I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!
I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!
Hey socestlavie,
Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M.
Similar Messages
-
Hi,
My iphone 4 won't connect to my mac book, it says that I need to install to latest version of itunes 11.1. When I go to itunes and try to update, it says that I have the latest version (10.6.3). Can someone please help me!
thanksYou are probably running OS 10.4 or 10.5 on a PPC Mac. No version of iTunes higher than 10.6.3 is available for these older Macs. I have the same problem, and while I can still use the PPC to sync my iPod, it can't be used to sync an iPhone 4 or higher. The only solution, as I discovered after upgrading to the iPhone 4, is to buy a newer Mac. I was able to get a 2006 MacBook running Lion for under $300, and that has been a lifesaver.
-
I have 3 Dell laptops at home and I am unable to connect my iPad 1 to any of them using the USB cable. If I connect the iPad to any Apple computer using the same USB cable, it works perfectly. I have installed the latest versions of iTunes and iOS, but still no luck. Apple Store Geniuses helped me determine that it wasn't my iPad causing the problem, but were less helpful when it came to dealing with non-Apple devices.
Options?Does the OS see the iPad at all? In other words does it show up in either the My Computer or Device Manager?
I've had problems in the past where I had to modify the registry to get my son's iPod to sync with a particular HP laptop.
If it doesn't show up at all have your tried using an external hub (with or without power)? -
When I start iTunes I get the following message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)". I have installed the latest version of iTunes but still get this message. Can anyone help?
Hello mustangcim243,
iTunes has various components bundled with it that it requires for general usage. I advise that we completely remove iTunes and all of these related components, verify that they have been removed, then reinstall. To do so, please follow the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Note: it is important to remove the 7 components in order. Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
If the above does not resolve your issue, I recommend we reset the SC Info folder:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
(See Step 4: Remove the SC Info folder)
Thanks,
Matt M. -
i have installed the LATEST VERSION of itunes in my windows and i bought the new ipad with retina display ,i had moved music into the ipad from my windows through the itunes but I DONT KNOW HOW TO MOVE THE VIDEOS IN MY VIDEOS LIBRARY OF MY COMPUTER TO MY
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I have installed the latest version of iTunes but it still shows outstanding in the App Store
I have updated the latest version of iTunes [11.2.1] but in the App Store it is still showing as outstanding and that it needs to be installed. How do I fix this?
Hello mustangcim243,
iTunes has various components bundled with it that it requires for general usage. I advise that we completely remove iTunes and all of these related components, verify that they have been removed, then reinstall. To do so, please follow the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Note: it is important to remove the 7 components in order. Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
If the above does not resolve your issue, I recommend we reset the SC Info folder:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
(See Step 4: Remove the SC Info folder)
Thanks,
Matt M. -
Please help. I cannot install the latest version of Itunes in my macbook pro computer as I don't have or seem to have forget my password for the installers. Thanks
You can download the 32-bit installer directly using this link: iTunesSetup.exe
-
Can someone help me with installing the latest version of iTunes for Windows 7 64 bit Home Premium?
Latest version of iTunes for Windows 7 64 bit Home Premium downloads just fine. But, fails to install.
"Unblocked and gave all permissions." Still, no go.
I see by reading the other posts on this forum that I am not alone. Any help?
Frustrated!Ok...This was very odd. I left the installation program, in what I considered a frozen state on screen. After about 30 mins, to my surprise, It installed! I'm not computer literate, so, I don't know what to say. But, to just WAIT for it to respond! Good Luck!
-
I download the latest version of itunes 10.5 but when i open itunes it is still 10.4
when i open itunes it is still 10.4. I have already tried restarting and shutting it down but when i open itunes it is still 10.4 version. i have not been able to connect my iphone 4s cause it doesnt allow 10.4....aaaahhhh
Not yet but you do have a store on Blosssom Hill Rd and you can make a reservation at the Genius Bar in advance > http://www.apple.com/retail/oakridge/
How much free space on the startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 15% free disk space. -
I am using a dual processor Power Mac running OS 10.4.11. The version I downloaded says it does not support this system.
Do I need an older version of Firefox?http://www.mozilla.com/en-US/firefox/all-older.html
http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox -
I updated my iphone 4s and now it wont sych with my itunes. It goes through the process and says sych comlete but then nothing is updated on my phone. I have tried restarting everything and restarted the apple mobile device but nothing seems to work. Please help!!!!
ClaireDid "everything" include this: http://support.apple.com/kb/HT1808 and this: http://support.apple.com/kb/TS1275, which says:
Error 23, 28, 29, 40, 1002, 1011, 1012, 1014, 1611: These errors may indicate a hardware issue with your device. Follow the steps in this article and also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. If the MAC address is missing or the IMEI is the default value (00 499901 064000 0), this can also confirm a hardware issue. -
I have Windows XP, and when trying to burn an iTunes playlist to an Audio CD, I get a message saying "Disc burner or Software not found". I have re-installed the latest version of iTunes, but I still can't burn to disc. Any suggestions?
Try HT203242: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2 -
iTunes quits when I'm trying to open it. I have installed the latest version and another user on the same Mac can use their iTunes when they log in. I have tried deleting iTunes and re-installing but it still won't open. Any ideas? Thanks.
Hold down the option key while starting iTunes and make an new library. Will it open then? If so, you have a bad library. With the new library import the library.xml version of the file in your iTunes folder. This will make it 90% like before (some metadata are not identical, but I don't know which ones).
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451 -
For some reason I cannot download and install the latest version of iTunes. 11.0.2. Could you help please? Each time I try, I get a command box saying 'The feature you are trying to download is on a network resource that is unavailable. Click Ok to try again or enter an alternate path to a folder containing the installation package iTunes.ms in the box below.
Please help!
Many thanks in advance
Ben Bentley
West Midlands
UK(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I have tried to install the latest version of itunes to my PC on Windows Vista & I keep getting - "Runtime Error!" R6034 & itunes will not open.
I have tried re-installing itunes but it is the same.....any advice?Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
In WebDynpro ,How to add the print function in a view ?
Hello! everyone, I have one task in protal, There are 2 views in my webdynpro project, the 1st view are list name items. when I click the name link will open the 2nd view , the 2nd view is a detail view page for each name, now , I want print the 2n
-
I've moved into a new construction development that is basically 1 street. We're told from the construction manager that the entire street has been wired for Verizon Fios. When I check the availablity on the website and someone on the phone, houses o
-
How many bus-powered usb external drives per hub?
I'd like to have two bus-powered USB hard drives (to be used as backups with Time Machine) connected to one powered USB hub. Would that work, or would a powered hub be likely to support only one bus-powered external hard disk? (In that case I could g
-
Want to change subscription plan from unlimited wo...
I recently subscribe for unlimited world plan which is very good but it did not include china. I would like to upgrade to the ¥1800 unlimited world china plan. Does it mean I will be charged at extra ¥700 this month from the original ¥1100 world plan
-
Hi All, Anybody can share the sample / experience on using vo for lov under Jdev 10g? I have tried to drag-and-drop a vo inside <listOfValues> but have no idea how to populate the selected value back to the lovinput. Thanks. Elton.