I have been using pse11 on wondows vista and it has certainly started freezing on starting and I am unable to access the organizer, the editor is ok. Have removed and reinstalled but is the same have changed the files as suggested. Have been unable to ope
I am using pse 11 0n windows vista for years and it has suddenly started freezing on starting, I am now unable to access the organizer it freezes on the blue screen, the editor can be opened. Have removed and reinstalled but is still occurring. Have changed the files as suggested, am unable to open as administrator
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?
Similar Messages
-
After updating my iPad to IOS 8.1.2, I am unable to access the Cloud with my password, even though it worked on my Macmini. I changed the password and it still does not work on the iPad. What can I do to get iPad to recognize my Apple ID/password account?
I would be helpful to know what those "basic steps" you have already tried are, but lacking that information:
Settings app > iTunes & App Stores - sign out of your AppleID
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
Sign back into your AppleID (same location as noted above) -
I want to change my iCloud account. Buying iPad we gave a virtual (forwarding) email address.
We need to change to a real address.
But when we try to change the iCloud account, we can only change the password.
Note: we don't have a Mac, only an iPad and Windows.Welcome to the Apple Community.
Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too. -
With green chroma concept, I removed the green background. Now the green background is seen black. I don't want to have any other background clip, but I would like to change the background black to white. Same like the advertisement clip in the Apple Website. Please help me.
If you want the whole of the project background to be white, you can change the colour in FCP X preferences.
If you just want white for a section or clip, use a custom Generator from the Generators Library and change it to white in the Inspector.
Andy -
I can't open the browser. I double click and nothing happens. I tried uninstalling and reinstalling but every time I do this it tells me I have to close Firefox first! I have restarted and then tried downloading to no avail b/c I get the same message.
Disable Yahoo Messenger (with the arrow on the right of your account name) in Yahoo mail.
-
hey I have a problem. I want to change my rescue email address as somehow apple has the wrong one but I don't know my security questions - but you need one to change the other. Any help?
You can get your Security Questions reset by contacting iTunes Support at either of the two links below. Select the best options for your issue, or provide specific information. Let them know you are contacting them concerning Forgotten Security Questions. They will get back to you via your primary email address, usually within 24 hours. Once your Security Questions have been reset, you will be able to go in and reset your Rescue email address on your account:
http://www.apple.com/support/itunes/ww/
or by email:
http://www.apple.com/emea/support/itunes/contact.html
Cheers,
GB -
I have an account in Adobe, but every time I work out on any product from Adobe products
The program tells me I Trail You remove and re-install the program, but problem persistsHi mahmod alsousi,
Try this:
Sign out from the Creative Cloud app and Quit it (Quit option will be available after a few seconds).
Now move the following folders to desktop:
1) SLCache
Windows: OS Drive\Program Files (x86)\Common Files\Adobe
Mac: Library/Application Support/Adobe
2) SLStore
Windows: OS drive\ProgramData\Adobe
Mac: Library/Application Support/Adobe
3) OOBE
Windows: OS Drive\Users\<username>\AppData\Local\Adobe
Mac: /User/Library/Application Support/Adobe
Now launch Premiere Pro and sign in with your Adobe ID.
NOTE: Make sure your Anti Virus/Firewall is not blocking any Adobe activation servers. Alternately, you can also check your 'hosts' file for any changes.
Thanks,
Rameez -
My rescue email is a deleted email and i have no idea what the answers are to my security questions… what do I do? How do I change the rescue email?
You will need to contact Apple support. You can use the link in the quote below from If you forgot the answers to your Apple ID security questions - Apple Support
If you couldn't send a reset email, don't have a rescue email address, or can't access email at your rescue email address, contact Apple Support. -
I downloaded a film from ITunes in HD and had problems, I upgraded to the latest version of ITunes and have then downloaded the film again in SD on my Windows 7 computer, but I still can't get the film to play, any idea's what to do next?
I've been working at the same problem for hours now and it's really driving me crazy so any help would be greatly appreciated.It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
Hello guys I have a question,or rather a problem. how can I detach yourself iPhone operator Verizon USA? I mean as to call and what to say? I live in Ukraine, and the opportunity came up for to buy cheap 4S 16GB. but on Verizon. when I insert the original SIM card Verizon and I try to activate, says: (error occurred activation, if this problem happen again please call at +1................). this is the hour to use it through the R-SIM 9 pro. everything works нормальнои calls and Internet and SMS, but I want to officially unlock. beforehand thank you
Well, you managed to find this support forum didn't you and you have an internet connection don't you? Then if you have all these things, go and find the number by going to the Verizon website and it should not be hard to find the number.
As for speaking English, this is not really our problem and it is surely something that you should have thought about before buying the phone in the first place.
You also need to know that Verizon in the US is a cdma operator and if you purchased an iPhone 4s, then it should not be locked. The Verizon 4s comes with a sim card tray that should be unlocked out of the box for use internatinoally on gsm networks, so all you should need to do is open the sim card tray and insert a sim card and you should pick up the local gsm network.
A cdma phone does not actually use a sim card, so there would be no original sim card with the phone because when it is used in the US it will pick up the Verizon cdma network without a sim card. The sim card is only for use on a gsm network which will not work in the US, but is designed to work outside the US. Open the sim card tray and insert your own local sim card and the phone should work and should not be locked.
Other than this, if you purchased the phone in the first place, it is the responsibility of the previous owner to cancel the Verizon contract. This is nothing to do with you, so contact the seller and ask them.
Other wise, go to the Verizon website and look up the number and call them. As they are the phone company, ultimately, they are the only ones who can help you. -
I have an Iphone 3gs and today I had taken some pictures and my battery was 8% i was looking at the few I had took. Then my phone died but when I plugged it into the charger and got it on I went to upload the pictures but they were deleted! All my other pictures that i have taken are still there, it just deleted the ones I took a couple of hours before it died!
I was just wondering if there is anyway of getting them back at all? and how common is this?Sounds like your iPhone was hacked to unlock and now updating locks back to the original carrier.
Where did you get the iPhone? -
My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?
Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work
-
Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help
savannahp
What version of Premiere Elements and on what computer operating system?
Please review the following that I excerpted from an older post here regarding Adobe's PRE_help comments about Hollywood Effect and mention of
Red Noir. Does any of the following apply to any of what is happening to you.
- Whenever I try to add an effect from the Hollywood Looks menu, it brings up a warning that all my previous effects on that clip will be deleted. However it will let me add those same effects *after* applying Hollywood Looks.
This is because of how the Hollywood Looks are designed to be used. Since these are effect presets (multiple effects in combination) that result in a specific "look"; they are best applied in isolation. If any previous effect is applied and we still allow a Hollywood effect to be applied, we will not be able to see what the effect does clearly. For e.g. if you already have a Gaussian Blur effect applied to your clip, and then we allow you to apply the "Red Noir" Hollywood effect, the fact that the "Reds" in the scenes will be highlighted and the others converted to B/W will not be clearly seen since the content is already blurred out. So any previously applied effects was designed to be removed. This holds good even if you apply a Hollywood look "on top of" another one. The previous one will be replaced. Having said that, you can customize the look further by either tweaking an already applied filter or by adding a newer effect on top. That is the reason you can apply an effect on top of the Hollywood Effects and not vice versa.
Please review and consider and then we can proceed from there if necessary.
ATR -
I am using ipad mini ... I was unable to access facebook since long time... Its shows error could not communicate with the server.... I had install it but result was same. Can anyone help me???
first off , from the wired computer access the router using http://192.168.1.1 .. check the firmware version .. go to www.linksys.com/download and check the latest firmware available...if the router does not have the latest firmware , upgrade it first. .. after the firmware upgrade , reset and reconfigure the router
if the router has the latest firmware , then reset the router for 30 seconds .. do a power cycle...access the router ui ..default password is admin..click on the "mac add clone" subtab , enable it and click clone....save the settings and do a power cycle..ensure that the wired computer is online
on the router web ui , click on the wireless tab ..change the ssid - any non-linksys name , channel - 11 , security mode - wpa , beacon interval - 50 , fragmentation threshold - 2306 , RTS threshold - 2307 ..
let me know if this helps you.. -
iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5). I have uninstalled in correct order and reinstalled but still getting same error message. Any help??
Take a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Maybe you are looking for
-
How to add resource files to a new folder to a project in JDeveloper 11g
Currently, new folder can only be created when creating an item within JDeveloper via setting the destination folder. I have some resource files that are binary files and created outside JDeveloper. How can I add those resource files to a specific fo
-
Error in mount FAT in Solaris 10 x86.
Hi all, I did try mount an FAT partition in Solaris, but I receive an error, see: # /usr/bin/prtpart /dev/rdsk/c1d0p0 -ldevs Fdisk information for device /dev/rdsk/c1d0p0 ** NOTE ** /dev/dsk/c1d0p0 - Physical device referring to entire physical disk
-
Failure to start XE database - spfileXE.ora file size mismatch.
SQL> startup ORA-01078: failure in processing system parameters ORA-01565: error in identifying file 'E:\oraclexe\app\oracle\product\10.2.0\server\dbs/spfileXE.ora' ORA-27046: file size is not a multiple of logical block size OSD-04012: file size mis
-
Itunes library is on a mac formatted external hdd: can windows recognize it
subject pretty much says it all. can windows recognize my mac formatted external hdd? i know when i had my ipod formatted to windows, the mac recognized it, but will the mac formatted drive allow windows to see it, play the music, and possibly move i
-
How can i check apple id use in diffrent iphons
how can i check my apple id use in different iphons