I have created a slide show for a funeral buts it is taking too long to transfer to sub (like 24 hrs  ). Is this normal or should I be doing this another way ?

I have created a slide show for a funeral buts it is taking too long to transfer to sub (like 24 hrs  ). Is this normal or should I be doing this another way ?

Not the only one. Though I have not retryed my installation. Here is what happen to me and please verify if you had the same (sounds like it).
1. Installed 10.8.4 on top of 10.8.3 and install went fine.
2. I have installed a Niffy Drive (though no SD in it) ... but did not realize potential problem you suggest.
3. its a MBPr
4. Boot took for every (it 40 seconds from after I logedin to system screen on 10.8.3) but after (ie on 10.8.4) took forever 10-15 minutes with a cursor in the upper left on a white/gray screen.
5. I reinstalled to 10.8.3 and all works as before
6. But sounds like after removing niffy dirve I should reinstall??? Ie the problem I described was the same as yours.

Similar Messages

  • Please help!!  I have an audio issue and am creating a slide show for a funeral.  I need a quick answer...

    I have created an itunes playlist to use with a slideshow in iDVD.  However, there s an instrumental that is being inserted that I did not put there.  Why is that and how do I get it to stop?

    Hi
    Have no idea on WHY but what I would do.
    • in iTunes - Burn out PlayList as an Audio-CD .aiff (no .mp3)
    • Use the files on this CD in Your SlideShow projects
    I create my SlideShows in iMovie HD6 or FinalCut - never iMovie'08 or 09 or 11 as result is less than I accepts (they discard every second line when exporting to iDVD)
    Yours Bengt W

  • I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation.

    I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation.  Try to export to an external HD attached, all help would be gratefully received 

    Have you ever successfully saved anything to that external drive? My first two thoughts are that the drive isn't formatted for the Mac or that you don't have rights to save to the drive.

  • I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down

    Elements 10 was deactivated on desktop and installed on new laptop.  Have on
    y used it for photo editing until yesterday. Created a slide show with music but every time I try to burn to cd or move it to hard drive after about 15 sec, it says windows has encountered a problem with this program and must shut down.
    I Also can't sign in to adobe with the program. It simply spins and I had to force close the program.
    help!?

    I am using photoshop Elements 10 under the create tab...slide show.
    Used it on my desktop several times. Deactivated it and installed on new lap top about 5 months ago.  Had not used it other than for photo editing until today.
    I can also not login in thru the program. It simply spins and I finally had to force close the program
    Toni V. Sloan
    Sent from my iPad
    On Jun 27, 2014, at 7:03 PM, Chris Cox <[email protected]>
    I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down
    created by Chris Cox in Photoshop General Discussion - View the full discussion
    Photoshop doesn't do slideshows… What software are you using?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6504356#6504356
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Please help, slide show for a funeral in jepoardy

    I seem to be having trouble inporting scanned pictures from iphoto into imovie 08. This is my process.
    1. Scan the photos.
    2. Save as JPEG image into the pictures folder (Not the iphoto file, but pictures -My save as choices do not include iphoto).
    3. Do a drag and drop of picture from picture folder into opened iphoto program. I can now see them in iphoto and have placed them in a seperate iphoto album.
    4. When I choose pictures (right hand side button that looks like a camera) it shows me all my pictures EXCEPT any scanned ones. I have 6000 pictures in iphoto, but imovie only sees 4000 (2000 are scanned).
    5. When I try to do a drag and drop from iphoto directly into imovie, imovie tells me the pictures are not compatable.
    What am I doing wrong? My guess is something from the scanning aspect. Please help, the family just dropped the pictures off last night and the funeral is tomorrow.

    4. When I choose pictures (right hand side button that looks like a camera) it shows me all my pictures EXCEPT any scanned ones. I have 6000 pictures in iphoto, but imovie only sees 4000 (2000 are scanned).
    Sounds like the iPhoto album contents are not being thumbnailed. Try bypassing the thumbnails by dragging a photo file from either the "Picture" folder or the open iPhoto album and dropping it directly to your Project window. If this works then you know the problem is in the thumbnailing.
    If this works and you are in such a hurry, I would suggest you simply set your iMovie '08 Project Properties for the default photo/transition mode you want and then drag and drop all photos directly to the iMovie '08 project window and then rearrange/change them as needed.Thus you can get to work on your funeral slideshow immediately and put off trying to fix the thumbnail problem until you have the time to concentrate on it exclusively. (I.e., deal with one problem at a time.)

  • I would like to create a slide show and then burn to a DVD.  I may be interested in adding music.  Should I use iPhone, iMovie or a simple Powerpoint?

    I am going to be creating a slide show and then burning it to a couple of DVDs.  I have used PPT in the past for simple slide shows for speaking engagements, but I am interested in adding music to this slide show.  What is the best/easiest application to use?  iMovie, iPhoto or Powerpoint?
    Thanks!
    Mike

    burning it to a couple of DVDs
    Is it your intention to create video DVDS that can be played on TV sets via DVD players?  If so you'll need a video DVD authoring application like iDVD.
    Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  For iPhoto 9.4.3 and earlier select Size = Medium or Large. For iPhoto 9.5 and later selct 480p.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago. 
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    OT

  • HT1364 Would like to use a downloaded song as music for a slide show for a 25th Wedding Anniversary video.  Can anyone help

    Greetings!! I'm trying to create a slide show for my 25th Anniversary for my husband.  I have downloaded the music from iTunes. but do not know how (or even IF thereis a way) to add it to DVD maker on my PC.  Can anyone help?  Anniversary celebration is Saturday, so time is short.
    THanks --sisfidy58

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • Show end of label text when String is too long

    I have a JLabel with a string in it, but the string is too long for the label, and only the first part of the string is visible.
    How can I make the label show the end of the string?

    I use the field as a rollover helper. When the mouse rolls over a cell or column in a table, it shows the value in the textfield.
    Now, when the field gets a new value, it flickers because it first enters the string and shows it from the beginning and then scrolls to the end, causing a flicker.
    Is there any way I can get around this?

  • Why iPad2 is taking too long time for a software update?

    Hi, i have iPad2 with iOS 4.3, now I'd like to update to iOS 6.1.2, but it is taking too long time to update when i connect to iYunes.My internet speed is 15mbps.I am unable to understand the problem.Please help me

    Hi, i have iPad2 with iOS 4.3, now I'd like to update to iOS 6.1.2, but it is taking too long time to update when i connect to iYunes.My internet speed is 15mbps.I am unable to understand the problem.Please help me

  • I have just purchased this on the apps store but it is taking very long to download. Is this normal

    I have just purchased lion  on the apps store but it is taking very long to download. Is this normal

    Probably. It's a very large download and Apple's servers are undoubtedly being hammered by everyone else also wanting to get Lion on the first day.
    Regards.

  • I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

  • Newbie Here - How to Create a Slide Show in CS5?

    I am using Windows 7 and I am familiar with PSElements 8 where creating a slide show is easy.  I just want to create a slide show in CS5 (in Bridge??  View>Slideshow Options?) using vacation photos from several folders, and I want to order them manually.
    First, I can't figure out how to display more than one folder in the Content panel in Bridge.  Second, I can't figure out how to create and intersperse "blank" slides with text.   Third (and I haven't even gotten this far yet), how do I save the slide show and burn a VCD?  This was all so easy and intuitive in PSE8, I can't believe it seems nearly impossible in CS5! 
    As an alternative, should I simply re-save the photos as JPEGs (they are PSDs now), export them to a Desktop folder, open them in PSE8 and create the slide show there instead?   Thanks for any help and suggestions!

    I am using Windows 7 and I am
    familiar with PSElements 8 where creating a slide show is easy.  I just
    want to create a slide show in CS5 (in Bridge??  View>Slideshow
    Options?) using vacation photos from several folders, and I want to
    order them manually.
    First, I can't figure out how to
    display more than one folder in the Content panel in Bridge.  Second, I
    can't figure out how to create and intersperse "blank" slides with
    text.   Third (and I haven't even gotten this far yet), how do I save
    the slide show and burn a VCD?  This was all so easy and intuitive in
    PSE8, I can't believe it seems nearly impossible in CS5! 
    As
    an alternative, should I simply re-save the photos as JPEGs (they are
    PSDs now), export them to a Desktop folder, open them in PSE8 and create
    the slide show there instead?   Thanks for any help and suggestions!
    1) Bridge has a new feature (can't think of the term at the moment) but it works like instancing or virtual copies. Select all of the photo's that you want and place them in the "collection" (Ah I knew I would think of it) Move to another folder and move them into the same collection and so on. These are virtual copies in that they don't really exist, but are a link to the original images. You then can use the collection for the slide show.
    2) Just create a page same size as your photo's in photoshop with what ever color background and put your text on it.
    3A)The slide show can be exported as a pdf or swf. Windows can then copy the file to a cd. If you choose swf, you may need to alter the html file (I assume it generates one, if not it isn't har to create one) The html file would help the web browser determine the correct size to display at. If you have flash, it can be used to create a html file as well.
    3B)If you would like the slide show to be displayed on a tv screen, then your cd/dvd will need to use a format that your dvd player can play, mp2 is the standard, but some can display jpg's, some are blue ray, etc. For exporting into the correct video format, then one of the following can be used. After Effects, Premeire pro, Encore, Photoshop (If you have quicktime installed and you are using one of the formats that quicktime supports like mp4)
    If you have quicktime installed, paying the 20 bucks may be worth it as it will allow you to take your jpg images and generate an animation file as avi or mov. But can save as mp4 as well.
    4) In Bridge you can select all of the images and run image processor on them. This plug in is part of photoshop there fore it will be in the menu's under photoshop. It will let you specify the files size, format and any actions, etc. It will then place them all into a folder that you specify.

  • I created a slide show on work computer. Placed photos and movies in Media Browser. Want to use another computer (laptop) to give presentation. Do I need to copy media browser to laptop or are pictures and movies embedded in slide show and can go anywhere

    I created a slide show on my work computer and placed many photos and movies in my work computer's Media Browser. Want to use another computer (laptop) to give the presentation and therefore change location of slide show. Do I need to copy the media browser to the laptop or once the pictures and movies are embedded in the original slide show, can I take it anywhere and not worry about the media browser?
    I also want to optimize a movie for Keynote, so it's not too large a file. Please help.

    Graphic, sound and video files are copied into the Keynote file, but make sure Keynote > Preferences - include sound and movies check box is ticked.
    If you have added additional fonts they will need be changed to reflect what is on the destination machine.
    If the other machine has a different Keynote version, ensure the same transitions and effects are available.

  • How do I create a slide show in Photoshop CS5.1?

    In older versions of Photoshop, you could create slide shows for online viewiing?  I can't find a way to do this in version cs5.1.  Any suggestions?

    Your talking about Automate>Web Photo Gallery?
    What operating system are you using?
    Have you tried the Output module in Bridge?
    Bridge Help | Create web galleries and PDFs

  • How can I change the order of photos in iPhoto so I can create the slide show I want?

    How to change the order of photos in iPhoto on my iPad, so I can create the slide show I want.

    Here's what I did to generate a slide show with Ken Burns effect on the iPad...with the exact same slide order I created on the iMac.  I have iOS 5.5 and iPhoto App on New iPad, and iPhoto 11 on iMac.
    In iPhoto for the Mac, create a new Album and give it the name of your Slide Show. Drag or import the photos you want into the album.  Rearrange the order of the album photos as desired. Do this by selecting Manual Sort under View/Sort Photos or simply start dragging thumbnails to the places you want them (the sort method will automatically change to Manual). 
    When you have the order you want, shut down iPhoto on the Mac to make sure iPhoto's database gets updated with the new photos and their order. 
    Restart iPhoto and go to File/Export on the top menu.  Select File Export at the top left of the Export window. Set JPEG quality to Max, Size to Full Size, and File Name to Album Name and Number.  Set Subfolder Format to None.
    Click Export to bring up what looks like the Finder.  Create an empty folder on your hard drive under Pictures and give it the name of your slide show. Click on the new folder and then click OK at the bottom right of the Finder-like window.  The new folder will contain JPEG files with file names in the form, Album Name - 001.jpeg, Album Name - 002.jpeg, etc.  There will also be an iPOD Photo Cache folder.  Click at the top of the Name column to order files by file name.  001 will be your first slide, 002 your second, etc.
    Now start up iTunes. You are going to force the Mac to sync these new photos with the iPad.  Click on your iPad device in the list at the left.  Now click on the Photo button at top right. Make sure the Sync Photos check box at top is checked, then select Choose Folder... from the list at right.  In the Finder-like window that opens, select the folder where your slides are.  Make sure that All Folders is checked, then select Open at the bottom right.
    Now click Sync at bottom right.  The slides will be copied to your iPad.  Both the Photos app and the iPhoto app will properly handle the slide order, and the Ken Burns effect is available using the iPhoto app.
    I ran across this problem in preparing a Ken Burns slide show for a wedding.  Drove me nuts for a week why the order changes when syncing an iPhoto album from iMac to iPad.  But this worked and gave me several options.  I plan to use the digital AV adapter for iPad and show slides on a large screen TV using HDMI connection from iPad to TV.  TV essentially acts as an external monitor for the iPad.
    Hope this helps!

Maybe you are looking for