I have created an iPhone app using xCode and am now ready to publish it. Do I have to sign up to the $99/yr program in order to get a certificate?
I have created an iPhone app using xCode and am now ready to publish it. Do I have to sign up to the $99/yr program in order to get a certificate? I keep getting the error message: CodeSign Error: code signing is required...although the app tests fine on the simulator. Does this mean that I need to pay the $99 to create the app or do you only need to pay if you want it published on iTunes?
Any advice will be gratefully received.
App Store Resource Center - Apple Developer
Similar Messages
-
i lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now.. im wonderin if ist safe coz all my emails are there and all personal info..i hope someone could answer me..i reported to the police the ist step..coz when it happened ..policemen are there..then i went to the nearest MAC center and tried to track it..but its offline..so they asked me if i want to remote lock it..then i did...which i think the mcreason why i cant track my phone beacause its locked?? or not until they connect to wifi or 3g but its unabling them because i locked it..?
but when i do remote wipe ..it will erase everything in there and i cant track down the phone anyomore?
-
Hello i have reset my iphone 4 .3.3 and till now not start again i have the apple on the screen and nothing else what i want to do thank you
Try resetting the device by pressing the Home and Sleep/Wake button for several seconds, the device should then boot up.
-
I have created an iMovie file and have created an iDVD menu file. I am now ready to burn a DVD. But my superdirve is broken. If I put my files on a mac without iMovie or iDVD, can I still burn my DVD with Toast 11?
no need for Toast ..
tell iDVD to create a disk-image
transfer dmg to othe Mac
launch the Disk Utility, burn that dmg ....... -
i have bought my Iphone 4s from USA and right now i am in India. How can i repair my phone in INDIA. when i contacted the image store they said, they will not repair it. friends can you suggest any possible solution
Because an iPhone warranty is only good in the country of purchase. You will have to take it back to the USA or send it to someone there to have them take it to an Apple store.
-
Trying to create first iPhone app, use Interface Builder or Xcode first?
I'm trying to create my first iPhone App, do I start with Interface Builder or Xcode first? And how do I link the two together?
It's not really that simple -- you'll be working with both. Interface Builder is used to design the GUI (graphical user interface, which consists of the windows and buttons and text fields and so forth, the parts of the application that your user interacts with). Xcode, on the other hand, is used to write the code that tells that GUI what it's supposed to do, and how to do it. So, to answer your question as best I can -- generally, I would imagine you would want to start by creating the basic form of your GUI in Interface Builder and then start coding where appropriate in Xcode, then you'll move back and forth between the two (Xcode and Interface Builder) as needed.
If you're new to programming and want to start with iPhone apps, I recommend picking up a book on the topic (Apress publishing has a book called "Beginning iPhone 3 Development: Exploring the iPhone SDK" that is a good one, and don't forget to take advantage of Apple's iOS Dev Center, which has lots of good documentation on most any topic that will be helpful in supplementing the information in the book you buy -- click [here|http://developer.apple.com/iphone/index.action] to go there).
Keep in mind, however, that trying to learn to program iPhone apps will be difficult (to say the least) if you don't already know Objective-C, and the Apress book I recommended above will not be easy to follow without understanding Objective-C first. Objective-C an object-oriented extension of C, and it is the programming language that is used to develop iOS apps (apps for the iPhone, iPod touch, or iPad). I would definitely recommend learning Objective-C on the Mac before jumping in to iPhone development in specific. Apress has another book called "Learn Objective-C on the Mac" that I would recommend for this.
Furthermore, since Objective-C is an extension of C, you won't have an easy time learning it without a prior understanding of the C programming language. Again, Apress has a book for this, called "Learn C on the Mac."
Put simply, learning to program for the iPhone is not something that comes overnight -- it's a step-by-step process that takes patience, and you have to be willing to go through these steps if you want to learn to program properly for the iPhone.
Step 1 -- learn the C programming language
Step 2 -- learn the Objective-C programming language
Step 3 -- apply your knowledge to developing for iOS (iPhone's operating system) with the Cocoa Touch framework
Anyways, that's just my advice -- I definitely recommend taking the time to do it right and not jumping straight into the deep end, but in the end only you know what works best for you. Also, like I said, I definitely think investing in a book on the subject is worth the time and money, so let me know if you want any other recommendations for books beyond the ones listed above.
Hope this was helpful to you, and best of luck with your journey toward programming for iOS. -
I have created a Flex App with out a Server now I need one
So I'm new to Flex and didn't think the project needed a
server at first (poor planning on my part) now I'll need one. I
have alot built and would like to just conevert the app if I can.
The project has been sourced in to Subversion, I would like not to
have to rebuild the repository.
Thanks for the helpOK, so I think what you're saying is that you have developed
locally, which is good, and are using java objects as your back end
solution - I'll just state that Java is the *only* method of data
transfer that I haven't used (I use ColdFusion, XML, WEb Services
mostly), so at some stage I may not be able to help you.
Still, lets see how far we get. So, you can deploy your SWF
file to any web server, and browse to it with your browser. The
output in the /bin directory will include the SWF (usually the name
of the project) and a html wrapper file.
Is the Flex app actually rendering (i.e., your containers)
before you get the error? (I'm trying to determine if the problem
is the data transfer or the flex app proper)??
David -
Does anyone have an answer? I can't get apple support. I have files that I need that I can't open because I get an error that there is a new version of numbers, but I have already downloaded it.
Mrs. Pete,
Please see this post:
https://discussions.apple.com/message/25041300#25041300 -
Adding search to Dashcode (converted to a native iPhone app using webview)
I'm developing an iPhone app using Dashcode and would like to add Search capabilities (e.g search through all the content in this app). Does anyone know how to add this using Dashcode? I'm converting the app to a native iPhone app using webview in Xcode. Just need a button with a search field and the output to be displayed somewhere....
Any tips/help or URL links much appreciated.
Thanks
JohnHello amybett,
I have bad news and good news. The bad news is that your printer is not Airprint/ePrint capable. However, the good news is that with the HP ePrint Home and Biz iPhone app it does not need to be Airprint/Eprint capable, as long as it is connected to the same network as your phone.
Here are the steps you will want to take to print something:
1. Setup the app by completing the email registration and entering the code (which I believe you have).
2. Select the item you wish to print using the menu in the app (Photo Albums, Saved Files, Web Browser, etc.).
3. Once you select the item you should see the item and a large "Print" button under it.
4. If the printer you want to print to is not listed above the "Print" button, select the icon on the right (wrench/computer) and select the printer you wish to use (along with other settings).
5. Tap on the "Back" button in the top left corner, then tap "Done" (blue button in the top right corner), and then tap the "Print" button to print your item.
Let me know if you are still having trouble after following the guide above.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution -
Where can I find out which iphone apps use data?
Hi
My iphone has wi-fi 24/7, yet my data usage is over the limit.
Where can I find a listing of which iphone apps use data and not wi-fi?
Your help will be greatly appreciated.If your phone is on wifi, then almost all apps will use it. The exceptions are those from your provider. For example, AT&T apps will always use their network. To determine if an app is using data, you need to install DataMan Pro. Even then, you will only get general info and on an hourly basis. Use the process of elimination to figure it out.
-
Creating an iPhone app? How?
I've been looking for weeks online for instructions on how to do this, but I can't find the information I'm looking for so I thought I'd post my question here.
I have an iPhone 3G and love it. I'm an author who would like to sell my ebook in the app store. I've downloaded the 3.0 SDK to my hard drive (but after installation, I can't find it) nor can I find any instructions on how to use it to create an app.
If anyone knows of an online resource you can recommend to help me, I'd gladly appreciate it. I'm completely in the dark as to how to do this and Apple's website isn't as helpful as I had hoped.Hi Bob,
Thanks for the info.
So basically I can't create any Iphone apps with what looks like the single edition I have.
I'm trying to create some apps for the Newstand so I've already created a Ipad version but was also hopeing to have a Iphone version too
It says you can create unlimited Ipad apps with the single edition but would that include multiple editions of a magazine rather than an update of an existing one?
Spence -
I setup two iphones on "Find My Iphone App" Using the same apple id on each phone. Now the app finds only the phone I setup first. Do I need to use two different apple ids? If your answer is yes then how do I errase the setup in the second phone and assign a new id?
As TJBUSMC1973 states, and as I said earlier, the Find My iPhone app has nothing to do with your use of Find My iPhone. The app is just used if necessary to locate another iOS device from that particular iOS device. To see if both of your devices are being located in Find My iPhone, log into www.icloud.com and select Find My iPhone. Both of the devices should appear. If they do not, then go into whichever of the devices does not appear and make sure that Find My iPhone is activated. It has to be activated through iCloud, and for both to show on the same map, they both have to have the same iCloud ID.
-
How to create a simple app using the MVC approach?
Hello gurus i'm trying to learn the SAPUI5 and i'm trying to create a simple app using the MVC i created the app and trying to add a lable to the view but there is nothing appear when i run it the code for the HTML page
<!DOCTYPE HTML>
<html>
<head>
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<meta http-equiv='Content-Type' content='text/html;charset=UTF-8'/>
<script src="https://sapui5.hana.ondemand.com/resources/sap-ui-core.js"
id="sap-ui-bootstrap"
data-sap-ui-libs="sap.m"
data-sap-ui-theme="sap_bluecrystal">
</script>
<!-- only load the mobile lib "sap.m" and the "sap_mvi" theme -->
<script>
sap.ui.localResources("mytestapp");
var view = sap.ui.view({id:"idshell1", viewName:"mytestapp.shell", type:sap.ui.core.mvc.ViewType.JS});
view.placeAt("content");
</script>
</head>
<body class="sapUiBody" role="application">
<div id="content"></div>
</body>
</html>
the code for the view
sap.ui.jsview("mytestapp.shell", {
/** Specifies the Controller belonging to this View.
* In the case that it is not implemented, or that "null" is returned, this View does not have a Controller.
* @memberOf mytestapp.shell
getControllerName : function() {
return "mytestapp.shell";
/** Is initially called once after the Controller has been instantiated. It is the place where the UI is constructed.
* Since the Controller is given to this method, its event handlers can be attached right away.
* @memberOf mytestapp.shell
createContent : function(oController) {
var oLabel = new sap.ui.commons.Label("l1");
oLabel.setText("Test label");
oLabel.placeAt("content");
i dont know what is wrong or if i should use a container to display my controls
any help will be appreciated
thanks in advanceHi,
Instead of oLabel.placeAt("content"); use return oLabel;
so it will as below,
createContent : function(oController) {
var oLabel = new sap.ui.commons.Label("l1");
oLabel.setText("Test label");
return oLable;
Regards,
Chandra -
I bought iPhone 3GS(Used) recently and updated ios 6.1.3 my iPhone is taking blurry Pictures through basic default Cam app.Can anybody please let me know any solution for this?
Basic troubleshooting steps right out of the user guide are restart, reset, restore from backup, restore as new. If you've been through ALL the steps and you still have the problem, then you'll need to bring your phone to Apple for evaluation.
-
My phone got stolen and I don't have "find my iphone" app, I need a way to track it down
What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Maybe you are looking for
-
Header lost when saving as pdf form
I have created a form using formscentral, and added an image in the header. When I select File > Save as PDF form, the resulting file/form looks good EXCEPT my header doesn't appear. Any ideas what I'm doing wrong? Many Thanks Rachel
-
PI 7.1 Email Attachment binary file
Hi, I am trying to attach a binary (encrypted) file to a regular mapped email (receiver adapter) before sending it. It is similiar to attach pdf-files at the end of a mapping process. Is there no way to attach binary files other than writing an adapt
-
Cannot drop table (error ORA-00054)
I am trying to drop a table but get an "ORA-00054 Resource busy and acquire with NOWAIT specified". Previously I had created this table and run a join which I cancelled because it was taking too long and obviously not doing what I wanted. Now I can't
-
Hi, I have a scenario in which we have to pass details from Proxy and post it on a webservice. The web service will have repsonse which is just a single field and this along with an input field which we might have to store in the BPM so that we can p
-
Leopard MDC with Tiger Clients?
I'm well aware of the rule which states MDCs should be the same as, or no more than one version ahead of, the cleints. So far so good. Does this mean I can update the MDCs to 10.5.1 server whilst leaving clients on 10.4.11 for the time being? Trying