I have dead time after a transition on one of my slides and I can not get rid of it

I have a transition between slides and then once the transition occurs, there is dead blank space for 5 seconds and then the next slide comes in. I have tried everything to get rid of the dead space but I can not seem to resolve the issue. Anyone have any thoughts?
Thanks,
C

All of my transitions occur in the build inspector. None of them have been incorporated in to the slide inspector. My text moves in at a duration of 1.5 sec and then moves out at the same duration. And that is it. No delay on builds on the next slide. All of the slides are set up the same way. And I am working off of two monitors and there is a space that shows the next slide and it is completely blank, but I don't have a blank slide in the presentation. Thanks for any help you might have.
C

Similar Messages

When I go into iTunes on my Mac is recently takes over the entire screen and I can not get rid of it. Is there a setting I can change to have it work the old way?

When I go into iTunes (the latest update) now, it takes over the entire screen is difficult to remove. Is there a setting I can change in it to have it behave the old way?

I presume you are runnning iTunes on either an OS X 10.7 or OS X 10.8 system. Move the cursor to the very top of the screen so that the menu bar appears, then click the blue box with the arrows at the very right corner of the menu bar, or press Shift-Command-F. That will switch iTunes back to a normal window, which it should then remember for future launches.
Regards.

I have an unknown shared server in Finder. What is it and how can I get rid of it?

Hi,
I just noticed there is a shared server/ network listed in Finder, but I do not recognise it and cannot connect to it.
Could anybody tell me what it is and how I can remove it?
Thanks!
This is what it looks like:

If you have a networked printer, they sometimes have SD Card slots, USB thumbdrive slots, etc... and the printer offers to be a file server to share the contents of those removable camera storage devices.
It is possible your home WiFi router can also act as a printer server, or with a USB disk (or thumb drive) attached, a file server.
You could use a utility such as Bonjour Browser which will give you more information about the devices it sees on your home network
<http://www.macupdate.com/app/mac/13388/bonjour-browser>

All of a sudden I have all my bookmarks displayed on the left of the screen and I can't get rid of them. How do I get rid of this box?

All of a sudden I have a box on the left of my screen with all my bookmarks in it. I can't find a way to disable this, and I would like to.

You can toggle the Bookmarks Sidebar on/off with Ctrl+B
* View > sidebar > Bookmarks
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

I still have that stupid pacman sound effect playing and I can not get rid of it. I have researched this for weeks and weeks and have tried everything. I need a sure fire way to track this thing down and stop it.

Do not have cool previews, have deleted, cleaned, rebooted, removed everything according to all the online help, but still have this stupid sound.

Try running Firefox in [[Safe Mode]] and see if that helps!

After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I don't seem to have the "com.apple.garageband.plist" file that has been a common solution. Any suggestions?

After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I've read through several posts that all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist. Any solutions or suggestions?

Did you upgrade from SnowLeopard?
I can't get passed the complete installation
What exactly is happening? Is GarageBand trying to download over and over again?
all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist.
The property list stores your preferences, but also the settings from the last run of the application. If that file is corrupted in some way, you might see third behaviour.
You must have this file, for it will be recreated automatically, if it is missing, or you have a permissions problem with your user library.
Perhaps you did look in he wrong place.
in MacOS 10.7. or later the User Library is hidden. To find the Preferences Files use the Finder's "Go" menu:
Quit GarageBand, if it is running.
Click onto you Desktop to bring the Finder forward.
In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
Log off and on again (don't skip that step!). Retry GarageBand and see if it GarageBand is now downloading the missing content properly.
If that does not fix the problem, post back and explain in more detail what the download problem is.
Why did you "repurchase" GarageBand? If you already owned GarageBand '11, it should be unnecessary.
Regards
Léonie

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused.

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused. I can manually send and receive faxes but I can not do it through the computer.

Try deleting the printer, deleting the job queue and reinstalling the printer again.

My time capsule is blinking orange and I can not get it to stop. I have done a hard reset and unplugged it but it continues to blink orange. This all started because the time capsule stated it was delayed in backing up so I thought I would try to reset.

My time capsule stated that it was delayed in backing up so I decided to do a hard reset on the time capsule. Now I am getting a blinking orange light and I can not get it to go back to green. I have had to hard wire the modem into my computer for connection. I need some help please. Thank you.

Assuming it is not simply broken, a slowly flashing LED probably means the TC is not receiving an IP address from the modem. Make sure you power down your modem whenever you change what is connected to it.
Having to unplug the Ethernet cable from the TC and plugging it in to your Mac repeatedly so that you can communicate is tedious enough, but endeavor to add the power cycle exercise to that action.

I had a crash of the mac 10.4.11 after I restarted my comp the google toolbar vanished and i can not get it back it does not install ((( all my bookmarks are there

I had a google toolbar on my 3.6 firefox for at least one year . After my Mac crashed and I restarted everything it vanished and i can not get it back I tried to reinstall it does not work and when i go to add ons it tells me it is not available for 3.6 Firefox All my bookmarks re there (((

Yup, your question and Diane's answer helped me also. Tho' I had had problems before getting into the iTunes store I always managed to find a way. Today they had me blocked cold with the "Update to 10" advert no matter what I did. Other questioners are being told, incorrectly as it turns out, that they have to update their OS to accomodate iTunes 10 and upgrade to iTunes 10. I did the download which did not take up much more room on my crowded old hard drive and now I'm back in business.

I bought an audiobook in itunes on my pc and I can not get it to push to my iphones. Do I physically have to connect to itunes to get the audiobook on my iphone?

I bought an audiobook in itunes on my pc and I can not get it to push to my iphones. Do I physically have to connect to itunes to get the audiobook on my iphone?

Audiobooks are currently a one-time only download, so if you're asking whether you need to connect the iPhone to your computer's iTunes (if that is where you've downloaded it) in order to get the audiobook on it then yes, you will need to sync it the phone, you can't re-download it on the phone.

I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?

I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?

Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out.

I am using my time capsule to back up and I can not get the green light, what should I do

Hi everyone
I posted a quesiton yesterday and when I got up this morning the time machine / capsule (not sure of the difference) had unlocked itself!. The other problem persists and that is that the amber light continues to flash and I can not get the macbook to talk to the time thingy.
Obviously I am not very good at these things and I live in a country where I-systems knows about as much as I do!
Thank you
Gillian

So you have never actually used the airport utility.. you were almost there.
You posted this picture.
Screen+Shot+2013-03-15+at+13.20.55.png
Click edit button on that page.
Voila.. airport utility in all its manual setting glory.
Or install a decent utility.. 5.6.
This is not required but to my eyes.. it is much easier to understand and has more useful tool items than later versions.. which are made iOS pretty picture like.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

I have Nortons security suite under the old version the Idenity protection worked I kept all my passwords under this which used a master pasword I did not save passwords any were else and now can not get it to work supplying passwords for my l0gon site.

I have Norton's security suite under the old version the Idenity protection worked. I kept all my passwords under this which used a master pasword I did not save my passwords any were else and now can not get it to work supplying passwords for my logon site.

Symantec need to correct a mistake they made with their add-ons. They originally updated their add-ons after quite a delay to work with Firefox 4.0 as shown here - http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-4-compatibility-hotfix-is-now-available/td-p/428894
They made an error with the update in only listing it as compatible with Firefox 4.0, so they will not install on Firefox 4.0.1 and subsequent Firefox security updates. Symantec have indicated they will be releasing an update to correct their error soon, for details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788/page/12

HT4352 How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

You can't, you will need to get a new remote.

I have a toshiba lap top computer with vista and I can not get my iphone to connect all the way .. it says "connected with limited activity"?

I have a toshiba lap top computer with vista and I can not get my new iphone to connect all the way .... it says "connected with limited activity". which means I don't get on. Any help would be appreciated. Thanks.

Hi all,
Guess I understand what is going on as I'm also experiencing the problem.
Basically the issue is about the iPhone 4's personal hotspot.
I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
The hotspot works well on other laptop and I-devices, but not my toshiba...
Hope to get assistance here. Thanks

I have dead time after a transition on one of my slides and I can not get rid of it

Similar Messages

Maybe you are looking for