I have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

i have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

Is it this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Otherwise:
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

My iPhone quits out of almost every app i go into after not a long period. everything is updated. is there anything i can do about this?

So basically everytime i go into an application it quits about 1-2 minutes in or less. i'm finding its not just one application but all of them. My phone is fully up to date and so are my apps. Anything i can do about it? its really starting to bug me that i can't use a lot of my apps.

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used (multi-tasking) list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

Apple took money out of my account. I had to change debit cards, and they won't get another one so is there anything I can do about this problem. I rather cancel the phone before I have to worry with my bank accoung.

Apple took money out of my account. I canceled my charge card and will not give them another one. Is there anything else I can do? I will cancel my account before I worry with my bank acount all the time. Now I can't even sign in for free apps

OK, so I have now found that this is apparently normal for iTunes, to only accept mpeg 4 movie files, all the searching I did before I must have worded it wrong because I couldn't find anything about this, incredibly. Had been looking for why iTunes won't take all the files it previously did, like if it had been changed, and it hasn't, it's allegedly always taken only mpeg 4 files. Also I had been searching for why iTunes crashes every time I try and add/import anything but mpeg 4 files, and even sometimes with mpeg 4 files. That isn't normal, it's supposed to just do nothing apparently as I've just found out. So for these reasons I didn't find the answer despite my searching all over the web.
So I guess that answers my own question now, but I'm still perplexed as to why I absolutely, definitely, without any doubt, had several hundred movies of a few different video file types loaded, accessible and playable in my iTunes library that everything here claims iTunes never accepted. It apparently shouldn't have been possible for me to have done this, but for probably 10 years it's been this way.
Perhaps since I don't remember adding these files to iTunes anymore recently than maybe 6 or 7 years ago, the iTunes back then did accept all kinds of file types? Or could I have somehow had some video codecs or software that expanded the capability of my movie players like Quicktime Player that unwittingly also allowed iTunes to take those files as well? All I know is somehow it worked! So now my question is how did I have it working before, so that maybe I can make it work again.

I am unable to print only the first few lines of an e-mail. Also, it will then print in a very small type and will also include extraneous information on the screen that are not part of the e-mail. Is there anything I can do about this annoying problem?

I can only print the first few lines of an e-mail, even when it is on "Full View" on my screen. Moreover, it prints with very small print that is hard to read and also contains additional material on the screen that is not part of the e-mail.
== This happened ==
Every time Firefox opened
== Since the first day I started using Firefox

I talked to Adobe Support tonight and found this issue to be a known problem with some of the Adobe Cloud products when using older hardware, in this case the C782.
So, we found a workaround. Unfortunately the work around isn’t efficient and adds more steps to their normal printing routine
Open InDesign and create, modify delete the card
Select FileàExport
A window will appear. Pick the location you wish to save the file
Once the File is saved another window will appear
“EXPORT Adobe PDF”
An Export to Adobe PDF window will appear. Accept all defaults. MAKE CERTAIN “VIEW PDF
After EXPORTING” is CHECKED
Select Export
Once EXPORT is complete the file will open automatically in Adobe Acrobat
Most likely the screen will be very large
Select the + - sign at the top of the page to adjust the page size to view the image
Select FileàPrint
The Print window will appear
Select the printer from the drop down
# of COPIES is just below Printer
Select OK
I hope this helps anyone who is having similar issues
Thanks

My iPhone 4 has been randomly dropping contacts for a few months. Is there anything I can do about this, or what might be causing this? Is there a limit to the number of contacts?

Phone drops contacts, anyone else have a fix for this?

Mine too. I "finally" got an iphone and supposedly stepped up to the now. I got an iphone 4 as it was free and I don't need every gadget available. I like some of the features, but Blackberry could teach them how to be user-friendly. And having to keep adding my kids back to my contacts is getting old. I have had to do this about 20 times and I only got the stupid thing at the end of July. Not amused and probably the last apple product I will ever own.

Lately it has been taking longer for Firefox to open and will lockup occasionally. Firefox has been my browser for years and I have never had this problem before. Its there anything I can do about this problem?

Once this happens, it takes a while like it is catching up but eventually will clear the jam. It has locked up and or crashed and I manually have to reset my computer.

This can happen if you've zoomed the page. That effects the screen dimensions as reported by JavaScript and seems to confuse Yahoo.
Reset the page zoom on pages that cause problems.
*View > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

The domain by domain automatic save for the zoom feature in Firefox has stopped working with Facebook, is there anything I can do about this?

I normaly use the zoom feature with Facebook in order to more easily be able to read and see. I like how the entire page zooms in. Recently, however, the zoom started reseting every time i click myself from any page on Facebook to any other. The zoom simply won't save at all, it just resets to the default value.

Install this add-on: https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ 
'''N.B.''' Several of your plugins are out of date which exposes your machine to attack. Please visit the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update where necessary. 
Also, update Firefox to v3.6.19 by clicking Help | Check For Updates.

Just recently, Firefox has not allowed my Hotmail to open without first showing a banner that says Firefox will not open my program and I must hit the "Allow" button to get this open. Is there anything I can do about this?

I have been using Firefox for years with Hotmail as my e-mail provider with no trouble. Now I am getting messages that say some script is running; do I want to continue or cancel and then a brown message bar will appear asking me me manually allow the opening of Hotmail. A minor annoyance yet one I have not encountered until a few months ago and would like to fix.

See: [http://kb.mozillazine.org/Menu_differences Tools > Options] > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
* [[Options window - Advanced panel#General_tab]]
See also: http://kb.mozillazine.org/accessibility.blockautorefresh
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

When converting an image from raw to jpeg , the jpeg can look flat compared to the original raw image . Is there anything I can do about this ?

When converting an image from raw to jpeg , the jpeg can look flat compared to the original raw image . Is there any way to prevent this ?

Hi Joe , Thank you for your quick response . I am viewing the jpeg in Microsoft Picture Manager and Flickr. It 's not always really noticeable , but for example if I shoot into the light with dew on the grass , the dew glistens in LRoom and I'm happy with the shot but when I convert it to jpeg ,it looks dull. I have changed the setting to sRGB - from Adobe 1998 ,but don't see much difference. Kind regards Alberto.

IPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now? Thank you for help!

iPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now?
I Don't know if I can turn it of or do I just leave it and take it to service?
I'd appreciate some advice!

Same thing happened here ~ tech guy at a local authorized Apple repair store said it had something to do with improper backup from which the restore would be made. Still have a phone that asks to be connected to Itunes but won't do anything else . . . frustrated.

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

First, back up all data immediately, as your boot drive may be failing.
Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

My Ipod got wet, now it will only power up when on docking station, is there anything I can do to fix it?

My Ipod got ran through a washing machine. I let it sit in a bag of rice for one week before trying to power it up or plug it in. When I place the Ipod on radio/alarm clock docking station the Ipod will power up and I am able to access what is on it, but it will reset itself every few minutes. Also it will not charge whil on the dock. I tried plugging it into the computer but it will not power up or register on the computer. Is there anything I can do to fix it at this point?

- After being connected tot a charging source for half an hour, reset the iPod.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Connect the iPod to your computer and and if it shows in iTunes restore the iPOd.
- Next see if placing the iPod in recovery mode will allow you to restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
Sorry I missed that you said you dried it in your first post.

I brought my ipad2 from Canada to Thailand,and put a sim card in to access wifi or 3 g, but cannot access internet is there anything I can do to fix this?

I brought my ipad2 from Canada to Thailand and put a sim card in to access wifi and 3g, but I cannot get on the internet,is there anything I can do to fix this?

Two things:
1. Make sure the SIM card is enabled for data.
2. Make sure you are using the correct APN settings, in Settings - Cellular Data.

IPhone screen is dark. I can receive calls but can't make them because I can't see the numbers on the screen. Is there anything I can do about that?d

My phone got damp. It wouldn't work for about a week. Now the screen is completely dark, altho I can receive calls. I just can't make a call because I can't see the numbers. Anything I can do about that? Is this a simple repair?

Yup, it sounds like your iPhone needs to be sent in for service.

I have a 5th gen iPod, and I can't get it to be recognised by itunes, and the actual ipod does no load frther than the apple logo before turning itself back off. Is there anything I can try?

It is refurbished and looks to be in perfect condition and was bought from the apple store, including box and serial number. Any help is greatly appreciated!

chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

I have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

Similar Messages

Maybe you are looking for