I have installed firefox 8.0.1. When I start firefox up it says I have the latest version, but simultaneously there is a warning saying that I do not use the latest version?.
When I click the firefox icon it tells me that I have firefox 8.0.1.Under is written Firefox-is-up-to-date (shadow line) It also mentions that I use the release-update channel.
When i start firefox there is a warning that I do not use the latest version
This - http://www.google.com/firefox - is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox, I don't think it is being maintained by Google.
Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''about:home'''. It looks similar to the old Start Page, but it isn't exactly the same.
Similar Messages
-
When I update an app it asks for my password (as usual) but now there is no touch keyboard or other way to enter the password. This problem started, I think, after the latest OS update.What's going on?
I tried a reset and it did the trick.
-
When I use the Alt key and the clone tool, I get a message that I did not use the Alt key to define
Whe I use the Alt key with the clone tool, I get a message that I have to use the Alt key to define the area to be copied. What am I doing wrong?
I tried to check the alined box, but it would not work. I was able to check
the Sample box, but they they give you about 5 choices to check and I have
no idea what they are all about. I appreciate your help.
Dino
In a message dated 9/18/2012 11:09:06 A.M. Eastern Daylight Time,
[email protected] writes:
Re: When I use the Alt key and the clone tool, I get a message that I did
not use the Alt key to define
created by hatstead (http://forums.adobe.com/people/hatstead) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/4707426#4707426) -
My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.
Can not load the Organizer from the icon at the bottom of Editor screen, from the icon on the MacBook Air dock (OS 10.10.2), nor from the file in applications located with Finder.
I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences. I have searched on line for other options but not found any.
Can you help me?Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I am trying to burn a music cd on iTunes, but I am getting an error that reads that the cd burner is being used by another application. I know that I am not using the cd burner for anything else. I have restarted the Mac and nothing. Any ideas?
One other thread said it was fixed by waiting till prompted by iTunes to insert the blank disk, instead of putting it in first. Does that work? Found a number of hits on this Googling.
-
I backed up to my PC and attempted restore but I keep getting an error message that "iTunes could not restore the iPhone because not enough free space is available." I have a 32GB iPhone; only 13GB used!!! HELP! iCloud backup/restore did not work either! How can I resolve this problem to restore from back up.
If you're not a developer then you really should not have upgraded.
I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades. -
I have an IPhone 5 and the bluetooth will not stay connected with my 2011 Chrysler 200. I was told by Chrysler service department that it is a problem with the IPhone 5. Is there an update or a fix so i can use the bluetooth in my vehicle?
Iran uses GSM, so the iPhone 5 will work. It is already unlocked. Just put local Iranian SIM in phone.
-
I bought a new touch and tried to plug it into my pc. itunes said I need the 10.5 version with new ipod. I downloaded the latest version and when I try to install it to my pc it gives me the message that it can not remove the old version and contact tech support. Please help.
A window pops up when I try to install that says the old version of itunes can not be removed contact tech support. Then another window pops up that says the feature you ar trying to use is on a network resource that is unavailable.
perfect, thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select anyiTunesentries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
When I turn on my iPad the screen is the iTunes icon and usb cord. I can not go anywhere. Stuck on that page? What do I do?
iYou are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
I need help . My find my iPhone app has a different name under it. I have and iPad
Touch or tap the field that you want to use/select and it should get a box around it ; then double-tap that field to activate/type it. Once you've entered your password you can do the same (i.e. touch to select, double-tap to activate) to gradually get into Settings > General > Accessibility > VoiceOver and turn it off.
So to enter your passcode you first need to tap the 'slide to unlock' button to hightlight it (it should get a box around it), then double-tap it to unlock it. Then for your passcode tap the digit that you want and it should get a box around it; then double-tap that digit to type it; and similar for the other three digits in your passcode.
The manual (http://support.apple.com/manuals/#ipad) also that you should be able to switch voice-over off by connecting to your computer's iTunes :
Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither -
I'm using Windows XP on a PC and Windows 7 on a MacBook Pro.
In both cases, as my start page I use "http://www.google.be/firefox?client=firefox-a&rls=org.mozilla:nl:official"
Under the Googleframe stays the message "U gebruikt niet de nieuwste versie van Firefox. Upgrade vandaag om het beste uit het internet te halen!"
False: my Firefox is already up-to-date.You are indeed up to date. Firefox stopped using that address as its default start page when 4.0 came out - the page you're using may be (wrongly) assuming that if you're looking at it, you must still be on Firefox 3.6.
If you [[How to set the home page#w_restore-the-default-home-page|restore the default home page]] you should get more up-to-date information. -
Question
I have Windows 7 Home Premium. When I start Firefox 4, I get a User Account Control warning, "Do you want to allow the following program to make changes to this computer"? Is there a way to stop this warning?Check that you do not run Firefox as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
In the Compatibility tab, make sure that Privilege Level: "Run this program as Administrator" is not selected.
Also check the Properties of the firefox.exe program in the Firefox program directory. -
I have upgraded twice but home page still says "your not using the latest version. Upgrade now"
When I open Firefox and the home page comes up it tells me that i am not using the latest version and should upgrade. I also run into a stop scrip issue when I go to clear the history. It usually takes three tries to clear the history.
I would have to guess that your home page is pointing to one of the what's new pages from a previous Firefox release. Nothing to be concerned with here. You can change your home page to point wherever you'd like by clicking Preferences/Options->General and changing the home page option.
For the stop script history issue, do you know what web page is causing the issue? -
I have checked the version and found it is the latest. The message appears below the FireFox Start box.
I am seeing the same thing as you are. Its probably because that earlier Google homepage was used in earlier Firefox versions. So the page thinks that you are still using a previous version of Firefox.
Change the homepage to the following address:
* http://www.google.com/webhp?rls=ig
Check and tell if its working. -
Okay: My start page is the one Google provides: http://www.google.ca/firefox?client=firefox-a&rls=org.mozilla:en-US:official and frequently it has a note underneath the search box that "You're not on the latest version of Firefox. Upgrade today to get the best of the Web!" But when I check for updates on the About Firefox window, it says my Firefox is up to date. So what is the start page looking for? Is there some setting I need to adjust? Or is this a Google marketing ploy to get me to switch to Chrome?
I tentatively think I have the solution; this is for when the session id value 'thing', in about:config, referred to in other answers is already on the default/rest state.
I am assuming, I don't what to imply certainty in-case there is a value wrong in our browsers, that the problem stems from the fact that our homepage is no longer the default for Firefox.
So, go to 'Options'>'General' and delete the homepage. This will reset it to the new address, which is 'about:home'.
I hope this helps some people.
Maybe you are looking for
-
HT4962 is it possible for ipod touch (2nd generation) to use icloud?
Hi! I just received an iPad for my birthday and would like to use iCloud to link my calendars & music to my iPod Touch, but I am struggling. Have updated both devices and iTunes. iTunes reads "this version of iPod software (4.2.1) is the current v
-
Some Songs Won't Play on the iPod
I have a bizarre problem. All of my songs that are on my iPod are in iTunes (How else would they get on my iPod xP) and they all work fine. In general, the songs on my iPod work/play fine, minus a few. When I go to play them, the load up, I see every
-
Capture with Scene Detect: Clip Name Keeps Changing
I am editing weddings and my raw footage is usually on 3 tapes. I capture with Scene Detect checked and I name the clip "Clip", so Premiere labels each clip as Clip 01, Clip 02, Clip 03, etc. But when I put in my 2nd tape, Premiere starts labelling t
-
How to reduce the number of bytes for a picture
I want to reduce the number of bytes used for a picture to be sent to a site like Ebay or craigslist. I son't see any options in Iphoto for this purpose.
-
OAAM Integration with Third Party Authentication tool
Hi Guys, In our project we are planning to integrate OAAM11GR2 with OIM11GR2 and OAM11GR2 through Advanced integration. We have a requirement to call a third party authentication service from OAAM as a step up authentication for a particular user bas