I have forgotten my administrator password. How do I reset a new password?

I have forgotten my administrator password. How do I reset a new password?

Mac OS X 10.6 Help- If you forget your administrator password
The above also works in Leopard.

Similar Messages

  • Hi.. i have forgotted my password, then i did reset a new password.but still unable to use,i been go to i store outlet, the staff told me my apple id long did not use not active anymore , so ask me to call up office to activate back the apple id acount.

    hi.. i have forgotted my password, then i did reset a new password.but still unable to use,i been go to i store outlet, the staff told me my apple id long did not use not active anymore , so ask me to call up office to activate back the apple id acount.

    Hello, wnnsiau
    Thank you for visiting Apple Support Communities.
    If your account is disabled, see the steps in the article below.
    Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
    http://support.apple.com/kb/ts2446
    If you have tried the steps above and this issue persists, see the article below.
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Cheers,
    Jason H.

  • Os x 10.6.8 How can I reset a new password (admin.), please.

    I got my laptop out of storage and can't use it.

    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.

  • I have forgotten my administrator password and can't find my Mac OS X Install Dvd..what can I do?

    I have forgotten my administrator password and can't find my Mac OS X Install Dvd to reset it, what can I do?

    OK, try this:
    http://osxdaily.com/2010/08/10/forgot-mac-password-how-to-reset-mac-password/
    Be very very careful if you decide to use Terminal. Even a small typing error can cause a disaster. And terminal commands must be typed exactly as shown, including spaces.
    Good luck.
    p.s. Your Apple ID and password - different from the computer log in password - are what you used to get to this discussion.

  • HT1631 I don't have an encrypted code, I didn't use my vault file upon starting my computer and I didn't associate it to my apple ID. I bought a refurbished macbook pro (10.7.4), and now I forgot the administrator password. how can I reset that?

    I don't have an encrypted code, I didn't use my vault file upon starting my computer and I didn't associate it to my apple ID. I bought a refurbished macbook pro (10.7.4), and now I forgot the administrator password. how can I reset that?

    A bug has been filed: https://bugzilla.mozilla.org/show_bug.cgi?id=644566 .

  • I have forgotten my administrator password, and there are no hints. I have a Mac OS X Mavericks. When I get to the reset password screen, it has no hard drive to select. What now?

    I have forgotten my administrator password, and there are no hints. I have a Mac OS X Mavericks. When I get to the reset password screen, it has no hard drive to select. What now?

    If you're using FileVault, you first have to unlock the startup volume in Disk Utility. Select it and click the Unlock button in the toolbar. Of course, this is only possible if you know another password to unlock the volume. If you don't, follow instead these instructions.

  • HT201240 I've forgotten my administrator password and can't download software. can anyone advise how to reset a new password without having the original?

    I've forgotten my administrator password and can't download software. can anyone advise how to reset a new password without having the original?

    Forgot Your Account Password
    For Snow Leopard and earlier
         Mac OS X 10.6- If you forget your administrator password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.
    If you are unable to boot from an installer DVD:
    (these will only work on Leopard or earlier)
      1. Boot to Safe Mode by restarting and after the chime press and hold down
          the COMMAND-S keys until a black screen with white type appears.
      2. At the prompt, type the following commands pressing return after each
          command line:
         /sbin/fsck -yf
         If you do not receive a "Filesystem OK" message then repeat this command
         until you do.  If after seven tries you still do not receive a "Filesystem OK"
         message, then the system is corrupted and needs to be reinstalled.
         mount -uw /
         cd /private/var/db/netinfo
         mv local.nidb local.old
         rm ../.AppleSetupDone
         shutdown -r now
    The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
    This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
    Reset Admin Password Using The Terminal
    You can reset the password by printing out (or writing down) and carefully following these steps.
    First, find the short name of the admin user on the machine. The easiest way of doing this is by looking at what the directory is called in the Users folder.
    Now, start in Single-user Mode. It should boot into a command line.
    Enter these exact lines. Press RETURN after each.
    mount -uw /
    ifconfig lo0 up
    cd /var/db/netinfo
    netinfod -s local
    Now you'll need that short name. Enter "passwd", a space, and the short name of the admin. For example, if the admin was rather prosaically called "imadmin", you would enter "passwd imadmin".
    The computer will now prompt you to change the password for "lmadmin" (or whatever the short name was). Go ahead and enter a new password.
    Now, enter:
    sync
    reboot
    and the machine will reboot. The admin password should now be changed.

  • I have forgotten my password, how do i reset without wiping my ipad?

    i have forgotten my password, how do i reset without having to wipe my ipad 1?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How do you reset you handset password, if you have forgotten it?

    Basically I wanted to get pictures from my blackberry to my computer, so I installed the blackberry desktop application to transfer your media from blackberry to PC. This went fine, so then I plugged my blackberry into my computer using the USB lead, when I did this a box came up asking for my password, I assumed this would be my handset password, however when I tried this it did not work.
    So I unplugged my blackberry, and then I tried to go on my blackberry, and it came up asking me to type 'blackberry' into a password box, which I did, and then it asked me for a password, which I typed in my handset password however this is not working
    How do I reset my handset password without being able to get onto my blackberry? I dont want to lose all of my photos etc.?
    PLEASE HELP !!

    Upon the last failure, the BB will wipe clean and be like a brand hew device. No password at all will be assigned to it, and you start over (starting, of course, with restoring from your most recent backup).
    I am not familiar with all of these "readings of other similar problems" you report. There are plenty of threads here where folks have forgotten their password and wind up wiping, but only rarely do I recall anyone discussing a situation close to yours.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My daughter has forgotten her iPad password, how do i reset it?

    My daughter has forgotten her iPad password, how do i reset it?

    You can't reset a passcode. you have to restore the device and you want to sync to the computer that you always sync with if you want to restore all of the data and setting. If that computer is unavailable - you can use another computer - but you will have to erase the iPad completely and will not be able to recover your data.
    See this for "how to restore"
    You may have to restore using recovery mode

  • My daughter has forgotten her password, how do I reset it?

    My daughter has forgotton her password, how do I reset it?

    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    

  • Hello, I have a Mac Book Pro mid 2012, and forgot password, how do I reset it without losing info?

    Hello, I have a Mac Book Pro mid 2012, and forgot password, how do I reset it without losing info? I certainly dont want it to be reseted by apple with my info from work, thank you very much for further response.

    First, make sure caps lock is not on.
    You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
    Otherwise*, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
     ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
    *Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
    If you forget the password and FileVault is on

  • My old email account was disabled and I can't remember my password - how can I reset my password or move $ to a new itunes/email account?  It seems I must have mis-typed my information because I can't answer the security questions correctly...

    My old email account is disabled and I can't remember my itunes password - how can I reset my password or move $ to a new itunes/email account?  It seems I must have mis-typed my account information because I can't answer the security questions correctly...

    ➡ https://iforgot.apple.com/

  • HT201304 i have forgotten my pass code how do i find out what it is?

    i have forgotten my pass code how do i find out what it is?

    You don't... if you cannot remember it, restore the device.

  • I forgot my administrator password, how can i reset it without losing any of my work? MacBook5,1 version 10.6.8 (I had my laptop for 7 seven years, its an old model).

    I forgot my administrator password, how can i reset it without losing any of my work?
    MacBook5,1 version 10.6.8 (I had my laptop for 7 years, its an old model).

    For Snow Leopard and earlier with installer DVD
         Mac OS X 10.6- If you forget your administrator password,
         OS X- Changing or resetting an account password (Snow Leopard and earlier).
    For Snow Leopard and earlier without installer DVD
        How to reset your Mac OS X password without an installer disc | MacYourself
        Reset OS X Password Without an OS X CD — Tech News and Analysis
        How To Create A New Administrator Account - Hack Mac

Maybe you are looking for