I have an old SB! Live soundcard with a gameport and standard ports, I was wondering
Like I said, I have a reasonably old SB! Li've soundcard with a gameport and standard ports i.e. (speaker, mic, line in etc.) I want to get a little audio mixer to do some recording, I figured I'd have to buy a new card but then i saw this little adpator they had on another card and I wondered, I'm already using the port on my soundcard for a Midi keyboard thanks to a little adaptor. Do you think it will possible if I get an adaptor like that one on the card in the picture I could plug a mixer in?
http://www.m-audio.com/images/global/product_pics/big/audiophile2496.jpg
You can transfer the purchases you made on your old iPhone 3 by plugging it in to iTunes and doing File > Devices > Transfer Purchases from your IPhone to the iTunes on your computer. This will get music you purchased in iTunes, apps, etc. (e.g., movies).
But for the rest you would need to restore a backup of your newly deceased computer.
Similar Messages
-
If i have already logged in my iTunes with my iPod and plugged that in, but now i have a new iPod and I want to plug that in to my laptop how would i do that with out losing anything on my new iPod and my old one. Both my ipods are on different accounts?
Nothing special. See:
How to Set Up Two iTunes Accounts on One Computer | Chron.com
iTunes: How to share music between different accounts on a single computer -
I have an old iPhone 3 gs. with ios 3.1.3. how can i update it to at least an ios 5 because it will not let me get games on the app store because the ios is so low.
Update it from iTunes on a computer as described at the bottom of this article; there isn't a Software Update option in General on iOS versions prior to 5.0. It can only be updated directly to the newest iOS release supported by the device’s hardware, which is iOS 6.1.6 for an iPhone 3GS.
(108471) -
I have forgotten the password and do not have the old computer to sync with. I dont want to loose the data already on it?
All you can do is restore from backup, You have to erase the iPod. That is a security feature
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Just bought a new iphone 5, i have an old imac computer OSX 10.5.8 and itune version 10 (updated at great cost last year for iphone4) it dosen't let me restore data... any chance of update or do i have to thow away my computer (and never by Mac again?)
You an use your iPhone without connecting it to a computer.
But the product description for the iPhone clearly states that in order to sync with a Mac you must have OSX 10.6.8 or later. That version of the OSX is usually called Snow Leopard. There are two mo recent versions of OSX. OSX 10.7.x (Lion) and OSX 10.8.x (Mountain Lion).
If you can upgrade your computer to at least Snow Leopard I suggest you do so. -
ever since the last firefox update I don't have my old bookmarks, can't add new ones and can't add my HTML file of my bookmarks
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
I have just bought a new laptop with Windows 8 and cannot load itunes from the existing disc or online as it is incompatible.Can anyone tell me what I can do now to get itunes on to my computer? Thank you
See the futher information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
See this migrate iTunes library post for advice on moving the library over from a previous computer and this post on deduplication.
tt2 -
A few days after i've updated to iOS 8.1.1 my iphone 5s died and isn't turning on and its not charging. i have my legit charger that came with my phone and after 6 months it stopped working, i even have a charging case and that wont charge it. I google searched the problem and tried cleaning the charging port but still nothing! some please help
Please make a Genius Appointment and take it in for service.
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit -
Hi, i have a MB Pro Intel C2D with Lion OS and i migrated the user to another MB Pro i5 Lion, after migrating I'm having a problem on Safari, it won't open and just crashing
Shouldn't be having a problem, then. That's the version for ML. Try taking your question to the Safari forum - https://discussions.apple.com/community/mac_os/safari - that's where all the Safari experts hang out.
Clinton -
I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I am not able to connect the laptops to the printer. Any advise?
The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan. -
My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.
After you have installed the OSX on the new HDD in your MBP, install the old HDD in an enclosure and connect it to your MBP via USB. Then try to drag and drop your data to the new HDD.
If this proves unsuccessful, you may look for data recovery software on the Internet. There will be free trails to see if it will work or not. If the trial suggests that it will work, then you will have to purchase the software.
The last resort is a professional data recovery service that will offer NO guarantees and charge a lot of money.
As you now can appreciate, backups eliminate such predicaments.
Ciao. -
I have a mid 2010 macbook pro with 4GB memory and need to purchase an additional 4 GB to. Do I need to purchase 8GB of memory to upgrade or can a 4GB upgrade be placed next to the existing memory?
You need to purchase 8 GBs as two 4 GB modules. Must meet these requirments:
Maximum Memory
8.0 GB
Memory Slots
2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM -
if you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?
You have been syncing the iPhone with iTunes on your computer without a SIM card inserted in the iPhone for how long?
If the iPhone says connect to computer, this means there is a problem with your iPhone that requires restoring the iPhone with iTunes. As already provided, not having a SIM card inserted in an iPhone does not prevent or shouldn't prevent syncing the iPhone with iTunes. Depending on the iPhone model, it is required in order to restore the iPhone with iTunes.
http://support.apple.com/kb/ht3406
To re-activate an iPhone 3G or iPhone 3GS that displays the "Connect to iTunes" screen:
Insert a SIM card from the carrier with which you used your phone. Note: If you are using the same carrier, you can use the activated SIM card from your new device to do this. If your device is unlocked by your carrier, you can use any SIM card.
Connect the iPhone 3G or iPhone 3GS to iTunes on a computer connected to the Internet.
iTunes will then activate the device. You can remove the SIM card at this point and use the iPhone as if it were an iPod touch. -
I have an Anker Astro 3 charger with a 9V and a 12V setting. Which setting should I use for my new (3) Ipad?
Hi there,
You use only the 5 volt USB ports. Not the 9 volt and Not the 12 volt one either. The voltage must be 5 volts. 9&12 volt ports will damage your device. Below is a link to the Anker Astro 3. Check out the link. Take a look at the first picture of the Anker Astro 3. It's the photo that shows two USB ports to the left of center of the battery. Anker always labels its ports. The ones I have are labeled on the back of the battery where each port is. The product description says that there are 2 5 volt USB ports for a total output of 2 amps. So you would use one of those for your IPad 3. Hope this helps you.
http://www.amazon.com/Anker%C2%AE-Astro3-10000mAh-Multi-voltage-output/dp/B005NG KR54/ref=sr_1_1?ie=UTF8&qid=1361603389&sr=8-1&keywords=Anker+astro+3
And here is the product description,
Product Features
Huge Capacity, 10000mAh / 3.7V; 4-5 full charges or add 40 hours of talk time to your iPhone 5 / 4S / 4G / 3GS, 3-4 full charges for Samsung Galaxy S3, a full charge for iPad / iPad 2 / Samsung Galaxy Tablets, or 400%+ to most mobile phones' battery life. Also able to charge higher 9V / 12 V devices including netbooks, tablets, digital cameras, DV recorders, PSP, NDS, NDSL
Multi-voltage supports most your mobile devices: Dual 5V 2A USB ports for most smartphones, charge one device with up to 2A output, or dual devices at 2A total max. In addition, 2 voltage options of 9V and 12V can charge your SLR camera, netbook, etc; LED indicates charge level
Portable & stylish design; Easily fits into your bag to provide instant power; PERFECT for long plane flights, road trips, or whenever you need to charge your mobile devices wherever you are
Reliable Lithium Polymer battery ensures high quality; 500+ recharge cycles over the life of the battery
Package includes: Anker External Battery / 12 connectors for most phones / 6 tablet connectors / 1 UL-listed AC adapter / 1 DC power wire / 1 USB spring power wire / 1 convenient travel pouch
› See more product details
Cheers! -
I have an old iMac version 10. 4.11 and I have the iPhone 3GS which I cannot upgrade the latest applications I want to buy the iPhone 4S but I need to back up all the information on my iMac and move it to a different computer contacts songs etc which is the easiest way to do this
Glenn,
I tried upgrading to leopard, even bought the software and brought it home but it wouldn't let me. So i went back to apple, gave them the specifications of the machine and been told my machine is simply too old for leopard. This is incredible to me because it really isn't THAT old (i think just a little over 6 years maybe) and yet i'm left out on the curb when it comes to using newer apple products. I understand technology moves on but the mindset that i am supposed to dump a perfectly working machine after a couple of years or face not being able to use any other apple product is counter to what thought apple was about.
Maybe you are looking for
-
Randomly while scrolling, the screen just goes beserk and gets stuck with random colored lines. And, the only way to get rid of this is to restart my entire computer. My laptop is about 3 years old now. Is this a sign of age or what? What can I do to
-
Printing to shared printer over VPN link
We have been using the cisco VPN client connected to a 3020 concentrator for a while with no issues. I have a user that wishes to print through the VPN tunnel to a remote printer from a system on the LAN. He is trying to use a program called Easy Lab
-
External HDDs not showing up on Mac mini
Hi there, I have an old Mac mini with several external HDs: one Drobo drive and three other drives of various sizes. All are connected to the computer via USB: two directly, and two plugged into the other drives. Recently, a couple of the drives stop
-
How to use Java Embedding activity, getting error
Below is a simple code where in I am just assigning input variable to output variable(of type long), using java embedding activity, and I am getting error in Java Embedding Activity step. <bpelx:exec name="Java_Embedding_1" language="java" version="1
-
The oracle_valdated RPM: keep it in your toolbox
A quick tip that seems 'undocumented' that is a fantastic timesaver for anyone installing the Oracle 11g database: you can save a lot of time using the 'oracle_validated' RPM package from the public-yum server. (From what I've gathered, this was offe