I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?
I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.
Similar Messages
-
I have F.F 3.6 and windows 7.: 1) When i want to buy a airplane ticket and want to select 2 adults or 2 children, the draw down select, does not work in any websides,? WHY?. 2) Have FF any problems with SKYPE
== This happened ==
Not sure how often
== After innstalling windows 7As a suggestion I'd put the Text_io segments into their own begin - exception - end sub-blocks within the main code. This way if Text_io does raise an exception you can catch it earlier as it may be able to recover - That is if it is a text_io exception.
Other than that you;ll have to step through in Debug. -
The manual mode to transfer music to my iTune from my iPhone does not work as described. When I click on Manually manage... it displays the warning message that all music on my iPhone will be erased and replaced by iTune music.
How can I transfer my music to a second computer iTune?
Thanks,See this user tip
Syncing iPhone to a "New" Computer or replacing a "crashed" Hard Drive -
My left arrow does not work on my macbook pro(model A1226).
I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, & tested all other keys with "keyboard viewer" (all other keys work except for the arrow).
In addition, I have gone thru all the recommended checks with universal access and have booted from snow leopard dvd and the left arrow still does not work.
I have tried using the left arrow key in all of applications I use such as: excel, ms word, address book, calendar, iphoto, terminal, & highlighting an icon and using the arrows to move to another selected icon.
Here is the kicker! In addition, I purchased a logitech solar bluetooth keyboard and the arrows work fine with my ipad but do not work when paired with the macbook pro. All other keys work fine on the macbook pro using the bluetooth keyboard.
I believe this says that the problem is not in my macbook pro keyboard. So where can it be?
Can anyone think of any other rabbit holes I can search?
thanks and regards
vats3I would also like to add that I've reverted the two cd drive and hard drive mods I did and the laptop is back to factory hardware and there is 0 corrosion or mold visible.
-
How does one do a two way contacts sync between an iphone and outlook? Most of the community has answered as this to be "always so", but it does not work! Changes made on outlook get done in my iPhone, but it does not work the other way around!
Close the tab the web page is loaded in (command - W).
-
My Iphone 3GS has just restored and I completed the things on the Iphone and then it says no sim card activated and I tried everything it said if it does not work, but nothing seems to work?
All iPhones require a SIM for activation.
Insert a SIM in the iPhone. -
Intermittently iphone 6 and 6 plus is wifi connected but internet does not work.
Hi,
I have an issue where intermittently iphone 6 and 6 plus is wifi connected but internet does not work. iMessage works though. Toggling the wifi setting clears
the issue temporarily but it occurs again. Running iOS 8.3 now. This was the case on iOS 8.1 and 8.2 as well.
I have tried the typical troubleshooting steps (reboot/reset network settings/disabling location services for wifi/upgrade/etc)
My router is an EA9200 router with 2.4 Ghz and 5 Ghz. It is configured with all bands with the same name.
All other devices in my house works perfectly fine and has no disconnects (ipad/macbook air/tv's/receivers)
My thought is that iphone 6 cannot handle well the moving around between bands.
Any thoughts or suggestions would be greatly appreciated.
Thanks,
DavidHave you tried to reboot your router by turning off the power (you may have to unplug it from the power source), then waiting about 30 seconds, then turning it back on? This seems to solve a lot of problems.
-
Hi,
I have just got my first apple device, iphone 3G S. After iserting sim it does not work, cant go beyond first screen. How to activate it? I am in Delhi, India.Any suggestions.
Satishwould be best if you can download the guide here
http://support.apple.com/manuals/#iphone -
Using Acrobat Pro X on windows 7. The replace pages feature does not work. Is this a known issue? Is there a fix?
Hi Todd,
I haven't heard other reports of this (though there was an issue quite some time ago where deleting pages on this combination of Acrobat/OS was challenging).
Can you please tell me what happens when you try to replace pages? Do you get an error message? Are you able to manipulate pages otherwise (delete, extract, and so on)? Is this issue unique to one file, or does it happen with all PDF files?
I look forward to hearing back from you.
Best,
Sara -
I downloaded CC 2014 and now my image proseccer on 2 computers does not work on either
I downloaded CC 2014 and now my image proseccer on 2 computers does not work on either
You may try these options:
Credit Kappy.
Ciao. -
How do you lock the menu bar so it does not disappear as the cursor is moved around?
How do you lock the menu bar so it does not disappear as the cursor is moved?
No.... you need a different cover
-
I have just upgraded to Lion and now my VPN connection does not work properly. It was working fine when I was using Leopard. The VPN is My Private Network and we use it to link to BBC iPlayer when abroad. It will actually connect to the VPN site and shows a UK IP address, but then when we try to load an iPlayer programme we get the message from the BBC that we are not in the country and, therefore, cannot access the site. Any suggestions?
Have a look at System Preferences, Accessibility, VoiceOver.
(Command - F5).
charlie -
How do I add album artwork in itunes 11.1.3.8? Copy and paste to artwork box on bottom right in get info screen does not work.
You can only join tracks when importing from a CD and likewise, the Options button is also only visible when importing from CD.
When the CD is in the drive and showing in iTunes, you will see Options, CD Info and Import CD choices. If you select Options, the Join CD Tracks option only appears when you have two or more adjacent tracks selected. See the screenshots below:
and -
I just dwnld vr 6 and now my scroll button on my acer does not work!
i have a acer laptop with the scroll button on my mouse pad.
since downloading version 6 of foxfire, the button does not work!
I have to move the cursor to the right side bar too scroll up and down!Did you try to turn on the ringer on the lateral switch, right on top of the volume switch? You did not mention on your post.
-
My software update does not work: the icon jams and then times out, although web is online. How to resolve??
Snow Leopard DVD:
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
When you've installed SL it will be 10.6.3. You need to update that to 10.6.8 with the combo installer from http://support.apple.com/kb/DL1399 - that gives you access to the Mac App store.
Lion is only available by phone also - same number and they'll give you a download code to use in the Mac App Store.
If you're going to Mountain Lion you don't need to install Lion first - you can do it straight from Snow Leopard 10.6.8.
Specifications;
Snow Leopard 10.6.x:
Lion 10.7.x;
Mountain Lion 10.8.x:
As for Lion, but also must be one of these groups;
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminium, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
<sorry to repeat, guys, but following links isn't always a given with OPs>
Maybe you are looking for
-
My iphone is no longer being recognized on itunes
After the latest itunes update my iPhone 4 is not recognized by iTunes at all (completely unable to sync). Message indicates compatibilty issues. I have Windows 7 64 bit.
-
IPhone: Sending a picture as an attachment, not embedded within the email?
Hello Community, Does anyone have a suggestion as to how to e-mail a picture from your iPhone, as an attachment? NOT embedded within the e-mail....? My wife's e-mail client (school teacher) will not allow her to receive/view emails that have pictures
-
Change File Type association to match creator?
I've searched this and other forums, but not seen a similar question. Is there a way to make the Finder open a given file type automatically in its CREATOR application, rather than the associated File Type application? I have hundreds of files create
-
I am trying to install adobe photoshop and dreamweaver CS4 on my windows xp. But both of them during the loading of setup file returns the following error: "Crtical errors were found in the setup. check the setup log file for details." I checked the
-
What happened to "me View" and "personalize"?
I've just spent 30 minutes trying to figure out what happened to my very carefully constructed and personalized "My View" page. I'm either exceptionally dense this morning or it has vanished. I had spent a good amount of time on setting up a few "wat