I have installed windows on the new NTFS partician and cant boot it back to mac

I have installed windows on the new NTFS partician and cant boot it back to mac. I dont think I loaded the bootcamp for windows properly now it is stuck in Windows with no bootcamp icon

Restart Windows, hold down the option key.
If you have a valid OSX install, the drive should appear. Choose the OSX partition and continue.

Similar Messages

I have just opened my brand new Macbook Pro and I'm a first time mac user. I have tried to download flash to enable me to watch you tube clips, but on trying to download it, it says I need to close Safari but after doing so, it still won't respond.

I have just opened my brand new Macbook Pro and I'm a first time mac user. I have tried to download flash to enable me to watch youtube clips, but on trying to download it, it says I need to close Safari but after doing so, it still won't respond. Any tips? Help?

Actually you need to quit Safari which is different from closing. With Safari open go the menu bar for Safari/Quit Safari.
Mac 101: Get Started Using A Mac

How to install windows on the new SSD

I am planning to buy a SDD.
However, how can I use my Windows Product ID for installing a new system on the SSD;
Is there any recommendations for this situation. I want to keep all lenovo functions in the new SSD.
BTW, it is T420.
THX!
Solved!
Go to Solution.

hi.
did you make the Lenovo recovery dvd set from your original factory windows installation?
if so, then:
- simply swap out the platter drive for the new, blank ssd.
- make sure that your optical drive is listed first in your bios boot order.
- boot disk #1 of the recovery disk set and follow the prompts.
- in short order you'll have the ssd set up with "all lenovo functions" as you've described you wish.
- you won't need the Windows key from the sticker on the bottom of your machine.
if you didn't make the set, then it'll take more work. once you've installed Windows on the ssd, you'll need to get Thinkvantage System Update from the driver matrix here: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167 and install it. you'll be able to update hardware drivers and Thinkvantage apps from it. once you've completed that, you can double check the matrix to catch anything newer than offered by TVSU.
hth a bit.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

I have just updated to the new iOS 6, and all my contacts have disappeared? Is there a possible solution to get them back?

I've just updated to the new iOS 6 and all my contacts have dissappeared, is there a possible solution to bring them back, I really need them back. Thanks in advance.

You tried clicking on "phone" then "groups" and "Show All Contacts"

HT1349 I have shared my itunes music between 2 computers, however some of the songs say "not authorized to play on this computer", however I have repeatedly gone through the steps to authorize, and indeed it comes back that I have authorized this computer

How do i get the few songs in my library to be "authorized to play" when all the other ones are. I have tried doing them individually, NOT WORKING This is on my home laptop. All of the songs play on one computer but some not on the other.

Find the songs that don't work -- one at a time. Right-click on the song in iTunes and do a "Get Info" On the summary tab, look at the account name field. That's critical -- is that account authorized on your computer?
That's the issue.

I have a question about the new Magic mouse and wireless keyboard.

Just wondering. My computer is in my kitchen, against a wall, and connected to my t.v. directly on the other side of this wall in my living room. My question is this, can I use the wireless mouse and keyboard with the computer in the living room, through the wall, while mirroring the screens? Hope this makes sense. In other words, will the magic mouse and keyboard have the strength of range to connect through the wall. Thanks.

It depends on how far it is and how thick your walls are. If there plasterboard partitions and only 10 feet apart then probably.
If you have a mobile phone with bluetooth, then try sending the computer a picture of file from similar distances to that you intend using the keyboard, if it works then a bluetooth keyboard and mouse should.

I purchased Lightroom 5 and Elements 12 and installed them on a computer. I now have a new computer, and wish to install them on the new one. When I tried to do so, my only option seemed to be Adobe Cloud. When I was asked for my LR serial number, it was

I purchased Lightroom 5 and Elements 12 and installed them on a computer. I now have a new computer, and wish to install them on the new one. When I tried to do so, my only option seemed to be Adobe Cloud. When I was asked for my LR serial number, it was not accepted. Please help me install these two products; I prefer stand-alone, rather than a monthly fee. Thank you

PSE 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PE 10, 11, 12 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

# Question
I am using Firefox 3.6.13 and have installed Windows Media Player 1.0.0.8 for Firefox. However, if I attempt to open a file with a .wmv extension it appears to function properly, except, that I cannot "play" the file. What am I doing wrong?

You probably have not seen anyone reporting the exact same problem as you. All three crash reports have the same crash signature and as currently ranked 67 it is not the commonest of reasons for a crash.
I hope you enter your email contact information when reporting crashes. I note you see this crash when using videos, others may possibly see this crash in other circumstances.
You have already tried the obvious, attempts at a fix so it is now down to wait and see, maybe developers working on the bug will report something or fix it.
Did you try my suggestion of installing portable ESR ?
For forum cross referencing purposes
* Crash Reports for Crash IDs bp-71697f5d-41d4-48ae-9db9-3e6302130607 bp-6e1347bc-153f-433a-9c35-a5f022130607 bp-92a533a2-9e09-4c1e-8df7-deb4c2130607
*(all three) Crash Signature: EnumSoftwareMFTs(_GUID const&, unsigned int, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, __MIDL___MIDL_itf_mfobjects_0000_0006_0003 const*, IMFActivate***, unsigned int*)
* Related bug 858667 NEW crash in mozilla::wmf::MFTEnumEx @ EnumSoftwareMFTs
*I note this was first seen in Fx21 and is 100% Windows 7

I have installed iTunes on my new windows 7 dell laptop every time I start it it comes up with an error saying itunes has encountered a problem and it closes ? any answers have tried command prompt reset and it has not resolved it also un/reinstalled

I have installed iTunes on my new laptop OS Windows 7. I have two iphones, a 3rd gen nano and an ipod classic.
Since the install yesterday I keep getting an error message which itunes has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a soluion is available.
I have un and re installed and followed a command promt reset.
I still have the problem. Any ideas?

Ok. So I created a new account and iTunes did work. I went back into my original account and tried again and just to be more clear, after I open iTunes it asks me to accept or decline the agreement, I do that, then it says "updating library", and then one all the bars are full it closes and says "iTunes has encountered a problem and needs to close."
okay, let's start working through the user-account-specific causes of this message.
one possibility is damaged itunes preference files in the user account in which you're getting the crash. (there's a different set of those in each different user account, which is how we can get crashes limited to a single user account.)
if that is what is going on, we can often get past this by rebuilding the preference files in the account that is crashing. for the preference files rebuild technique, see my reply to kusma in this post:
b noir: Re: iTunes 7.0.1 crashing

Recently I have install windows 7 in my old laptop since then the program Itunes show one music library at the top of Itunes and another bellow my device. The problem is that I can upload music to the top library but I can't move them to my Itouch librar

recently I have install windows 7 in my old laptop since then the program Itunes have 2 libraries one at the top which I can put in new music and the other just below my I touch device botton. The problen is that now whenever I upload music is going straigh to the top library and from there I can't move it to my Itouch library. Before I never have problems cause I could only see one library and not 2 like now .....HELP !!!!!

I do not understand what you mean about two libraries. Can you post a screen shot?
Maybe this will help with your problem
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
iTunes 11 for Windows: Syncing overview
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad

My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows. The system is up and running on the SSD, with my old system disk now used for storage as it is stil

My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows. The system is up and running on the SSD, with my old system disk now used for storage as it is still readable. The only Adobe product I have reinstalled so far is Reader XI but I would like to reinstall Elements 8 and Acrobat 9 without taking up more licences as both are also installed on my laptop. Can you point me to the best way to do this? - Thanks

If you have the two allotted activations already and one was lost on the hard drive that failed then you need to contact Adobe Support thru chat and ask them to reset your activations.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

I have installed FF 8, the problem is whenever i try to launch it, it never launches (directly or indirectly), but when i check in the task manager it shows FF running. I have installed it on windows XP professional.

I have installed FF 8, the problem is whenever i try to launch, it never launches (directly or indirectly), but when i check in the task manager it shows FF running. I have installed it on windows XP professional. Never gave an error, no messages, etc. I have disabled all the addons.

The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
For your SysFader issue, this "may" be the problem:
1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
2 Click on the "Advanced" tab. This will load a new page of options.
3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

HT1386 I have had to reformat my hard drive. I have installed windows 7 and want to know how to transfer the songs on my iPad back to the newly installed iTunes on my compute?

have had to reformat my hard drive. I have installed windows 7 and want to know how to transfer the songs on my iPad back to the newly installed iTunes on my compute?

Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.

I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.
4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM
54e24e0e-dfc4-466b-a347-4bd95536773e03-Jan-1312:30 AM
22d351d2-6461-4f33-9fbd-6d31f769e73103-Jan-1312:30 AM
8a8da99b-335e-43bb-aa12-4634aa0b431003-Jan-1312:30 AM
a15bb095-aeb9-44e1-a79c-1a17cee207d503-Jan-1312:28 AM

None if these crash reports seem to have been send.
Do you have crash reports with a "bp-" prefix that were submitted and that show a crashing thread?
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can use one of these to start Firefox in Safe mode:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes

I have installed windows on the new NTFS partician and cant boot it back to mac

Similar Messages

Maybe you are looking for