I have an ipad3(wifi  cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

Similar Messages

  • HT1766 I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please a

    I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

    There is something Definitely wrong with iOS 7 regarding DATA USAGE being logged to wireless carrier in for WIFI instead.
    I read all the previous replies and same issue.
    I rarely use my mac to sync....its all wifi sync for the last 2 years....never had this issue before... and i know it began with iOS7.... here is why....
    My iPhone was at home when I updated to iOS7 connected to wifi...but it logged Data Usage to Rogers Wireless (700MB approx)...data will never do an update over 50mb in app store (it gives the warning to use wifi) I play a lot of games and pay for them so I always update through App Store.  2 weeks later, simposons halloween update (650mb)...at home, using wifi.
    Rogers told me there was 700+mb data usage on the day of update and 650+mb data on oct 1.st (tapped out).
    Went over my 6GB plan and paid the fees.
    This has never happened before...It must come to apples attention by now...

  • Since i have downloaded the new IOS 8 my ipod touch 5G has been much slower, is there any way to downgrade and get the MUCH better IOS 7 back?

    I have recently downloaded the new IOS 8 and it has made my Ipod much slower.
    is there any way to get IOS 7 back or a way to speed up IOS 8?

    Downgrading the iOS is not supported by Apple:
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Are there any problems of using Connections other then HTTPConnectoin?

    Hi,
    I have tried to use datagram connection with the following code:
    DatagramConnection c = (DatagramConnection) Connector.open("datagram://localhost:10000");
    when i use the midp to test it, it gives out error message like:
    javax.microedition.io.ConnectionNotFoundException: The requested protocol does not exist datagram://localhost:10000
    Am i missed to setup some things?
    P.S. I am using midp and cldc version 1.0.3 and palm emulator

    the midp specification (http://java.sun.com/j2me/docs)says that only http-connection is mandatory, kvms and devices can provide the other connection types specified too.
    the reason for this is that http is the only protocol of the given, that runs on a certain level of abstarction.
    So device manufactors are not bound to a physical protocol such datagram/socket connection. How http transmissions happens depends on the kvm and the device specs.
    If you develop for a certain product category, where you know that the devices all implement datagram transmission you can do it, otherwise its recommendet do use only HTTP.
    MIDP for Palm does not implement a datagram protocol actually (http://java.sun.com/products/midp4palm/faq.html#Q5)

  • I have a keyboard that i'd like to use...don't hate me, but, it's my old microsoft keyboard. My IMAC isn't recognizing it. Is there any way I might get it to work? Thanks!

    Is it possible to sync my old microsoft keyboard to my IMAC?  I don't have the funds to buy a new one right now and like a larger keyboard...don't hate me...I love my MAC but need a larger keyboard for now.
    Thanks!!!

    USB keyboards are generic and should work without any difficulty.
    If it's a wireless keyboard, it may or may not work, depending on the drivers Microsoft uses. The following instructions apply to Apple Bluetooth keyboards but it may be useful as a general resource: Bluetooth: How to set up your Apple Wireless Keyboard. Be sure to refer to the Bluetooth Quick Assist link as well.
    More information may be found in Bluetooth frequently asked questions
    There is no way to know whether your keyboard will work or not in advance, but there is no harm in attempting to use one or the other.

  • Are there any problems with motion menus and buttons in DVDSP 2 on OS 10.4?

    I have not used DVD Studio Pro 2 since upgrading to Tiger but it appears to no longer be showing moving motion on menus and buttons.
    Are there any problems that I should be aware of when using DVDSP2 on OS 10.4?
    I have not upgrade to a newer version only because I do not have any HD software to create DVDs.
    Thanks
    Paul

    New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and he post that provided your answer with the
    tag. This not only gives points to the posters, but points anyone
    searching for answers to similar problems to the proper posts.
    If we use the forums properly they will work well...

  • Can i buy a Ipad in USA and still get wifi in Denmark? Is there any problems?

    A'm going to USA in the end of March, and i was thinking that i would buy an Ipad, but i'm form Denmark, and i know that there would be some problems if i buy a iphone, so is there any problems with the wifi if a buy the ipad in USA?

    Wifi is the same wherever you are, so you won't have problems with that.
    If you have a problem with the iPad and need to get it serviced then you may need to return it to the US to do so, especially if it's a cellular model.

  • Is there any problems in iphone 5 wifi? others connecting but mine is not.. sometimes depends on distance!

    is there any problems in iphone 5 wifi? others connecting but mine is not.. sometimes depends on distance! help pls

    Hello Angelver22,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Unable to connect to a Wi-Fi network
    Verify that you're attempting to connect to your desired Wi-Fi network.
    Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Have a nice day,
    Mario

  • 13" MBP internet connection gets disconnected when too many wifi connection's available

    I just notice this a couple of nights ago... Im using a 13" MBP I bought last June 9.  At night, when there are plenty of wifi connections being broadcast in our condominium bldg, my internet connection is very slow.  Also, the signal strength is reduced to half.  Sometimes I even get disconnected and the MBP wifi has difficulty reconnecting my wifi.  But when morning comes, signal strength is at full.  I ask my friend who also connects to the same wifi if ever he has difficulty connecting at night, but unfortunately its just me.  He is using windows, by the way.  I'm wondering if this is a known issue and have a fix already? or it's just me?
    Please help... Thanks.

    I use my 15" MBP this way with no problems at all and I have Mountain Lion installed.  So we need to look elsewhere for the problem, it's not possible to link this to the OS without further investigation (but it could be a system setting).
    I  know that other folks are complaining that Mountain Lion broke WIFI.  But if that were the case we would all have problems.  I, along with many others, have no problems at all.  I think there is something else going on.
    What is the signal strength with the lid open vs. closed?
    When you say that Safari does not work, are you getting a timeout message or a message like "You are not connected to the Internet."?  Of course this is the English version of the message, yours will be different.

  • Is there any problem about 10I oracle connect to 9I oracle  in BW

    we want to know about
    creating a new source system on BW in AIX pointing to an Oracle
    database, bw oracle use 10i database , connect to
    9idatabase(Windows) to get data for BW,
    can you tell me how 10I oracle connect to 9I oracle ??
    is there any problem about 10I oracle connect to 9I oracle ??If
    there exit problem ,how to deal with it ??
    Thank you
    ALLEN ZHOU

    Hi
    You may face some problem in BASIS side especially if one version is Open SQL and other in Old SQL
    Regards
    N Ganesh

  • Is there any problem for my iphone's battery to keep my charger connecting for few hours after the battery is full?

    s there any problem for my iphone's battery to keep my charger connecting for few hours after the battery is full?
    Sometimes i sleep and the my iphone is charging and of course the battery became full after two or three hours, and definitely i will not wake up in the midnight to just disconnect the charger, please i need your help.

    This is considered normal use. I think everybody does this, including myself. It's not something to worry about in the least bit.
    Just remember to complete a full charge cycle (allow the phone's battery to discharge to 10%-20%, then charge uninterruped to 100%) once a month and you'll be fine.
    http://www.apple.com/batteries/iphone.html

  • Is there any problem running again  "bdls" after being disconnected while r

    Hello
    I have an emergecy question
    Is there any problem running again  "bdls" after being disconnected while running it (my network connecton to laptop got broken)
    Thank you in advance

    Hi,
    Be sure that it does not continue to run. If it was really interrupted, yes, you must run it again. Otherwise you would have a lot of inconsistancies.
    Regards,
    Olivier

  • I have problem with my ipad when set up ipad asked to activation but i cant remember my apple id that i used to setup.now i can not open it .Is there any way to fix this problem?

    I have problem with my ipad when set up ipad asked to activation but i cant remember my apple id that i used to setup.now i can not open it .Is there any way to fix this problem?

    Hello Abdo_Zain,
    I would be concerned too if I was not able to gain access to my iPad.  If you are unsure what your Apple ID is, you can find the steps in this article:
    Apple ID: How to find your Apple ID
    http://support.apple.com/kb/HT5625
    You can reset a forgotten Apple ID password by going to the following link:
    Apple - iForgot
    https://iforgot.apple.com
    Also, you may be able to skip the step of entering your Apple ID if you are setting up the iPad for the first time.
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Broadband internt connectivity getting disconnected frequently

    I am using eltisalat broadband connection and using AZTECH  router. My internt connection getting disconnected frequently. what might be the reason.
    My spouse is using  sony laptop and using the same wifi connectivity and not getting disconnected.

    yes, i have same problem!

  • After Safari 7.06 update, whenever I connect to RSA Juniper Network Connect, my internet connection get disconnected. It was an issue with old Safari versions. It was fixed around 6 months back with one of Safari update. But, now it is broken again.

    After Safari 7.06 update, whenever I connect to RSA Juniper Network Connect, my internet connection get disconnected. It was an issue with old Safari versions. It was fixed around 6 months back with one of Safari update. But, now it is broken again.
    Anybody experiencing the same problem and any suggestions to fix the issue.

    Hi ..
    Try this discussion >  Can't connect to Juniper VPN

Maybe you are looking for