I have an ipad2 and we purchased an HP office jet 6600.  I can not connect to print.  In searching the net, I have been advised to get the firmware update but can not find it.  Can you advise?

I have an ipad2 and we purchased an HP office jet 6600.  I can not connect to print.  In searching the net, I have been advised to get the firmware update but can not find it.  Can you advise?

Is the HP on the airprint list?
iOS AirPrint Printers  http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

Similar Messages

  • Mac Pro EFI Firmware Update 1.1 Not installing after restart

    I've been trying to get this Firmware update installed for a month now, but every time I restart it just comes back to the screen with instructions. I've tried holding the power button down until after it blinks, until the beep, while it's blinking, after the beep- and nothing seems to work so I just hit cancel and give up on the update. I've seen others have had this problem but responses say just to hold it down for 5 seconds, but that doesn't work. Are there any other solutions?

    One solution might be that the firmware update is for a MacPro and you show having a G5.

  • I am getting a security code invalid error? everytime I try to download a app or update my current apps? I looked online and a few people are having the same issues anyone been able to get this resolved? Thanks

    I am getting a security code invalid error everytime I try to download a app or update my current apps? I looked online and a few people are having the same issues anyone been able to get this resolved? It's not just on Iphones either it's on all apple devices. I've called Apple customer service. I've wrote a complaint online as well so far no good.
    Any help would be much appreciated Love to all and thanks!

    I have done that thousands of times for my security code. Doesn't work and I have called the bank and they say no problem with my card. I have also tried useing different cards all together with no luck idk what else to do? Help!

  • HT4623 i have an ipad2 and cannot find how to upgrade to ios 6, despite visiting apple site, itunes etc. Apple is normally intuitive but this is a real labarynth?

    i have an ipad2 and cannot find how to upgrade to ios 6, despite visiting apple site, itunes etc. Apple is normally intuitive but this is a real labarynth?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • I have new ipad2 and the iTunes have only podcasts and iTunes U options. I simply can't download music or vidoes. Please help!

    i have new ipad2 and the iTunes have only podcasts and iTunes U options. I simply can't download music or vidoes. Please help!

    Not all content types are available in all countries, and unfortunately where you are you will only have apps, podcasts, iTunes U and free books - the full list of what is available where is shown on this page : http://support.apple.com/kb/TS3599 . As the terms of use of the stores state that you can only use your own country's store, you also can't get music or films from Apple from other country's stores.
    Are there other music and/or film purchase download sites that you can use in the UAE ? For music you can also copy your own CDs and sync them to the iPad

  • I have PS 6 and just purchased an iMac and am running OS 10.10.1 (Yosemite).  When i try to Save or Save As a file I get the following message:  Could not save as "Whatever.psd" because this file is locked, you do not have necessary access permissions, or

    I have PS 6 and just purchased an iMac and am running OS 10.10.1 (Yosemite).  When i try to Save or Save As a file I get the following message:  Could not save as "Whatever.psd" because this file is locked, you do not have necessary access permissions, or another program is using the file.  Use the Get Info command in the Finder to ensure the file is unlocked and you have permission to access the file.  If the problem persists, save the document to a different file or duplicate it in the Finder.  Any suggestions?  Thanks.

    Photoshop: Basic Troubleshooting steps to fix most issues
    Look under Troubleshoot User Permissions.
    Gene

  • HT2589 I just bought an Imac. I have an ipad2 and an iphone 4s. My wife has an iphone 4s. Both of us have different apple ids. Would you recommend a new one or use an existing id?  Why?

    I just bought an Imac. I have an ipad2 and an iphone 4s. My wife has an iphone 4s. Both of us have different apple ids. Would you recommend a new one or use an existing id?  Why?

    It is best to stop making all new apple IDs, as software is permanently tied to them, and you can't converge them. Make differnt ones if you plan to get divorced though....

  • Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

    Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

    Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
    Take it to whoever replaced the screen and see if they can help you.
    iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

  • I have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

    i have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

    Try changing the channel in use in case you're getting interference. 
    If you have WEP enabled on the Internet Sharing it'ss worth disabling it whilst troubleshooting the connectivity issues.
    mrtotes

  • I have an iPad2 and I can't delete some apps I downloaded that I don't want.  I can get the apps lto wiggle, but there is no X in the upper left corner for deletion.  Any help is much appreciated.

    I have an iPad2 and I can't delete some apps I was downloading but froze.  I can get the apps to wiggle, but there is no X in the upper left corner for deletion. I have tried re-setting and didn't work. Help will be appreciated.

    See if anything here helps.
    If the downloads are stalled or "waiting" - try these suggestions.
    Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
    If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

  • I see "imac-54f9d5" under the "Shared" heading in my finder. I am not connected to any printers or other Mac devices. Is it possible that someone is remotely accessing my system? How can I figure out what this is?

    I see "imac-54f9d5" under the "Shared" heading in my finder. I am not connected to any printers or other Mac devices. Is it possible that someone is remotely accessing my system? How can I figure out what this is?

    is it your imac?
    is it your your router's name?
    are you by any chance connected to another wifi router then your own because the other one was open and not password protected?

  • I have airport extreme and just purchased a D-Link DCS-932L home network camera.  D-Link says I need UpNp but the extreme doesn't support this.  Can I use port mapping?  if so anyone know how to set that up?  thanks

    I have airport extreme and just purchased a D-Link DCS-932L home network camera.  D-Link says I need UpNp but the extreme doesn't support this.  Can I use port mapping?  if so anyone know how to set that up?  thanks

    Since the D-Link DCS-932L is accessible on the local network via a web browser, you should be able to access this camera from the Internet if your router has a publically accessible Public IP address. If your ISP provides you with a dynamic Public IP address, you may want to use a DDNS service to make it easier for you to locate your camera whenever your ISP changes your IP address.
    Start the AirPort Utility > Select the 802.11n AirPort Extreme Base Station (AEBSn).
    Select Manual Setup.
    Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
    Select Advanced, and then, select the Port Mapping tab.
    Click the plus sign to add a new port mapping.
    For Service, leave the default; this will change to "Custom" once you start entering port values.
    In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your camera. In the Private UDP Port(s) and Private TCP Port(s) boxes, enter the appropriate port values that should have been provided to you by the camera manufacturer. Click Continue.
    In the Description box, type a descriptive name like "Internet Camera Access," and then, click Done.
    Click on Update.
    To connect to the shared Camera from a remote location using a Mac or PC:
    Start your favorite web browser.
    Enter either your Public IP address or DDNS-provided Domain Name, followed by a colon and the Public port number that you choose in step 7 of the previous procedure. For example: http://123.123.123.123:8888 or http://www.mydtdnsdomainname.com:8888

  • I have an Ipad2 and cannot remember how to transfer pictures from my IPad to IPhoto on my Mac computer.  Could someone advise?

    I have an Ipad2 and need to transfer pictures from it to my IPhoto app on my Mac computer.  Can you provide me simple instructions.
    Charlotte Eggers

    To copy photos to your computer that were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites then see this page -  if you connect the iPad to your Mac and open iPhoto then the it should recognise the iPad as a camera and allow you to copy those photos off.
    To copy photos that were originally synced from a computer you will need a third-party app such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.

  • I have an iPad2 and I try to update it , after I can't read my applications on it

    Hello
    I have an iPad2 and I try to update it, after I can't read my applications on it .

    Try reset iPad
    Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
    Note: Data will not be affected.

  • I have an iPad2 and apple TV all are up to date on downloads. I can mirror music and films but when I select to mirror the screen in the airplay TV there is no toggle button to turn on mirroring

    I have an iPad2 and apple tv all are current on the latest updates. I can play music and films on the ipad and these come through on Apple TV. However when I try to mirror the screen there is no toggle button. Any ideas what could be wrong?

    Hi I just solved this. You need to connect you apple tv to you pc via a micro USB cable. It then appears in your iTunes like your phone or iPod/iPad. The click to restore it, it will then download and update to the latest firmware 4.4. Once it's all complete connect back to tv and restart all your devices, iPad/ iPhone/ router.
    This fixed mine. Hope this helps

Maybe you are looking for


HashFlare