I have been taking photos for years and have thousands.  When I use Apple TV screen saver, it seems only to grab a handfull and repeats them.  Is there a configuration setting that will allow me to have the screen saver grab more than just a few?  Thanks.

I have been taking photos for years and have thousands.  When I use Apple TV screen saver, it seems only to grab a handfull and repeats them.  Is there a configuration setting that will allow me to have the screen saver grab more than just a few?  Thanks.

The device has an 8GB drive for caching streamed meida, a small portion of that is used to temporarily store photos for the screensaver. It may vary depending on resolution etc but it seems to be around 100.

Similar Messages

  • I have been taking photos with my Ipad for several months and sending them via email and Facebook.  Now it will transfer photos to FB but not email addresses.   What could be the problem?          email an

    Have been taking photos with my Ipad and sending them to email address and FB.  For some reason it will now send photos to FB but not my email address.  What could be the problem?

    Does your email provider have a limit on the total file size allowed on their server? It could be that emails with photos send in the past are still on your email server. They might even be in the servers trash folder. If the total MB of those emails exceeds the amount allowed then no additional emails can be received. Try using a web mail page to check and edit what's on the email server.

  • HT204053 I want to be able to setup a generic corporate Apple ID to use with icloud and Find my Iphone, that will allow me to have more than 10 devices assigned to the ID. What do I do?

    I want to be able to setup a generic corporate Apple ID to use with iCloud and Find my iPhone, that will allow me to have more than 10 devices assigned to the ID. How do I go about creating this account?

    I'm not sure if I understand your question, but if you create a new iCloud account with a different ID your existing ID isn't effected by this.  It will continue to work as it does now, you will just have an additional Apple ID.  If you have an earthlink email address you can continue to use it as a separate account, and it can continue to be your default account if you set it to be (in Settings>Mail,Contacts,Calendars>Default Account).  If I'm misunderstanding your question, please explain further.

  • What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes.  I really need to update my iPhone and CAN'T!!  GRRRR!!!

    What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes.  I really need to update my iPhone and CAN'T!!  GRRRR!!!

    Minimally you need Snow Leopard or greater:
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • I have a Mac OS X version 10.5.8 and recently got an Iphone4. I can not access Icloud from my computer. Is there any software, new operating system or anything I can purchase that will allow me access to the cloud?

    I have a Mac OS X version 10.5.8 and recently got an Iphone4. I can not access Icloud from my computer. Is there any software, new operating system or anything I can purchase that will allow me access to the cloud?

    Upgrading to Snow Leopard, Lion, or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
    Be sure your computer meets the minimum requirements:
    Apple - OS X Mountain Lion - Read the technical specifications.
    Macs that can be upgraded to OS X Mountain Lion
      1. iMac (Mid 2007 or newer)
      2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
      3. MacBook Pro (Mid/Late 2007 or newer)
      4. MacBook Air (Late 2008 or newer)
      5. Mac mini (Early 2009 or newer)
      6. Mac Pro (Early 2008 or newer)
      7. Xserve (Early 2009)
    Are my applications compatible?
    See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
    Am I eligible for the free upgrade?
    See Apple - Free OS X Mountain Lion upgrade Program.
    For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.
    Model Eligibility for Snow Leopard and Lion.
    Snow Leopard General requirements
      1. Mac computer with an Intel processor
      2. 1GB of memory
      3. 5GB of available disk space
      4. DVD drive for installation
      5. Some features require a compatible Internet service provider; fees may
          apply.
      6. Some features require Apple’s MobileMe service; fees and terms apply.
    Lion System Requirements
      1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or
          Xeon processor
      2. 2GB of memory
      3. OS X v10.6.6 or later (v10.6.8 recommended)
      4. 7GB of available space
      5. Some features require an Apple ID; terms apply.

  • Is there anything out there I can plug in to the USB socket that will allow me to adjust the volume?

    Is there anything out there I can plug in to the USB socket that will allow me to adjust the volume?
    I didn't like the iPod Touch user interface at first, but then I got used to it and now I'm back on the old scroll wheel and finding it a bit clunky to be honest. Whatsmore, I can no longer adjust the volume easily by putting my hand in my pocket and pressing the sides. Why did Apple not think to put one on them, sometimes the design over usability thing is taken too far.
    Some buttons for easily flicking tracks and pausing would have been handy too.

    http://www.apple.com/feedback/ - Apple products feedback links

  • I have been buying apps for a long time  without a problem using my credit card on file. All of a sudden itunes is not recognizing my card which is in good standing. All the info is correct but itunes/apple says it doesn't  match the bank info. Any ideas

    I have been buying apps for a long time  without a problem using my credit card on file. All of a sudden itunes is not recognizing my card which is in good standing. All the info is correct but itunes/apple says it doesn't  match the bank info. Any ideas?

    Answered in your Other post on this Topic...
    https://discussions.apple.com/message/24053626#24053626

  • Is there a plug-in that will allow me to view CR2 (raw) files from a Cannon 5D Mark III to PSE 9 ?

    is there a plug-in that will allow me to view CR2 (raw) files from a Cannon 5D Mark III to PSE 9 ?

    The 5D.3 was first supported in ACR 6.7 which you need PSE 10 to use, so there is no plug-in for PSE9 that will allow opening the files from a camera newer than when PSE9 became obsolete.
    Besides getting PSE12, assuming it is supported on your current computer—check the specs, you can use the free DNG Converter available from http://www.adobe.com/downloads/updates.html 
    to convert your CR2 files to DNG files that are compatible with older versions of ACR.  Be sure to set your DNGC compatibility settings to a version old enough to be openable with PSE 10’s ACR.
    As far as whether the OP is serious, it doesn’t hurt to ask the question before spending money on something you didn’t need.

  • I am looking for an app that will allow me to change the times on my desktop  pictures

    I am wanting an app that will allow me more choices in changing the "change time" of my desktop pictures. 5 seconds in too fast, one minute longer than i want. I am looking for something that will give me a 10-15 second time.
    Any suggestions?

    Hi.
    Pages, part of the iWork suite from Apple.
    File formats supported by Pages
    iWork system requirements
    I hope this is helpful.

  • IS THERE A 875p bios that will ALLOW PERFORMANCE MODE enabled in 5:4 setup

    if i run my pc3200 (400mhz) ram at 333mhz in the bios, performance mode doesnt work. no matter if it is on SLOW,TURBO,FAST,ULTRA, i get the  same perfomance marks in programs. cpuz might say its enabled...but it really not. my sandra scores stay the same. when running 1:1 my performance modes work perfectly. any bios version out there that will allow this?

    Isn't performance mode (PAT, MAT, HyperPath or whatever) tied to the 1:1 synchronous clock operation?
    Are we 100% certain that CPU-Z and Sandra are able to detect PAT/MAT/HyperPath mode properly?

  • Is there an updated cable that will allow a generation 5 ipod to connect to a wv jetta 2012?, Is there an updated cable that will allow a generation 5 ipod to connect to a wv jetta 2012?

    Is there an updated cable that will connect a 5th generation ipod,touch to a vw jetta
    wagon?

    One of these adopters/cables should work:
    http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=45
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45
    However, check with VW, some accessories like car systems  do not work with the adopter and/or iOS 7

  • HT204382 a .flv document could not be opened. The movies file format isn't recognised. Is there additional software available that will enable quicktime to open the movie

    I wanted to view a document with a .flv extention (0.1. Launchpad.flv) on my mac book pro. The following message came up
    The document "o.1. Launchpad.flv " could not be opened.
    The movie's file format could not be recognised
    Is there some  additional software is available that will enable quicktime to open the movie?

    I'd get VLC & try that, although Perian may still work to play within quicktime, but it's no longer being developed.

  • Is there an email account that will allow me to use a different from address with a POP account

    Need to be able to delete emails (I have an Optonline address) from iphone and ipad during the day, while retaining them on Mac Book Pro to view and file into folders in the evening. 
    Seemed like I could have my optonline emails forwarded to a Gmail account and just set up the Mac's mail to use my optonline account, while the iPad and iPhone used my Gmail account.  That worked, except for one issue - when I sent mail from the iPad or iPhone it would use my Gmail address and then people who used "reply" would have their replies sent back to my Gmail account.  I wanted to continue to use my optonline address since I have had this address for many, many years.  I saw that Gmail allows you to "send using a different from address", however because optonline is a POP account, they do not support the settings in Gmail and therefore I cannot get my optonline address to be verified by Gmail, meaning my emails continued to be sent from my Gmail address on my iPhone.
    I even tried setting up the Gmail account manually (using "Other" in the ipone settings) and putting in a comma with my optonline address in the address field, but still no success.
    Next, thought I'd try Yahoo mail - same thing - only sends mail with my Yahoo account.
    Then looked into iCloud since I use that for syncing Contacts and Calendars on all 3 devices - same thing - I can only send email using the @me.com address.
    Does anyone know of any other mail account that will work with my POP Optonline email address?  After 10+ years with this email address, having to announce to my world that I am changing my address (either to Gmail, Yahoo, or the iCloud's @me.com address) is something I really don't want to do.
    However, leaving just my optonline account on all 3 devices means I am constantly deleting the same emails on 3 devices everyday, which is also just not an effective use of my time.
    Please help!

    Here's one possibility:
    http://www.ideaflight.com
    The only way to keep students in the presentation, though, would be to lock the iPads to that app via the Guided Access mode:
    http://support.apple.com/kb/HT5509
    Whether you can do this remotely through one of the various mobile device management (MDM) soutions I don't know.
    Regards.

  • Is there a remote adapter that will allow me pocket control

    I own a pair of Audio-Technica MTH-50 headphones that sound great with the iPhone.  The one problem is that the input is large, and needs to fit flush against the phone.  I like to have my phone in a case, so I can't really use the headphones unless I'm willing to leave my phone unprotected.
    One of the suggestions I've received about getting around this is a simple headphone adapter, which would plug in to the top of the phone, then allow me to plug my phones in above the case.
    This seems impractical, as I don't think the trade-off is worth it.  I wouldn't, however, mind it if I could add an extra feature.  So is there a headphone adaptor/extender out there includes a remote for basic volume / play / track functions?  If so, does anyone have experience with them to recommend a certain model?  Or are they crummy enough that it's not worth it?
    I appreciate your input.

    If there is, you'll need to find one that has 3 connectors (rings), for data transmission.

  • Is there a VI availible that will allow one to interact with an analog signal

    Hello all,
     I am new to the sight and look forward to participating. I have a project that I’m working on and I would like to ask for your thoughts and direction if you’re willing. I have a few weeks left before completing an electronics program degree and Labview is one of the classes. The project I have chosen is to illustrate the differences between a micro controlled system and Labview controlled environment. I will be  acquiring a signal through a ultra sonic distance sensor. The analog signal will be produced after which  acquired  through a SCB – 68 connector block and converted using the pci-mio-16E. The sensor operates at 40 kHz emitting a 5v pulse (burst) then falling to gnd for a short period followed by a 5v rise and staying high for a period of time waiting for the return of the frequency. This time period represents 3 inches to 27 ft in distance.  I would like to interact with this signal through the distance period (portion) and output a string displaying a numeric value of the distance on the front panel obtained from an array built from different periods of the signal.  I am not clear on what Labview function offers this type of control.  I am hopeful in utilizing a vi or some type of trigger that allows me to build an array produced by some math functions.  Any help would be appreciated.
    Thank you, dhitch

    First thank you for your response, I will have an opportunity to make a capture tomorrow in class.  I believe I have run across the waveform measurement VI in my searches and am sure it’s a very good choice. The trigger VI you suggest, going by the name, should be my ticket. Would you imagine a delay or decreasing time after the capture, allowing the trigger VI time to respond to an output configuration be required?
    If I remember correctly the sampling rate capabilities are 500K samples/ second with 12 bits of resolution and as I say that it seems some of the capabilities rely on the processing speed of the computer. I guess I will kick the tires tomorrow hey.  There are 2 class periods remaining to finish our projects @ 2 hrs / class and my anxiety is a bit high. Wish me luck and thank you so much.
    dhitch

Maybe you are looking for

  • Bank Partner Type for Down Payment Request

    Dear Expert, Need help here. For example, we have 2 banks in a vendor master and each banks assigned with Bank partner type. When we post MIRO or FB60, system will pop out a screen for Bank Partner Type selection. But the bank partner type selection

  • How to increase the size of the applet/ form displayed on the bowser

    kindly guide me how to increase the size of the applet / forms displayed on the browseri.e the width and length of the forms/applet so that i can display all the controls on the form . thanks with regards

  • ISync Failure working with Missing Sync and Palm Lifedrive

    Since the begining of March I have failed to peform a sync between my Palm and G4 Powerbook via Missing Sync v5.2.1 What happens is that a Sync is launched from my Palm cradle which is picked up by my G4, the dialogie suggests that things are being s

  • WebLogic Server Administration Console shows EPM servers in ADMIN State

    Hello everyone, We have a distibuted environment for Oracle EPM: Server 1 - Foundation Services, Essbase Server 2 - Reporting and Analysis Framework We are trying to replicate one of our customer's environment and as part of that we have done multipl

  • Animation the buttons

    Hello guys, Whenever I put a new page to my web site iweb automatically adds the link to top of the page. Is it possible to add animations to those links? ( flashing or zooming) anything?