to upgrade to Cisco ISE. So we've made a fresh installation with our cisco partner. At the moment we're live with this equipment, but running in a lot of troubles, as we're

  • Can't send mail to myself

    Hope someone can help me. I am running an OSX 10.4.8 Xserve My clients can't send mail to themselves. No matter what email client they use, mail sent to themselves shows up in the sent items but not in the inbox! Using webmail is similar in that afte