I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me., I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me.

I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me., I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me.

Have you asked your mobile phone operator to turn on roaming for you? and if you have you will need to turn on DATA ROAMING on the iPhone by going to SETTINGS > GENERAL > MOBILE DATA and turn on DATA ROAMING. You should then be able to see the various Indian Networks listed in SETTINGS > CARRIER and be able to make/receive calls.
If you are in India and didn't ask for Roaming to be activated on your mobile account you're stuck until you return to the UK.
OR
If you have a 'locked' phone that is tied to the UK operator then you will need to find a phone shop that unlocks iPhones but beware this invalidates any Apple Warranty. If you are still in the UK then phone the mobile operator and ask then to unlock your iPhone which they usually do if its not in a contract with them or at the end of the contract period.
Hope that helps a little, Andrew

Similar Messages

  • I wanted to know how to unlock my iphone, since I had to restore it and when it restarted, it appeared this message: "The SIM card que you currently have installed in this iphone is from a carrier that is not supported under the Currently actuvation polic

    I wanted to know how to unlock my iphone, since I had to restore it and when it restarted, it appeared this message: "The SIM card que you currently have installed in this iphone is from a carrier that is not supported under the Currently actuvation policy that is assigned by the server activion. this is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request que this iphone be unlocked by your carrier. Please contact Apple for more information. "
    I need help, I use my phone for everything enclusive to work. I appreciate if you can help. I'm from Brazil. My name and giullia.

    Did you purchase this device from Apple or an authorized reseller? It sounds as if you had a device that was jailbroken/hacked to operate on your carrier. Upon updating the iOS, it is now locked back to the original carrier the device was locked to.
    Only the carrier the device is locked to can authorize an unlock. You will need to make contact with that carrier and see if they provide unlocking services, and if they do, if you qualify for an unlock. Otherwise, you are out of luck. One that carrier can take care of the unlocking.

  • Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

    Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

    It tells you to go to Error 13 and 14 if you receive error (-50).
    Here is what I have tried...
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
    Put a USB 2.0 hub between the device and the computer. Didn't change anything.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts. Removed all virus protection and firewall.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
    Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

  • How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your repl

    How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your reply. Thanks!

    It's good to read Antoniad's post.  It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing.  However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested.  He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do.  I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing.  Those sources were quite specific and the information seemed clear.  I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad.  I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go.  The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon.  I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers.  Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account?  I don't know.  I have to find out.  If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.

  • HT1414 I have an Iphone 3GS 16gb which was working on ios 4.1.1  The phone isn't factory unlocked. I upgraded it to IOS 6.0.1 and after that i am not able  to search for networks. it shows no services.

    I have an Iphone 3GS 16gb which was working on ios 4.1.1
    The phone isn't factory unlocked. I upgraded it to IOS 6.0.1 and after that i am not able
    to search for networks. it shows no services.

    Ok thank you so much! Although I ended up taking the sim card out of my new Iphone and reinserting it into my old one it finally let me restore it! So thanks once again this really helped!

  • I recently buyed totally unlocked sprint iphone which was legally contract free and i am using that phone in india but i am not able to send sms .everything is working fine except sending sms. i have tried everything plz help me !!

    i recently buyed totally unlocked sprint iphone which was legally contract free and i am using that phone in india but i am not able to send sms .everything is working fine except sending sms. i have tried everything plz help me !! i have tried everything i.e. reset iphone /hard reset/network setting reset /sms service no i have also changed but i am still not able to send sms.. please help me as i am really worried .. thank you !!

    I had the same problem.  Kept getting message of waiting for activation or check network connections.  I also tried every solution out there and nothing worked.  This did though:  I download the newest version of itunes (through Internet Explorer - Google Chrome wouldn't work).  It pulled in my entire library thank goodness and then I plugged my iphone 4s into the computer.  I let itunes find it, did a complete backup in icloud, then did a restore.  Entire process took a couple of hours, but I now have imessage and facetime back.  I was about ready to give up on Apple and go get a different phone ~

  • HT4527 I am trying to move my library and playlists to a new computer by burning to CD's. However, I followed the directions by going to File and then Library - then they said to go to burn CD(s) - I DO NOT have that option for some reason. How do I do th

    I am trying to move my library and playlists to a new computer by burning to CD's. However, I followed the directions by going to File and then Library - then they said to go to burn CD(s) - I DO NOT have that option for some reason. How do I do this? I have done the library sharing thing but I am getting rid of my primary computer and am afraid I will lose the library.

    To move an iPhoto Library to a new machine:
    Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
    But however you do choose to link the two machines...
    Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
    Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
    and select the Library that you moved.  That's it.
    This moves photos, events, albums, books, keywords, slideshows and everything else.
    Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
    Your second option didn't work because you simply referenced her library on the old machine.
    Regards
    TD

  • When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?

    Hi all,
    I need help with my iphone4s.
    When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?
    What seems to be the problem here?
    thanks and regards
    Wan

    Wanlucg wrote:
    When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats.
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • How do I get past the pass code on iPad running on Ios7.1 because j have forgotten it and I don not own a computer so it has to be with our a computer

    How do I get past the pass code on iPad running on Ios7.1 because j have forgotten it and I don not own a computer so it has to be with out
    a computer

    Use a friend's computer. Your iPad will be erased.
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW.

    my airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW. If we don't have a solution for this question, can i set my AE to use the IP TV and how??? I'm using a 4th Airport extreme

    No, not unless it is simply a network connection.
    How is your IPTV being provided.. if it is using a separate vlan or separate vpi/vci in the adsl connection. Who is your ISP?
    Is the TP-Link ADSL?
    Is the IPTV using a separate voice channel on adsl?
    Or a different vlan.
    Sorry but it is something where a definite answer is not possible unless you provide all the details.
    The setups are unique to each ISP around the world..
    Here is one for our local ISP.
    http://www.avenard.org/iptv/Setup.html
    He has a section on getting this working with apple router over wireless.. look
    http://www.avenard.org/iptv/IPTV_and_Wireless.html
    Google around and see if other people have had success.. the whole setup is tricky.. and it is hard if nobody has used it who actually understands networking.

  • Have Creative Cloud Subscription- Windows 7 ultima--16GB ram memory-Photoshop cc 2014 updated- I cannot find the Creative Cloud Libraries instead I get My Libraries that I have not created- I cannot find the Assets tab. Tried several links no solution. pl

    have Creative Cloud Subscription- Windows 7 ultima--16GB ram memory-Photoshop cc 2014 updated- I cannot find the Creative Cloud Libraries instead I get My Libraries that I have not created- I cannot find the Assets tab. Tried several links no solution. How can I get the Creative Cloud Market Library?

    kglad,
    Thanks for the suggestion but I have attempted this many times to no avail. As I said in my original post, "I have researched this problem on this forum and the Adobe site and believe that I have tried everything over the past week."
    It is very late here (I am in Greece). I will have a further attempt in the morning. The windows machine is hut down. Thanks for your help.
    Bob

  • Any suggestions on how to get wifi to work?  I have a multitech router and can connect with a computer wirelessly but not the ipad.

    Any suggestions on how to get wifi to work?  I have a multitech router and can connect with a computer wirelessly but not the ipad.

    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398

  • I love the 6th Gen. iPod Nano but it has a major deficiency, the power button. I've bought 2 and they both have given me the same issue of the power button becoming slack and not functioning. Why is this so, and how can I fix it??

    MAJOR DEFICIENCY = WASTED MONEY:
    I love the 6th Gen. iPod Nano but it has a major deficiency, the power button. I've bought 2 and they both have given me the same issue of the power button becoming slack and not functioning. Why is this so, and how can I fix it??

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • I have given up on my dell and bought an iMac 27"... Now how do I transfer my dell iTunes playlists from my dell to my iMac, as they are showing on the iMac when I plug in my iPod but it's not allowing to me to play them as they are shaded?

    I have given up on my dell and bought an iMac 27"... Now how do I transfer my dell iTunes playlists from my dell to my iMac, as they are showing on the iMac when I plug in my iPod but it's not allowing to me to play them as they are shaded? I have also separately transferred all my music via my external drive from my dell to my iMac which is showing in iTunes but won't upload to my iPod... Just to confuse you even more my AppleTV which is linked to my log in email address and home sharing is showing and playing all the playlists I want to see on my iMac... Phew that was exhausting hope you understand and can help me:-)

    You may have transferred all your songs, but your iPad is seeing the library as a different entity.
    The following article(s) may help you.
    Moving your iTunes library to a new computer  

  • I updated to 6. In Tools, blocked cookies and now can never open Firefox. The allow cookies window is stuck. How do I get rid of the firefox browser and go back to 5. I did have malware on computer that was removed, but still ...not working

    On Saturday, Sept. 3, I updated to Mozilla Firefox 6. I went into the Toolbar, I think to private browsing, but not sure now. I asked that all cookies be blocked. A window came up from my home page that said "Allow, Allow this session only, Deny Cookies." I said Deny and it told me 19 cookies were being blocked. I have never been able to get the window to leave the browser home page. In fact, I can not make any choice in that window. The window kind of shakes. I went for professional help and did have malware that I had not known was there that was removed. Technician worked 3 hours. It was called "PUM.Hijack.Start." The Mozilla browser is still stuck like that. I am on Internet Explorer, but I would like to have Firefox back again. What steps do I take next?

    I am having a similar problem. Running Xp.
    Latest revision of firefox.
    After using firefox for a while if I exit, parent.lock is locked and i have to reboot to reload firefox.
    I have killed all firefox applications from task manager (usually there are none). and I have tried 3 different "file unlock" programs including unlocker to no avail.
    I also recently installed a program that shows -all- open files, and parent.lock is not listed, and thus not closable/unlockable from there.

Maybe you are looking for

  • Error message "... could not be found on the server."

    I have been subscribed to a podcast for 3 years. I received an error message for that subscription recently stating, "There was a problem downloading "Civil War Podcast by Dr. James Robertson Jr. from WVTF. The URL http://www.wvtf.org/news_and_notes/

  • Links do not work properly

    I'm having an issue with some of my links in iweb. I have text boxes of the top of my pages and they are linked to other pages within the same site. I created everything in iweb. I have confirmed that all the settings are correct in the inspector pag

  • Selection tool problem in Photoshop Elements 8

    I am using Photoshop Elements 8 and I am having an awful lot of trouble with the selection tool. I make a selection and then when I go to colour it in, it goes outside the lines by a few pixels, giving the selection a really fuzzy edge, almost like a

  • Multi language web part

    i have developed a web part in C# 2013 that displays tow language , after deploying it in SharePoint 2013 the web part only display English recourse  any suggestions ?? best regards

  • Lion OS X keeps crashing and restarting my computer

    I have a 15" Mac Book Pro with 4 GB ram and a 2.66 GHz processor. Occasionally when i'm not plugged into a power source, my mac shuts down in the middle of work, whether it's light browsing or if I have a lot of programs running at once, and when I s