I have ipad mini 2 updated to ios 7.1.2.  Now ipad keeps shutting down and rebooting to the apple logo. I factory reset and redownloaded software in recovery mode.  Still happening.  What else can I do?

I have ipad mini 32gb.  I updated to IOS 7.1.2. Since then ipad keeps shutting down and rebooting to the apple logo.  It happens so many times I cannot use the ipad.   I have tried factory reset and reinstalled software in recovery mode. Ipad is only 1 1/2 years old and in great condition.  Is there anything else I can do besides soend $200 to fix it?

Sounds like a hardware issue to me going by the CRC error you mentioned. I'd make a Genius Bar reservation (you'll need your Apple ID) if you have a nearby Apple Store and get it evaluated. The evaluation is free but repair/replacement could incur other charges.
Genius Bar reservations:
https://www.apple.com/retail/geniusbar/

Similar Messages

  • My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo.  Tried reset option/troubleshoot several times.  Also wont show up on computer at all when I plug in to USB.

    Can someone please help with my issue listed - My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo.  Tried reset option/troubleshoot several times.  Also wont show up on computer at all when I plug in to USB.
    Any tips are very much appreciated.

    Place the iPod Touch into DFU mode.  This will be similar to what the factory would do to install the iOS onto new iOS devices.
    Placing it into DFU mode will allow you to "format" and install the current iOS for that device.
    To place your iOS device into DFU mode.
    First connect you iOS device to you computer.
    Open iTunes if not already open
    Now turn off your iOS device using the power swipe.
    Press the home and sleep button on your iOS device for 10 seconds.
    Release the sleep button but carry on holding down the home button.  For another 10 seconds.
    Your iOS device should now be on DFU.  Click on restore and iTunes will download the latest iOS for your device.
    Hopefully that sorts it if not, you will have to go to a service centre or call Apple Care up and get them to collect it and repair it. (replace it)  Or go into an Apple Store.

  • HT4623 why can't I get my first generation iPad to update to iOS 6.0 or higher it keep saying 5.1.1 is the latest update

    how do I get my first generation IPad to update to 6.0 or higher

    It's incapable of running an iOS version higher than 5.1.1.
    (106152)

  • My iPad constantly turns off and restarts, showing the apple logo on the screen. How do I fix this?

    My iPad constantly shuts down, then restarts showing the apple logo. This happens over and over. I have tries resetting and restarting. What to do next?

    Make sure IOS is updated to latest version
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings
    (no media or data will be deleted from the device, this will only take a minute).
    If that doesn't work then backup and then restore the device as new first (to isolate cause of the issue). Then from backup if necessary.
    How to back up and restore (iCloud and iTunes) 
    http://support.apple.com/kb/HT1766

  • HT4623 I update my iPad mini retina with iOS 7.1 resulting in not being to down load NOR OPEN  PPT, WORD files using iWork, page, can anyone pls help?

    I update my iPad mini retina with iOS 7.1 resulting in not being to down load NOR OPEN  PPT, WORD files using iWork, page, can anyone pls help?

    You want to just use Dropbox until the dust settles.  To use it from iWork for iOS (assuming you have the Dropbox app installed on your device), open the document in Keynote (for example), tap the share icon (box with upward pointing arrow), choose Open in Another App, choose Keynote as your format, then choose Open in Dropbox and you will get an option to save it to your Dropbox account.  To open it from Dropbox in iWork for iOS, open the document in the Dropbox app, tap the share icon, tap Open in Keynote (for example).  It's a bit clunky, but works. 

  • I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

    I have a macbook pro core i7 mid 2012
    And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • My iphone 4 turned black today and my sleep(lock) button doesnt work. I have tried to let it charge to see if it would restart but still nothing. what else can i do to turn it back on??

    my iphone 4 turned black today and my sleep(lock) button doesnt work. I have tried to let it charge to see if it would restart but still nothing. what else can i do to turn it back on??

    Unless somebody else has a micracle workaround I don't know.  Probably get the phone in for repair since it has been living on borrowed time so far and now you absolutely must have a working button.

  • I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond.   I have tried pressing the two buttons together and briefly get the Apple logo but still can not start up, the logo disappears.   I have tried connecting the iP

    I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond.   I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears.   I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac).   What else can I do?

    You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
    If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
    I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
    Snow Leopard can still be purchased in the U.S. Apple Online Store.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear.

  • HT4061 I went to upgrade my software on my phone from 5.01 to the lastest version. now all my phone will do is blink the apple logo. it will not turn on or off. What can I do?

    I went to upgrade my software on my phone from 5.01 to the lastest version. now all my phone will do is blink the apple logo. it will not turn on or off. What can I do? Even when I plug it into the computer, the computer doesn't see the phone.

    Try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore

  • I have a 5.1.1 3GS phone that cuts off calls after about 3-4 mins, and goes to the apple logo, the phone then resets to login after a further 1 min. Any suggestions

    I have a 5.1.1 3GS phone that cuts off calls after about 3-4 mins, and goes to the apple logo, the phone then resets to login after a further 1 min. Any suggestions

    You have outdated iOS software so without upgrading it first there is little you can do.   A restore will force you to upgrade as 5.1.1 is no longer signed.

  • I have a macbook and when I power it on and then select myself as a user...It won't power up. It stays in the white screen with the apple logo. I am online currently under 'guest user'. Is there anything I can do from the keyboard to fix this??? Help!!!

    I have a macbook and when I power it on and then select myself as a user...It won't power up. It stays in the white screen with the apple logo. I am online currently under 'guest user'. Is there anything I can do from the keyboard to fix this??? Help!!!

    Could you specify the model of MacBook and the OS X it's running, please? Some of the advice or references vary along with the system, so this could be helpful to formulate a reply. I've never used a Guest User selection, but do have more than one User.
    If the computer does not have an optical drive, you may be able to boot it into a recovery disk mode or something; in an attempt to see what is wrong and maybe fix it.
    Good luck & happy computing!

  • HT4623 What does it mean after you update your phone and then your phone starts to blink on and off showing the apple logo only?

    What does it mean after you update your phone and then your phone starts to blink on and off showing the apple logo only?

    Read http://support.apple.com/kb/ht1808

  • I have an ipod touch 3rd gen.I used the function of erasing all content and settings and now i am stuck on this screen with the apple logo and a loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!

    i have an ipod touch 3rd gen.I used the function of erasing all contents and settings and now i am stuck with this screen showing the apple logo and the loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!

    Hold down the on/off button and the home button for 20 to 30 sec, when the iPod starts and the Apple logo is on the screen release the on/off button but continue to hold the home button until you see the plug into iTunes screen.  Connect the iPod to iTunes and you should be good to go.

  • Why Does My iPad 3 Keep Rebooting On The Apple Logo Who Helps Me Recives A 10$ Itunes Gift Card Or Any Currency He Is

    My iPad Just Drained Of Battery After Updating To IOS 7.1.1 And I Left It To Charge And It Opened The Apple Logo And Drains Of Battery Again And When I Press The Sleep/Wake Button And Home Button When The Apple Logo Shows Up It Shutsdown And By Itself It Showes Me The Battery Charging Logo Any Help Plz If Someone Helps Me And My iPad Works Ill Give Him A 10$ Or Whatever Currency He Is A Gift Plzz Reply Fast

    You do not need to offer and you should not offer payment payment for help on a user to user support forum. None of us participate here looking for payment. That is not how this forum works.
    Have you tried restoring the device to factory settings? You should backup first, restore to factory settings and them restore the backup as described in here.
    Use iTunes to restore your iOS device to factory settings
    Make sure that you read the last part of the article about using recovery mode to restore. You might need to use it.

  • TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

    My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

    Hello chindeepchow,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#3000
    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Have a nice day,
    Mario

Maybe you are looking for

  • Third party mm process

    Hi I know for third party with mm process we have to mark item category S and account assignment category X my question is i want third party for project stock with account assignment Q is it possible or I should use X as stander if yes then how this

  • Line Chart doesn't display all the rows

    Hi Friends, I have created a Line Chart with Flash Chart type. My query returns 52 rows but on the chart it shows only 15 values on the x-axis. Is there any thing that I need to specify for maximum number of rows ? You can see my example here : http:

  • After IOS 8.3 update my music app shuts down everytime I try to open it!!!!!I

    i Just updated my iphone 6 to the new IOS 8.3 software and now everytime I try to open my music app it shuts down inmediately!!! It never happend before the IOS UPDATE

  • Content Area link inside a Portlet

    I built a portal page titled Finance. I also created a content area titled Corporate Finance and published it as a portlet. When I add the Corporate Finance portlet to the page it's visible, however the portlet header link goes to a blank page. I was

  • Permission to delete resources?

    Once a resource has been made Inactive, is it only someone with Administrator group permissions that can then fully delete the resource or can that permission be enabled for another group? rgds Steve