I have been having problems with my speaker. After the recent update I am unable to listen to movies or music using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears.

I have been having problems with my speaker. After the recent update I am unable to listen to movies, music or apps using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears and then disappears after the headset is removed. This is quite annoying. My child's Apps that he likes to play will not even make a sound. HELP!!!

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.

Similar Messages

  • I have been having problems with my iPod touch and my WRT...

    I have been having problems with my iPod touch and my WRT54G router. I am so frustrated right now because after following the various steps mentioned in one of these threads, following Earthlink's prompts, and speaking with Apple, my iPod touch will still not work. It is connected to the internet but will not download the pages. It is quite frustrating. I have changed from WPA to WEP, I switched the 4th Generated key to the 1st. I've disabled this, enabled that. I've done just about everything. I updated the firmware. I made the switch from a partial bridge to a full bridge. Still nothing seems to work. Does anyone have any other suggestions? The one thing I have not done is enter the Apple code into the iPod which searches for website...-- I cannot access the internet with my iPod so this web address does not work. If anyone has been successful, will you please give me step by step instructions? Yesterday I was on the phone with Linksys for about an hour. Before that with Apple for about an hour and before that with Earthlink. How it is that I can walk into a Bread Co. or Apple Store and immediately connect to the internet with my iPod but I can't in my own house?? Everyone seems to think it is someone else's problem so I've gone around and around. Not one of the Linksys support personnel suggested I look here on this community forum. I had to pay the $9 fee to have advanced Linksys help but still my iPod does not work and when I called back, the man I spoke with seemed to think the case was closed because my PC, Laptop, and iPod are connected to the internet -- the iPod just won't download the webpages or get mail. My iPod's IP address begins with 192. I would appreciate any help on this matter
    Message Edited by AlliW on 10-02-2008 02:06 PM

    I had the same issues with my iPod touch & iPhone. It's a known issue with the touch & Linksys G routers. Go into settings on the touch & do the following.
    1. Settings - wifi - linksys
    2. Erase your DNS settings & input same numbers as in router
    Settings.
    3. Http proxy should be
    in off position.
    4. Close out & open safari you should now have a wireless
    connection.

  • Since upgrade to ios6 l have been having problem with wifi connection and connecting to App Store and iTunes store

    Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
    ~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have been having problems with my FaceTime for the last few weeks. Up to then I was able to use it daily and then it suddenly stopped functioning. I have 4 friends in the same situation. Is there a problem centrally with Apple? Anyone else with problems

    I have been using FaceTime regularly over the past year or so and suddenly it has stopped working. It seems to dial up and says its connecting and then just switches off. I have a number of other friends who are also having problems with this and also on their iPhones. Does anyone have an answer to this problem?

    Make sure all parties are running IOS 7.1.1
    http://support.apple.com/kb/TS5419

  • I have been having problems with YouTube functionality when using Firefox, some of them having begun with the latest Firefox update

    After a fairly recent update, I began having the option to paste text disappear, I've had backspace cause the browser to go back to the previous page while in a text box, and other issues which are apparently a matter of Firefox not recognizing the fact that I am typing in a text box.
    After the last update, suddenly YouTube video page URL links no longer translate into links containing the title of the video, and also things like the use of bookend asterisks in order to have text appear in bold typeface no longer work.

    i have the same problem with the above..firefox is running too slow with the games in facebook..but it runs good when browsing my updates, msgs, photos...firefox is totally opposite of IE..IE is faster with the games and slow while browsing..i love to use mozila but when i do games it really pisses me off...hope you could help me..

  • I know why I have been having problems with FF 3.6.16 and the last thunderbird update

    I am in Canada and for some reason downloads for both 3.6.12 FF and the last Thunderbird update was the BritishVersions thats why I have UK search engines, not the US versions maybe that is why I am have trouble with my email and addons. The other 2 computers in my house is the US versions.
    But there is still something a bit screwey with 3.6.12 some of the addons are not working properly on the other puters. Can you please change the sofware to the US version please????? Thank you
    I have deleted the software twice already. before realizing I was downloading the british version.....same problem with my Thunderbird can't connect to isp even though everything is done correctly!!!!! Help!!!!!

    You probably can do that.<br />
    If you keep the wrong language then remove the offending language pack from the chrome folder in the Firefox program folder.
    You may need to (re)set the pref "general.useragent.locale" to the preferred language ("en-US") on the about:config page.<br />
    You can open the about:config page via the location bar, like you open a web site.<br />
    Use the Filter bar at the top of that page to quickly locate the pref.

  • I have been having problems with flash opening the Weight Watcher Plan Manager.

    SInce the flash update on July 26th I have not been able to open the plan manager in Weight Watchers. I have uninstalled flash and reinstalled it a number of times.  I even reinstalled an older version and it does not help.  I have already done a clean install, deleted cookies, history and the cache.  I have contacted WW and they are no help.  I usually use Firefox, but it also does not work on Chrome, or IE9. Any ideas?

    You have the latest version of Flash Player installed, and it seems to work (since you can see the Flash animation on the Adobe website).
    A few things to try:
    disable Hardware Acceleration; see http://forums.adobe.com/thread/891337 (re-enable it if it does not resolve your problem)
    disable Protected Mode; see http://forums.adobe.com/thread/1018071 towards the end (re-enable it if it does not resolve your problem)
    try another browser, e.g. the 64-bit version of Firefox: Waterfox, or Internet Explorer

  • I have been having problems with 2 of my phones

    i have a nokia 6085 and although i have had it a while i havent used it. i have put my vodaphone sim card in it and it recognises it but will not let me phone or text anyone. vodaphone are not to blame as my sim card works in any other phone. it just says error in connection.
    I also have another phone n73 phone which i have given to my husband however his sim card is a o2 on my phone is vodaphone. we have paid vodaphone 20 to get it unlocked but they have told ud the code nokia are providing is not the right code can you please help as we are unable to use these phones which are both under warranty.

    It is possible that there could be damage to the SIM that the 6085 can't get past but another phone can, does any SIM work in this phone? If the phone is faulty, then with a basic model like this the most you can do is restore factory settings, which I suspect will not help in this case. You may have to get the phone repaired by a service centre?
    The only company with the legal authority to changed the lock status of a SIM-locked phone is the network to which it is locked. If the phone was factory-locked, then if the network has lost the code they can apply for it from the manufacturer (only the network can do this, manufacturers will never give unlocking information to the public). If Vodafone have given you incorrect codes or instructions how to enter them, and you have made several attempts, then the phone SIM-lock status could itself be locked as they only allow so many attempts in case of theft.
    Vodafone are the only people who can legitimately assist you with unlocking your phone.

  • TS3899 How do I fix my email account on my iphone 5? I have been having problems with my hotmail on my phone. Please help.

    At first I deleted my account as suggested by the support article and instaled my hotmail account again.
    Now I don't have access to my email anymore.
    Please help.

    No, hotmail is having problems:
    http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
    http://www.engadget.com/2013/08/14/outlook-outage/
    http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
    http://mashable.com/2013/08/14/outlook-down/
    http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

  • I'm working on my iMac PowerMac8,2 PowerPC G5 (3.1) 2 GHz machine and have been having problems with the computer shutting down unpredictably. After the problem becoming impossible to work with, I shut the machine down. Now a little better, but reoccuring

    I'm working with my iMac PPC G5, PowerMac8,2, 2 GHz machine running OS X 10.4.11, and was having a problem for a while with the machine shutting down unexpectedly. There was no clear pattern to when it was shutting down as far as I could tell. For a while, it would also not restart when buttoned on.
    I set the machine aside for a while, probably a month or more, and then got it back out after its rustication. It started up and runs significantly better than it had been, but I have noticed it shutting down sometimes now again, though not as frequently as before. Sometimes it runs for a good long time between active work, sleep mode, and active work again. Once in a while it does shut down when no one is working on it (while asleep). But now it always restarts when buttoned on.
    I've done the thorough vacuuming of any dust from the unit vents. I wonder if there's anything else I should try. In most other ways the machine works pretty well and has become the family desktop for basic uses, so I'd like to keep it running if I can. A little frustrating to not be able to upgrade all programs (iTunes) to useable versions, but that's another story....
    I would appreciate any ideas about the shut down problem.
    TCC

    Option 1
    Reset your PRAM.  Press and hold down the Command Option P R keys while starting your computer.  You will hear the startup chime.  continue holding down those keys until you hear the startup chime a second time.  Release the keys.  If the computer restarts, you will need to reset your Date and Time.  It might be time to replace your PRAM battery.  The G5 iMacs require a 3 volt CR2032 lithium watch/camera battery like below:
    http://eshop.macsales.com/item/NewerTech/CR2032/
    You can find these batteries at Walmart, Kmart, Target, most local drugstore chains, for between $3-$5, or at Radio Shack for $12-$20.
    If you have any G5 iMac model EXCEPT the iSight version, you can probably do the battery install yourself.  Watch this video on upgrading your iMac's RAM to show you how to remove the back of your iMac, if you don't already know how:
    http://eshop.macsales.com/installvideos/imac_g5_mem_m/
    While you have the back off, use a can of compressed air to blow the dust out the vents at the bottom of the iMac, the fans, and anywhere else you can.  Also inspect the 28-30 capacitors on the logic board.  Look for dark spots, if they look puffy or swollen, or leaks.
    Option 2
    Reset the SMC by removing all cables (USB, Firewire, Ethernet, Modem, Power cord) from the back of your computer.  Let it sit for one minute.  Press and hold the power on button on the back of the iMac while plugging in the power cord.  Release the power on button.  Count to five, the press the power on button again.
    Option 3
    Place your original, came with the iMac when purchased install disk, into the slot on the iMac, press and hold the C key while pressing the power on button on the back of the computer.  (If you have upgraded your OS from when you purchased your iMac, example your iMac came with OS 10.3 installed, and you're now using OS 10.5, then use the OS 10.5 Retail Install disk that you had used to upgrade your OS instead of the original, came with the iMac disk.) 
    Continue holding the C key until you see the OS starting to load.  DO NOT do an OS installation.  At the top Menu bar, select Utilities or Utility, and pull down to Disk Utility.  On the left side of the window that opens,select your normal OS drive.  Click First Aid at the top middle of the window if it isn't already selected.  Click Repair Disk from the lower right area of the window.  When that is done, click Repair Permissions to the left of the Repair Disk button you clicked earlier.
    When that is done, quit Disk Utility.  From the top Menu bar (I think its under Utilities) select the Start Up Manager, and choose your normal boot volume as the startup disk.  Restart the computer.  If successful, and you've rebooted from your normal startup disk, eject the install DVD/CD, and you're good to go.
    Good luck.

  • I have been having problems with e-mails coming through to my 3g iphone recently, my e-mail provider recommended diabling the SSL as a default option but im not sure where to find this on the phone can anyone help?told

    Please can you advise how to disable the SSL on my iphone, i am not sure where the setting is.
    Thanks
    Tania

    Go to Settings/Mail, Contacts, Calendars.  Tap the name of the email account. If you don't see a bar labeled "Advance" near the bottom,  Tap Account.  Tap Advanced.   Under Incoming Settings, there should be an option to Use SSL.  If it is ON, tap it to turn it off.

  • Iphone 6 continually searches for network. Tried reset numerous times with no luck. Removed sim card. I have been having problems with it since update.

    iphone 6 will not find service. I have tried resetting numerous times. It worked once but soon after lost service again. This problem started gradually last week and if I shut phone off it would usually find service again. This time nothing. I have tried every reset, removing sim card,and restoring from iTunes. Nothing works.

    Its still in warranty. Take it to an Apple store. Make an appointment first.

  • Why is my volume not working I have been having trouble with it

    I have been having problem with the volume it was garbled and now I have no volume what so ever please help fix it I have checked every thing on my end

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords

    I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .

    Connect the device to iTunes and restore from the most current backup.
    If the issue continues, restore as new.

  • I've been having problems with the battery draining within half an hour of it being fully chargers. I have an iPhone 5c and haven't had it for long. How do I get the troubleshoot email to check it out? iPhone 5c

    I have been having issues with my battery capacity. The battery will drain within half an hour with it being fully charged when the battery normally lasts me all day. I haven't had the phone that long so it most definitely shouldn't be happening. I went to my service provider about the problem and he said to go into the apple website, click "support" and then "battery capacity issues" to which you then type in your email to troubleshoot the problem on your phones however, I cannot find this. Someone help me out!

    He may have been referring to: https://www.apple.com/support/contact/
    On the linked page, click "Get Started" then on the next page click "iPhone" then on the next page "Battery, Power & Charging" then "Battery questions or troubleshooting"

Maybe you are looking for

  • XSQL with jdk1.2.2 - javai.dll error

    I successfully used the xsqlCommandLine utility with jdk1.1.7. When I try with jdk1.2.2, I get an error that javai.dll is not in the path. If I put javai.dll from the 1.1.7/jre/bin in my path, the xsqlCommandLine process runs without end, as if windo

  • File:reference help

    how do i get the dialog box to open only once and have multiple files downloading. I dont want to use zip or any compression folder types. This is for a standalone player

  • Removing unused IDOC fields

    Hi All , Removing unused IDOC fields using an XSLT editor is possible? If so, we can import them the IDOC as XSD correct? What will be the immediate benefit of such a tweak? Thanks XA

  • "Unable to load DLL '/system/usr/lib/libidlprinter.so': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"}

    I am using intermec printer (directly loading to the printer no system used for printing) for this program and if i run this,i'm getting this below error "Unable to load DLL '/system/usr/lib/libidlprinter.so': The specified module could not be found.

  • DHCP subnet settings blasted by 10.7.1 server update?

    I dutifully applied the 10.7.1 update this evening to my Mini Server (July 2011) and restarted. Some of the clients on my network were fine but others - those whose DHCP leases expired - had issues getting a new lease.  In fact, when these devices we