I have been editing project for two weeks and now I get ghosts of other images fromt eh project coming up in the wrong places even though the thumbnail looks right. Help.
Help. I have been editing a project for two weeks and now it gets ghosts of ohter images from the project coming up in the wrong places. The thumbnail has the correct image but the image either does not display and its black or an old image or another one shows.
When I have problems like this I do two things. First I shut down and restart iMovie. Sometimes that rejuggles the date. But I am sure you have been doing that in such a long project.
The Second thing I do is delete iMovie preferences, which can get corrupted.
Home-library-preferences-com.apple.imoviepref
Hugh
Similar Messages
-
I am unable to get my iPhone 4s to connect with my JBL Flip speaker via bluetooth anymore. I have been using it for 2 months and now it just wont find device. Any ideas?
Where exactly did you buy this phone?
Have you tried contacting your phone carrier to activate the phone?
Do you have a sim card? -
I have an external hard drive that I have used as Time Machine backup, but not for a while. Now when I plug it in, computer says this disc is not readable.
I want to keep the backups on it and not erase and start over.
Thank you in advance.
GregorIt sounds like something went wrong with the drive. Did you drop it? How long has it been sitting around unused?
-
I have had my jetpack for two months and now it will not hold it's charge
I have had it charging for hours , but only 1 bar shows..
If these steps do not help then contact VZW and have them walk you through your warranty replacement options. Pending on where the bad connection or hardware is they should be able to send you a replacement battery or Jetpack to get this problem resolved.
-
Hi,
I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
Has any other user had such a problem, and if so, how did they rectify it.
Any advice would be greatly appreciated.
Thanks in advance.
clarinet99Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up -
Have been using Foxfire for AMcG website. Now want to edit MME website. Can't figure out how to bring up second website. Whatever I do, it keeps taking me back to the original AMcG site.
Because I'm unable to figure out where to find the answer to this question on this website, would you mind emailing it to <sub>removed by a moderator -j99</sub>. Much obliged, for I'm working on a tight deadline and have no one else to turn to, being it's Sunday.
Please note this is a publicly available and web search indexed forum that the message appears on https://support.mozilla.org/en-US/questions/950640 you probably do not wish your email address to appear. Note it is possible to use the private messaging ssytem without disclosing your email address
[https://support.mozilla.org/en-US/messages/new?to=John99 me] [https://support.mozilla.org/en-US/messages/new?to=annmcgill you]Sorry I not sure I understand what you are trying to do and what the problem is, are you able to give more details please.
Are you trying to upload to a site you own ? -
I get a message on my wife's iPad " this iPad has nor been backed up,for two weeks, an iPad backs up when it is connected to wifi, locked, and charging". The message will not go away, hit cancel and it does nothing iPad is frozen on this screen. Plugged it in closed cover for a few hours, still frozen, what to do?
It also says in there connects to iCloud which i left out.Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.
-
I charged my Ipad last night and this morning there was a message from icloud that it has not been backed up for two weeks. I tried to click the ok but it will not respond. I cannot even power off the Ipad. Does anyone know what I should do?
A reset should help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons and await restart. No content will be affected.
-
Can anyone tell me how i get to speak to someone in customer service? they are retiring Forms Cental and i really need to speak to someone about the renewl of my subscription. THe live chat has been unavailable for two weeks and there is no other option to get in touch with these people. Any ideas anyone?
Hi SwarovskiUK,
I'm sorry to hear that you've been having trouble contacting Customer Care. Live Chat is certainly available--are you not seeing the chat option on the Contact Customer Care page? Or are just not able to get through?
In any case, I should be able to help you myself. What can I do for you?
Best,
Sara -
I have an iPhone 5 unlocked. I have been using it for few weeks but 4 days ago I turned it off and in the morning it had NoService. Called tmobile and apple costumer services no one helped. Did any one had this issue
If you got the Unlocked message it means it was successfully unlocked by AT&T. Apple will not relock or block it. They have no objections to it being used on T-Mobile. It is still under warrantee. Take to an Apple store. They can test it with a SIM from AT&T. If that doesn't work have them replace the phone. Have them verify that the new phone is unlocked. If it does work with the AT&T card then it is a T_Mobile problem.
-
I have been using CS6 for two years without incident. Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help?
Hi Mylenium,
Thanks for your response.
Here is the error information showing up:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Media Encoder.exe
Application Version: 6.0.0.382
Application Timestamp: 4f62fcf1
Fault Module Name: WatchFolder.dll
Fault Module Version: 6.0.0.382
Fault Module Timestamp: 4f62f37f
Exception Code: c0000005
Exception Offset: 0000000000007899
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105
Additional Information 1: 9a62
Additional Information 2: 9a620826d8ae4a2fa8b984b39290a503
Additional Information 3: 1fb3
Additional Information 4: 1fb304eee594288faeefbf1271b70d37
I am using a PC Windows 7 -
my ipad is jammed.... the screen is about icloud back up. "this ipad hasn't been back up for two weeks.bla2... but the problem is my screen is locked . i couldnt do any thing ! please help me .....
if you can not unlock your ipad, you need to plug it into itunes and do a restore.
If it will not ben able to restore you need to put it in dfu mode (holding down power and home for 10 seconds untill the screen goes completly blank) and then itunes will say it is in 'recovery'. Try that -
My Ipad has a message on the screenthat indicates that the unit has not been backed up for two weeks. When I press the OK icon nothing happens. I tried to shut the unit down and the red slider does not function.
A reset should help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo reappears, release both buttons and await restart.
-
My daughter has been in peru for 5 weeks and has her phone on airplane mode and wi-fi and has successfully texted and facetimed when having wi-fi. Now it is no longer working? Any ideas?
Basic Troubleshooting Steps when all else fails
Quit the App by opening multi-tasking bar, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.
Relaunch the App and try again.
Restart the device. http://support.apple.com/kb/ht1430
Reset the device. (Same article as above.)
Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem. -
It has been doing this for a week and the music is faint while the static is louder than it. I try plugging it in to my iTunes and when I un-plug it, it still makes the loud static noise. I have also tried tapping my knuckle on the back of my ipod nano. This has not damaged it at all nor caused this to my ipod. There is no water damage to the ipod. Only a few scratches from a couple drops. The drops have been on concrete but not at a very high distance. How to I stop this? Do I need to replace my ipod instead?
Have you tried a different pair of earbuds/headphones to rule out a pair of damaged/faulty ones? You might also want to make sure the headphones are securely and firmly seated in Nano's headphone jack. Lastly, check the headphone jack for any signs of debris or damage. You may need to have the headphone jack replaced either by Apple or a third party repair company.
I assume this static is present on any track you listen to versus only particular ones?
B-rock
Maybe you are looking for
-
Creating a new folder using a Database Link
I'm trying to create a new folder from another database with Discoverer Administrator. The schema that I'm using is the same on each database but when I select the other database using the database link, Discoverer Administrator will get all the user
-
Gateway hostname and gateway service name for XI
Hi, Where can i find the Gateway hostname and gateway service name for XI Integration server. I need this info to input for creating RFC for SAPSLDAPI. Thanks in advance. Sri
-
Automatic cache for ABAP Cache( SXI_CACHE not happening)
Hi All I have installed the PI 7.0, configuation went well, have developed the sample ineterfacess and these interfacess are working fine... The problem i am facing is the ABAP runtime cache is not getting updated automatically, after say10 min of ea
-
How to get a count of unique records
How do you get a count of unique records? Looking only for one number, not a list..so if the data is: ID === 1234 1234 1234 1236 1236 1237 Then, the count total will be one field called 'ID' with the value '3' in it.. All I know how to do is get a co
-
HP Envy 4500 not printing from Outlook 2010
Just installed 16 HP Envy 4500 printers on multiple systems running Windows 7 Pro in both 32 and 64 bit versions. I have some on both versions that will not print emails from Outlook 2010 as well as 2007. Drivers are up to date and have been deleted