I have bought a 2nd hand late 2008 macbook air and can't install iPhoto as it requires update 10.9 or higher i can't seem to update any further than 10.7.5 help???
I have bought a 2nd hand late 2008 macbook air and can't install iPhoto as it says it requires update 10.9 or higher i can't seem to update any further than 10.7.5 can anyone help please???
Thankyou for your response... being new to this i have had a look and it says the following
This system can run the last version of OS X 10.8 "Mountain Lion" as well as the current version of OS X 10.9 "Mavericks," but does not support the AirDrop, AirPlay Mirroring, or Power Nap features. It is not supported booting into 64-bit mode when running Mac OS X 10.6 "Snow Leopard." It does support "OpenCL" and Grand Central Dispatch introduced with Mac OS X 10.6 "Snow Leopard."
Please note that OS X "Lion" 10.7 and subsequent versions of OS X, like Mountain Lion and Mavericks, are not capable of running Mac OS X apps originally written for the PowerPC processor as these operating systems do not support the "Rosetta" environment. To run PowerPC applications on this Mac, it will be necessary to use Mac OS X 10.6 "Snow Leopard" or earlier
what do i do next
Thankyou once again for your reply
Gaz
Similar Messages
-
I have bought a 2nd hand iPod Touch
I have bought a 2nd hand iPod Touch ( told it was 3rd Gen, IOS 1.1.5) I have no APP STORE and cannot see how to add apps to the iPod Touch
I can connect through Itunes via the PC but cannot seem to find a way to add apps to it.
I've tried a Factory reset/upgrade and nothing has changed. If i try to connect to Itunes via the iPod Touch , even though I have a good internet connection, I get "Cannot connect to iTunes Store"You have the original (1G) iPod touch. Those can go as high as 3.1.3 that you get here:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
You can confirm since the 1G does not have volume buttons on the upper left edge.
Identifying iPod models
You need iOS 2 or later for apps.
There are not that many apps now compatible. To more easily find them:
Old Apps
VintApps 3.1.3 for iPhone, iPod touch, and iPad on the iTunes App Store
apps for ios 4.2.1: Apple Support Communities
Finding iOS 4.2.1 Apps Compatible with Older Devices - Apple Club
HT4972 Touch Game 4.2.1 Apps: Apple Support Communities
apps for 4.2.1 (also works for 3.1.3)
Tip - Finding 4.2.1 apps that work on an...: Apple Support Communities
4.2.1 iPod 2nd generation unable to use any...: Apple Support Communities -
I'm running Lion on a Late 2008 MacBook Air.
With no other applications running, I can no longer Check for Software Updates. It gets about half way through the checking process and then freezes.
The MBA passes Disk Utility. Thoughts?
Thanks
Jim TaylorHow long do you leave it?
Mine can sometimes sit for quite a while (maybe 10 minutes??) before it finally finishes.
You could look at the relevant logs via Console (Utilities folder) to see if Software Update is complaining about anything.
charlie -
Installed Windows 8 on a late 2011 MacBook Air and was working fine now keyboard not working so cannot enter password? Caplocks key works but I am locked out on my own PC and cannot seem to get it to recognize built in keyboard,bluetooth,generic USB one.
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
Hello, I own a macbook air and I deleted the iPhoto app by mistake, I cant re download it now, do you have any answer for me how to do it?
That's an App Store problem not an iPhoto one. That forum is here
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
but perhaps you just need to try again later, as the message says.
Regards
TD -
Just updated from a late 2008 Macbook Pro and I am getting a blink on my external screen
I just upgraded from a late 2008 Macbook Pro with a AMD Radeon HD 6770M 1024 MB graphics card and I am now getting a blink (black screen) every few seconds.
Anyone know a fix.
ThanksYou could always give it a shot - the only problem that you might run into is that the the early 2011 might not boot when the hard drive is swapped from the 2008 hard drive. Some versions of OS X are simply not compatible between different models.
But it's worth a try...
Clinton -
HT1338 i have a macbook air and need to install a hp laserjet 1018 drivers
hi i have a mac book air and need to install drivers for hp laserjet 1018 and dont seem to be having alot of luck!
Latest are at http://support.apple.com/kb/DL907.
-
I just got a new 15" MBP and I want to give my older one to my son. The "older" one is an Early 2011. My son has the Late 2008 model. My brother will take the 2008 MBP once I've moved all my son's stuff to the 2011. Here's the question. My son has a 750GB hard drive on the 2008. He has partitions on it for Boot Camp and for his games. The 2011 only has a 500GB hard drive. Rather than erasing the 2011, restoring it from Time Capsule, then setting up Boot Camp and the other partitions all over again, or even using Winclone or something like that, can I just swap the hard drives? It would certainly faster and easier. I just wonder if there is a technical reason why I shouldn't do that.
You could always give it a shot - the only problem that you might run into is that the the early 2011 might not boot when the hard drive is swapped from the 2008 hard drive. Some versions of OS X are simply not compatible between different models.
But it's worth a try...
Clinton -
Late 2008 Macbook Air Hinge Problem
Hi guys, I bought a used Macbook Air a few months ago, I absolutely love it. However the hinge has been getting kinda loose, to the point where the screen will start to fall backwards if the laptop is moved at all. I am told Apple replaces the hinges for out of warranty Macbook Airs, but this one has dents in the corners from previous owners, although it is in good condition overall. The Apple store is very far from me, is it still worth my time to bring it in or is that automatically considered user damage?
Thanks!
RIP STEVE!Maybe, but not conclusively. Try it again, but for security I would make a backup if you don't already have one.
If the drive cannot be repaired this way, then you should erase the drive and reinstall OS X:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on
the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button and set the Zero
Data option to one-pass. Click on the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If this doesn't work then the drive should be replaced. -
15" (late 2008) macbook pro and 30" cinema display??
Im looking to buy one of the new macbook pros, and I know that you need the$100 dual link cable to get it to work with the older apple displays.
With that cable what is the max resolution I will get on a 30" cinema display?
The max res for the 30" is 2560 x 1600 pixels, but I have heard that you may not be able to get real high rez with the 15"
anyone know, I would appreciate the help....
-billYou'll get 2560 x 1600 - that's the max resolution of the display, and it's the max resolution of dual-link DVI (at least, at the standard refresh rate).
-
My late 2008 macbook aluminum wont boot or install
macbook wont boot and when i try to install of cd it fails ive restored and erased my drive then tried agian with no luck. I tried a different osx install cd and the same thing occured i waited an hour and it failed. tried calling apple support and the 60 dollars for phone support that i did by my self just to have fail anyway. I need this macbook for school work and editing projects
Welcome to the Apple discussions.
Your description of the symptoms/issue is a little vague, but lets start with the Apple hardware test. Reboot holding the D key down. If the Apple hardware test starts up, choose the extended test. If it doesn't start up, then insert the first OS X disk that came with the system (should say AHT Version x.x in small print on the label) and reboot holding the alt/option key down. Choose the Apple hardware test. If you have either of the TechTool programs, they can do similar testing. Does that identify any hardware issues?
If the AHT doesn't call out any issues, it could be a hard drive that's going/gone bad. When you boot from an OS X disk, if you run Disk Utility and repair the hard drive, what happens? When you erased the hard drive, did you do a secure erase, writing zero's to the disk? -
Tried to upgrade my i-pad to a ios7, i have now ended up wth a white square on my i-pad which states CONDITIONS, this is on top of a grey back ground which is titled FIND MY I-PAD IN IOS7, this is were i cannot get any further, even though i press agree on the conditions
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
-
I have just purchased a second hand ipod touch 4. The previous owners details are still in it, so for example when I try to update the facebook app it asks me for the previous owners password, and shows the previous owners email address. How do I change it all to my details? I have already synced it with itunes and all of my music is now in it, and it's also renamed on the itunes page when I attach the ipod to my PC. I've also been in to the 'info' page, 'Advanced' and then 'Replace information on this ipod with mail accounts from this computer' then finally 'apply', but it still has the other persons ID.
I've answered my own question! I now understand that you can't use apps as they are always going to be linked to the original owner. I've since deleted the app and downloaded it again, and all is now well!
-
After updating to iOS 5 today, i was able to get my iphone working with virtually no problem. The issue i am having is that after i finished with my phone, i tryied to do the same with my ipad. Everytime it is plugged into itunes, it keeps saying it needs to restore over and over again. I have done this about 20 times today and have lost it. I can't sync anything with it, especially my music or calendars. Anyone know of a solution?
This will fix it
http://support.apple.com/kb/HT1212 -
I have forgotten my login password for my macbook air and i don't know what to do?
Okay, so I have forgotten my Login password and i have no idea what to do?
OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.
Maybe you are looking for
-
Crystal Report Taking too much time to load
Dear Support team, Every time I open an existing Crystal Report, it is taking me about 5 minutes to load (Even if its a new and Blank report). Also after one report has loaded for the first time, Loading further reports would take the same long time.
-
How do you delete the email addresses in the BEx Broadcast wizard(send..F4)
Hi In the BEx Broadcast wizard, you can enter email addresses manually or then you can see them on the drop down list(previously used email ids). Question: you can create any email address and send to these but how do you delete those ones you have a
-
Problems reading my backed up data on hard drive after using Time Machine
I have a MacBookPro and had to take it in for servicing. I backed up all my data using Time machine. They had to replace my battery, hard drive, and logic board, basically wiping my slate clean. When I got my computer back and plugged in my hard driv
-
Itunes is not recognizing that my ipod is plugged in so I am unable to sync my device. What an I do to get itunes to notice my device is plugged in?
-
MarshalException: Missing end tag for body or Envelop
Hi, I am new at this, pls advise. I have been trying to code a 'hello world' that returns a string, as below. //================== package simple; public class HelloWorld{ public String sayHello() { return "hello"; //=================== and my buil.x