I have elements 10, the organizer wont stay open for more that a minute, i open it closes.

Hi all, I have elements 10 and the darn organizer will not stay open for more than a minute, which makes useing the program a pain in the butt. does anyone else have this problem and how did you fix it. Im running XP on an older machine in which the edit part works fine.HELP

Hold down your Shift key while launching the Organizer to get to the Catalog Manager. Highlight your catalog at the bottom of the window, and choose "Repair". Repeat, using "Optimize".
If that doesn't solve it, from the Catalog Manager, create a new catalog (with a different name).
Ken

Similar Messages

My Iphone 5 keeps restarting over and over. it wont stay on for more than a minute. how do I fix this?

My Iphone 5 keeps restarting over and over. it wont stay on for more than a minute. how do I fix this?

Contact Apple Support or an Apple Store if you have one near you. Your battery needs to run through the diagnostic test. You can also try to put the device into Recovery mode as well and rsetore the iOS software, and set up the device as new. Follow this article on Recovery Mode:
http://support.apple.com/kb/ht1808

I was mid facetime call and my phone turned off and wouldnt turn on until i plugged it in. then the date was wrong,it said no service, and wont let me turn wifi on. also it wont stay on for more than a few minutes at a time

i was mid facetime call and my phone turned off and wouldnt turn on until i plugged it in. then the date was wrong,it said no service, and wont let me turn wifi on. also it wont stay on for more than a few minutes at a time. Help?

Sounds like a hardware failure.
Make an appointment at the genius bar and take it in for them to look at. It will probably need to be replaced.

My iphoto quites unexpectedly everytime I open it and says closes while using the eOkaoFr.dylib plugin. Does anyone know how to fix this? iphoto won't stay open for more than 1 minute at a time.

My iphoto quites unexpectedly everytime I open it and says closes while using the eOkaoFr.dylib plugin. Does anyone know how to fix this? iphoto won't stay open for more than 1 minute at a time. Help anyone?

Is there a crash log? If so post the first 100 or so lines o fit
Do you know what the ofending plugin is? and where it came from?
LN

Staying Signed in for more that 1 minute!!

My problem is staying signed in to my computer for more that 1 minute. If I sign in and do not use my site for a while (more that 1-minute) I get signed out and I have to go through the sign stuff again. My computer will close down al together. How can I stay ssigned in while not using my computer aor a few minutes?????

Did it start not syncing after the iOS 4.2 update?

Hi I just try to update my iphone 5 to 7.1.2 and the bar update is freeze for more of 45 minutes?

Hi I just try to update my iphone 5 to 7.1.2 and the bar update is freeze for more of 45 minutes? At between 1/4 to 1/3 of the screen! What is ur sugestion to fix that? force to close?

Ok I find my solution on one other website....

Icons keep disappearing off the monitor when computer sleeps for more than 10 minutes

My new HP Pavilion I5-2300 keeps locking up when the computer rests for more than 10 minutes. When i go to wake up the computer the desktop background comes up on the monitor, but all of my icons are missing and no command prompts work from the keyboard. I have just been unplugging and then replugging the monitor from the power source and that seems to reboot the freeze, but i really don't want to have to do this every time it happens. Anybody experience anything similar? Am i missing an easy solution here? Thanks

Hi,
As you can see from the theory this alert could mean two things:
1. Too many powershell scripts are executed on agent simultaneously
2. There are scripts that takes much time to complete
First of all, you need to evaluate a script-based module (workflow). You need to find answers to following questions:
– What is the target for this script-based workflow?
– How many instances of this target class are exist on the affected computer?
– Does this script leveraging a cookdown concept?
– How long it take for script to complete?
Please go through the articles below for more details:
http://www.systemcentercentral.com/research-this-kb-power-shell-script-was-dropped/
In addition, here is a similar thread for your reference:
Threshold for SCOM 2012
https://social.technet.microsoft.com/Forums/systemcenter/en-US/00dc16c4-9858-459a-8c65-7d73ac8cc997/threshold-for-scom-2012
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Razr Maxx screen wont stay on for more then 3 seconds

So I got my droid razr maxx in today and this is the first smart phone i've ever owned. The screen keeps shutting off after 3 seconds and i have to press the power button to put the phone in idle and then press it again to bring the phone back in order to make the screen turn back on. Nothing else makes the screen turn back on but i can select everything on the screen as if it were on. I had to set up my entire account by quickly punching in my gmail account and password before the screen turned off on me and i had to go idle and come back. I had to do this straight through the setup phase of the phone. When i finally finished the setup i went into the settings and set the display setting to never turn the screen off. It didn't stop the screen from turning off. So i charged the phone to 100 percent from the 60 percent it came at. The screen still shuts off 3 seconds after i turn the phone on. Is it bricked ? Whats going on ?

Foon,
Good afternoon! Congratulations on your first smart phone! I would love to offer my assistance to ensure your experience is an enjoyable one. Ann154 asks a great question(thank you!). Is there a case, holster, etc covering up the proximity sensor? Even screen protectors have been know to degrade the ability of the sensor. If you determine that nothing is obstructing the sensor, I recommend a 'Hard Reset' to the device in order to return the phone to factory settings. It may be necessary, after the reset, to go over options to have the device replace either under the 14-day exchange period or under Motorola's warranty.
Please reply back so I and the community can assist further.
Thank you,
AdamE_VZW
Follow us on Twitter @VZWSupport

Router won't stay connected for more than 45 minutes

I have a BEFW11S4 v. 4 (firmware 1.52.02) wireless router that I've been using for years. Recently (i.e., within the past week), it has been dropping its internet connection about every 45 minutes. The network set-up is: an XP desktop connecting via an access point (Linksys WUSB11 v. 2) and a Vista laptop connecting via its internal wireless card. I also have a Vonage-supplied Linksys router running VoIP (RT31P2) that's connected to the wireless router. The cable modem is a Scientific Atlanta DPC2100 series.
The routers/modem are on a bookshelf in the middle of a wall all by themselves. There is a DECT 6.0 cordless phone across the room (as far away as possible from the router).
When the router is connected, everything works with no problems whatsoever. Then, after about 45 minutes, the connection drops from everything. After unplugging the wireless router for about 30 seconds then plugging it back in, it's good to go for another 45 minutes. I've tried changing the wireless channel with no luck. I've also cycled the entire system (*several* times. ugh!) The SSID is not "linksys." My internet provider did recently change to Comcast, but the problems I've been having don't align with the change in providers.
Some quirks that I've noticed is that the Vista laptop can see the network, but can't connect, saying it received no response from the router when I run the "Diagnose the problem" function. The XP machine responds in a similar manner; it has my network on the list, but just hangs when it tries to connect. Also, sometimes the VoIP router is affected (i.e., the phone line disconnects), but other times it's not.
I'm extremely frustrated at this point, and ready to chuck everything out the window. Does anyone have any idea what could be causing this type of problem?

Well if you are able to go online directly with the modem...connect modem>>>>route>>>>pc....if its a cable modem then reset the router for 30 secs in such a way that power light is blinking on the router.Now, power cycle the complete power cycle...ie., unplug the power cable from the modem & from the router...now plug in the power cable to the modem once all the lights are solid green you could plug in the power cable to the router....& you would be online

Droid X battery will not stay charged for more than 5 minutes. Help

My Droid X will not hold a charge for more than 5 min. 1 phone call and the phone shuts down.

bdsutton,
Thanks so much for your inquiry! There hasn't been a software update for the Droid X since 2/16/12.
I would like for you to put the device in Safe Mode http://bit.ly/OAXCYh and then check your email to see if it still turns off.
Safe Mode temporarily disables all applications that have been installed via the Android Market. Performing this troubleshooting step is necessary to determine whether a 3rd party application is the cause of an Operating System / Application issue.
I want you to try that to see if there is something else affecting why the phone battery goes low only when you check email.
Tamara H.
Follow us on Twitter @VZWSupport

FCP 5 won't stay open for more than a minute

First I upgraded from Quicktime to Quicktime Pro to convert .avi's to .mov's. That worked for about three weeks then suddenly all converted files played without any sound. Now after editing an mp4 on FCP I decided to upgrade the media to avi, so I upgraded the mp4 to avi using VisualHub, whose output plays fine in Quicktime (with sound), but while editing it together in FCP I've started to have problems while trying to integrate FCP with LiveType. I have to save after every change to the sequence. After integrating a LiveType file into FCP I found FCP shuts down after running for a minute, regardless of what I'm doing with it.
I'm currently working on an iMac Intel Duo and hope this doesn't rise out of a non-universal version of FCP running on an intel processor (perhaps a problem with Rosetta). If so I might have to upgrade to FCP 5.1
Any ideas?

How would I check the pixel dimensions?
With the mp4 they were copied off of a dvd with a program called Handbrake (it copies DVD's onto your iPod), though often whatever I get out of Handbrake I also have to put through a program called moviepod (which converts media files into mp4 format and once the conversion's done it appears on your iTunes browser).
I recently purchased a DVR which can load DVD's into the computer through multiple formats but then the DVD was rented and I figured I just as well use the media I already had in my computer.
Oh, and by the way, Thank you for the help so far. Though I'm afraid there's no clear resolution in sight I appreciate your apt attention.
The avi media is just the mp4 media converted through VideoHub (I've had no luck with either .avi or mp4 files using Compressor). The problem with editing may rely in my choice of converting programs and not FCP at all (the truth is I don't know much about these programs, outside what I use them to do (convert media) ).

Been on hold two different times for more that 30 minutes....Followed the instructions and my phone said that activation has failed. FRUSTRATED

how do i activate my 6? I followed the instructions and it said my activation failed...now on hold for 2 different times. been screwing with this for 3 hours.

I highly doubt that the VZW CS reps are sitting by idly letting people stew on hold. I'm sure there are loads of people just like us that have questions, but they don't know how to get online and figure things out. Yes, people like this have iPhones. My point is, I wouldn't blame this on Verizon's Customer Service. If you're truly frustrated, take the suggestion given and try it.

Monitor any record to stay in queue for more than 5 minutes under AQ ADMIN schema

Hi All,
We need to prepare script which monitor/notify us the record which stays in queue for more than 5 minutes under AQADMIN queue tables. Can someone throw light on this?
Regards,
MD

Hi Asif,
We need script to monitor if we have "waiting" status in msg_state column of the below table is waiting for more than 5 minutes.
SQL> desc AQ$TBL;
Name                                      Null?    Type
QUEUE                                              VARCHAR2(30)
MSG_ID                                    NOT NULL RAW(16)
CORR_ID                                            VARCHAR2(128)
MSG_PRIORITY                                       NUMBER
MSG_STATE                                         VARCHAR2(16)
DELAY                                              DATE
DELAY_TIMESTAMP                                    TIMESTAMP(6)
EXPIRATION                                         NUMBER
ENQ_TIME                                           DATE
ENQ_TIMESTAMP                                      TIMESTAMP(6)
ENQ_USER_ID                                        VARCHAR2(30)
ENQ_TXN_ID                                         VARCHAR2(30)
DEQ_TIME                                           DATE
DEQ_TIMESTAMP                                      TIMESTAMP(9)
DEQ_USER_ID                                        VARCHAR2(30)
DEQ_TXN_ID                                         VARCHAR2(30)
RETRY_COUNT                                        NUMBER
EXCEPTION_QUEUE_OWNER                              VARCHAR2(30)
EXCEPTION_QUEUE                                    VARCHAR2(30)
USER_DATA                                          TEST1
PROPAGATED_MSGID                                   RAW(16)
SENDER_NAME                                        VARCHAR2(30)
SENDER_ADDRESS                                     VARCHAR2(1024)
SENDER_PROTOCOL                                    NUMBER
ORIGINAL_MSGID                                     RAW(16)
ORIGINAL_QUEUE_NAME                                VARCHAR2(30)
ORIGINAL_QUEUE_OWNER                               VARCHAR2(30)
EXPIRATION_REASON                                  VARCHAR2(31)
CONSUMER_NAME                                      VARCHAR2(30)
ADDRESS                                            VARCHAR2(1024)
PROTOCOL                                           NUMBER
Regards,
MD

I am encountering crashes with Photoshop Elements 12. If I uninstall and then reinstall the software, will I jeopardize the 100s of photo images I have already moved into the Organizer? Any cautions for me

I am encountering crashes with Photoshop Elements 12. If I uninstall and then reinstall the software, will I jeopardize the 100s of photo images I have already moved into the Organizer? Any cautions for me?

If the app is designed correctly, the no, you won't. However, you'd have to ask the people who wrote the software, Adobe.

HT1296 I recently purchased songs from my iphone. All good... But I then went to put them on my ipod touch. They seemed to have downloaded but the songs wont play and the song title/the text, appears in a grey colour.

I recently purchased songs from my iphone. All good... But I then went to put them on my ipod touch. They seemed to have downloaded but the songs wont play and the song title/the text, appears in a grey colour and there is a downlaod symbol in front of the song title. what do i do next?? They play on my iphone and from the itunes library but not from my ipod touch.

If the songs are still on your ipod, make sure autosync is disabled in iTunes on your computer, connect and right click on it in the device list, then choose "transfer purchases" to copy all bought media and apps from your ipod to your computer.
If the songs are not on your computer and got deleted from your ipod as well, you can't get them back, unless you have a backup of your iTunes library as part of your computer backup.

I have elements 10, the organizer wont stay open for more that a minute, i open it closes.

Similar Messages

Maybe you are looking for