I have completely disabled my iphone 3gs. It says "Iphone is diabled connect to itunes", but when I connect it to itunes, itunes says "could not connect because it is locked with a passcode you must enter your passcode on the iphone before it can be used.
My iphone 3gs will no longer let me try passcodes and it only says "Iphone is disabled connect to itunes" well, when I connect it to my laptop, itunes says "could not connect to phone because it is locked with a passcode. you must enter your passcode on the iPhone before it can be used with iTunes" Please help!!! I have tried resetting it and all the tricks I know. Nothing works. Thanks
You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808
Similar Messages
-
I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
"itunes could not connect to the ipod becasue it is locked with a passcode. You must enter your passcose on the ipod before it can be used" BUT i cant unlock it and i dont have the original itunes that is was hooked up with before either. HELP! It wont let me restore because it is locked. I cannot unlock it. I have tried everything online. nothing works.
Place the iPod in recovery mode and then restore the iPod to factory defaults/new iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
please reply me
You've entered your passcode on your phone to unlock it ? If you can't remember your passcode then follow the instructions on this page : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled.
-
after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
I have a 3rd generation i-pod touch ......cant get the slider to slide to put the passcode in .....the message says (i-tunes cant connect to the i-pod because it locked with a passcode ,you must enter your passcode on it before it can be used.)...... I cant slide the slider to put the passcode in what to do?
iOS: Unable to update or restore
-
itunes could not command to the iphone because it is locked with a password. You must enter your password on the iphone before it can be used with itunes
Did you try entering your passcode on the phone?
-
itunes could not connect to the iphone because it is locked with a passcode...
I hit this problem when updating my iPhone. I was about to put it in recovery mode (http://support.apple.com/kb/HT1808) and restore it but first I tried updating iTunes. Suddenly the phone sprang back into life!
-
PPlease pleas help me
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
please someone tell me what to do i have no idea where to put in the passcode let alone know what it is! and i need it because i need to sync all my contacts and apps and everything onto this new iphone
You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808
-
I cant open my iphone, its showing that ( iphone is dsabled, connect to itunes) when i connect to itunes its showing message on computer screen that ( itunes could not connect to the iphone, because it is loked with passcode. you must enter your passcode on your iphone to connect with itunes.
appreciatedPlace the iPod in recovery mode and then restore the iPod to factory defaults/new iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
I am trying to restore my son's iPod Touch 4th generation. I went about 20 minutes into the recovery process and got the error message, iTunes could not connect to iPod because it is locked with a passcode you must enter your passcode on iPod before it can be used with iTunes. The whole problem started with my son putting in a password that he has now forgotten. How do I get passed this?
its the 1st time ive heared of this
can u link it to an computer to add music?
if so you should be able to restore it
connect to itunes under the devices tab click on the ipod now click summary on the top
on the page you should see and check for update's or update tab
below that there should be an restore tab just click on the restore tab
NOTE RESTOREING WILL DELETE EVERYTHING YOU ADDED TO THE IPOD AND IT WILL BE BACK TO FACTORY SETTINGS -
My Ipod Touch is disabled and when I connect to Itunes to recover it, it states that itiTunes could not connect to the iPod touch “iPod touch” because it is locked with a passcode. You must enter your passcode on the iPod touch before it can recover.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
I am trying to use Itunes to move my data from my iphone 4s that was backed up on my Macbook Pro. I keep getting an error code backing up from ITunes to new Iphone 5s:iTunes could not back up the iPhone “Karen’s iPhone” because it is locked with a passcode. You must enter your passcode on the iPhone before it can be backed up. On the Iphone it keeps telling me to add another network. I have put our home network on the Iphone. When I put the passcode in the phone does not give me enough time to put my Apple ID password in and it shuts off. Help!
<Email Edited by Host>FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
I got the message copied below in iTunes but I still need to keep my pics and videos. Passcode has been wrongly entered 100 times by my little chiled. Is it possible to still keep the data?
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."PHONE LOCKED
If your phone is locked because you have incorrectly entered the unlock passcode too many times then follow the steps in this article http://support.apple.com/kb/ht1212
Maybe you are looking for
-
Configure HS talk to mysql through ODBC
Hello Running 10g rel2 on Linux 64bit. Need to dblink to mysql 5. Configured: /etc/odbc.ini [myodbc] Driver = /usr/lib64/libmyodbc.so Description = MyODBC 2.50 Driver DSN SERVER = 209.71.254.40 PORT = 3306 USER = posman Password = posman Database = p
-
Please advice on how to remain the font in SAP
Hi, Please advice on how to remain the font in SAP as Arial monospaced instead of its auto change to Chinese character. At the same time, pls advice the correct forum i should went as this is related to the Basis and i could not find out Basis Forum.
-
InDesign Not seeing Packaged Changes
We're having an intermittent problem with InDesign not seeing changes made from an editors returned package. Version: InDesign CS3 5.0.4 InCopy CS3 5.0.4 . InDesign file is on server . Exported InCopy files (.incx) is in a different path on same serv
-
Q10 SMS Notification failed after update 10.2.1.3062
Hi, I performed a small 31MB update to 10.2.1.3062 on Fido (Rogers). SMS notifications stopped - no LED, audible, Vibrate or spark. Other notifications are fine, performed battery pulls, hub reboots, no luck. SMS shows up in the hub with no notificat
-
Notice when new shortdump in st22
Hi, we are getting shortdumps when table tsp01 is getting updated. As usual when I ask the users abput what they have done when the error occured they tell me they don´t remember ´cuase that was yesterday. Is there any chance to receive a notice when