I have An Ipod Touch 4g and My Sleep/Wake Button is stuck inside so i am unable to press it How can i fix this?
I have An Ipod Touch 4g and My Sleep/Wake Button is stuck inside so i am unable to press it How can i fix this?
If not caused by accidental damage, the iPod Touch includes a one year warranty. If your iPod Touch remains under warranty, you can call AppleCare or make an appointment at an Apple store if there is one nearby. If the iPod Touch remains under warranty you open the iPod Touch youself or by a 3rd party, doing so will void the warranty. If you live near an Apple Store, make an appointment to see if the store can get the button unstuck. If not under warranty, there won't be any charge for this.
Similar Messages
-
My ipod touch 5th gen. is not charging but is not syncing or being recognized by itunes 11 ? How can i fix this??
Hi cecebabymusik,
Welcome to the Support Communities!
Try the specific steps below for the your iPod touch first:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
I hope this information helps ....
- Judy -
I have a new i4 phone and am new to Apple. My imessaging will not send out any messages. How can I fix this? HELP
about message http://support.apple.com/kb/HT3529
troubleshooting message http://support.apple.com/kb/ts2755
settings - message - imessage - is turned ON? Do you have it activated?
Make sure you have a good wifi or cellular data connection.
Also you can only imessage other apple products who have imessage on. -
Thanks.
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have updated my iPad to IOS 8.1.2. And now I cant watch any videos anymore. Not on Facebook, YouTube, etc. How can I fix this?
We also want your phone to work the way it should be working for you.
How long does a charge last since the update?
Have you reset the network settings? Settings>General>Reset>reset Network Settings>Enter 4 digit passcode>Reset Network Settings
TamaraH_VZW
Follow us on Twitter @VZWSupport -
My Macbook is not playing sound unless i have headphones in. The light in the headphone port stays on even when they are not plugged in. How can i fix this?
You might need to clean the headphone port (I was in the same situation and this worked for me). Dirt, dust, and debris accumulate in the port and eventually the computer registers the debris as headphones being plugged in. After cleaning the issue was resolved.
-
Why won't my iPad mini download music or video's? I click the download button and it will say its downloading. Then once finished it will just disappear? How can I fix this problem?!?!
Are you using the same apple ID and password?
it seems all is in order, but perhaps the password isn't valid.
if the reset didn't work, try signing out of iTunes and App Store, then back in.
have you tried going to App Store - purchased and tapping on the cloud icon for the apps you want? You will still be asked for your password. -
It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?
Hello Whitney262,
Thanks for using Apple Support Communities.
I would go ahead and make sure you can first download the content, then remove the song from your iTunes Library, and download again from your iTunes past purchases. The article below will walk you through the entire process:
Download past purchases
http://support.apple.com/kb/ht2519
Take care,
Alex H. -
my ipod touch just turned off while i was using it and now it wont come back on no matter what i do. how can i fix this?
Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
I wanted to erase my ipod so i went on settings, then general and then i erased my ipod
but when the apple logo comes up, it just freezes right there and i try to reboot it but it keeps freezing
so how can i fix this? please helpTry a Safe Boot by Restarting and holding down the Shift key between the startup tone and the Apple logo w/pinwheel. It will take longer to boot up in Safe mode. If successful, go to System Preferences > Startup Disk > select your OSx disk and restart.
Regards,
Captfred -
when I try to back up my iPad to the computer it gives me a message saying it can't sync and there is not enough room in iTunes library. How can I fix this? I need to back up iPad content to restore on a new one
juliefrombaton rouge wrote:
when I try to back up my iPad to the computer it gives me a message saying it can't sync and there is not enough room in iTunes library.
Pretty sure it doesn’t say there is not enough room in iTunes library because it is not backed up to the iTunes library.
What is the exact message? -
My iPod is frozen and my sleep wake button doesn't work. What do I do?
My iPod touch is frozen on Facebook and will not allow me to see my home screen. When I connect to my laptop, it doesn't show up in Itunes. I've never had this problem before. Also, my sleep/wake button (not the middle one) is apparently stuck. What do I need to do?
- You can try letting the battery fully drain and then charge for atleast an hour and see if it works then. Restore via iTunes if necessary.
- You can also see if this program will get the iPod in Recovery Mode so you can restore it.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
HT1212 Restoring Ipod touch with broken/unusable sleep/wake button
got a broken sleep/wake button and my kidz put a wrong passcodes on it many times, now it is locked, is there any way I can restore this back even if I don't have it backed up with my computer? I'm just using screen home button that is why I can't restore it using the ordinary way.
Place the iPod in recovery mode using one of these programs and restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella -
When I try to buy newer apps in the store, it says to update my iPod to a newer version; 4.3 etc. But whenever I connect to iTunes, it says that 4.2.7 is the most recent current iOS. Is 4.2.7 the highest version my iPod can get?
Are you sure you really do not have a 2G iPod? Those can only go to 4.2.1
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
If you really have a 3G iPod those can go to 5.1.1 and you update by
:iOS 4: Updating your device to iOS 5 or later
You need iTunes version 10.5 or later on the computer. If you have a Mac you need OSX 10.5.8 or later. -
Has anyone ever had this problem before? I would love some advice on how to restore my library with all my music. I have 841 songs on my iPod touch and yet my iTunes library on my account says I have none, ever since my sister made her account on my laptop and some of her songs have gotten on mine (the main) account. Not only that but my iTouch doesn't seem to want to accept any other songs outside of its list. Any advice?
Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.
Maybe you are looking for
-
Hi, i face with a problem while using the bapi bapi_document_create2. it adds the file path like ' Dogan\Main\Standards\0010415--P.pdf' but i cannot open the file in cv02n. And also it adds the material master elements but the description is not seen
-
Could anyone tell me how I might be able to open .eml files in Mail? Also, how can I open them in my webmail account?
-
11.03 does not play on pressing play
Hi, Itunes was open and then I put in my external audio-interface (usb - DJ8 - Native Instruents) in the slot. itunes then did not play the music, pressing play did not work. in versions before 11.xx it took a second and the interface worked, but not
-
Internal CA - Cross Forest Enrollment
Hi, I'm trying to get cross-forest certificate enrollment working. My resource forest is built on Serer 2012 R2, and my accounts forest is built on Server 2008 R2. I have s simple setup with an offline Root CA, and an Enterprise subordinate CA. I hav
-
TS1389 Why not make apple-id available in the iTunes app list view ?
Can't apple add the apple-id field to the list view for apps ? This would really help in case different ID's are used to install apps. I know the ID can be seen with the Get-Info option, but doing that for 200+ apps to find one that won't sync is a p