I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?

Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated.

Similar Messages

TS3716 installed the new itunes and now my ipod nano does not show in the device menu

installed the new itunes and now my ipod nano does not show in the device menu

There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

I updated to a newer version of iTunes and now my ipod touch does not show up as a device in iTunes. There is no 'Devices" category on the bar at the left

I updated to a newer version of iTunes and now my ipod touch does not show up as a device in iTunes. There is no 'Devices" category on the bar at the left

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

Before you connect any device to a new library go to the Devices tab of the the preferences panel via Edit > Preferences (Windows) or iTunes > Preferences (Mac) and ensure the box next to Prevent iPods, iPhones, and iPads from syncing automatically is ticked. You can now safely connect the device to your computer without the danger of media being automatically deleted or overwritten.
To get all your content off your connect your iPad to your new computer.
Then use a 3rd party piece of software to transfer your content
I have found Senuti useful but there are others listed in the article I linked to in a previous post.
https://discussions.apple.com/docs/DOC-3991
That will let you transfer your non purchased content
For Purchased content log in to iTunes on the new computer
In Itunes Store click on Purchased under the Quick Links section on the right.
Download any music by clicking on the cloud button

I just purchased a new Linksys E2500 router. It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4.

I just purchased a new Linksys E2500 router. It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4. When I try it responds that the password is invalid. I have connected my MacBook Pro, iPad and iPod Touch with the same password.

Charles Swigart wrote:
It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4.
Try putting $ (a dollar sign) in front of the password.

Have just downloaded iTunes 10.5.2.(11) onto Mac Book Pro and now the earphones port does not work. Any suggestions? Annie H

Have just down loaded iTUnes 10.5.2.(11) onto MacBook Pro and now the earphone port is not working. Any suggestions. Annie H

My System Preferences>Soundoutput screen does not have the "Use audio port for" field.
Does your MBP have two separate audio ports - one for line-in and one output port? Then you wan't see that selector.
but the port has started to work again....Reason???
Perhaps there was dirt or something in the jack and the contact was bad.
(or you accidentally put the plug into the line-in jack instead into the audio-out; that happened to me once ).
Regards
Léonie

CD/DVD Optical drive appears and then disappears, replacement also does not show up

My laptop: HP Pavilion dv9601AU
I have read a similar post here but my problem is different. My problem is that the DVD drive *sometimes* show up in My Computer and *sometimes* dont. Even the BIOS does not detect it. When I formatted my laptop with Windows 7, to my surprise it was gone. But it appeared again and I somehow installed all the required drivers from my driver DVD.... then it dissapered again. It never came back.
Failed attempt 1: I tried to re-format the PC using virtual drive but the problem persists.
Failed attempt 2: Thinking it to be a physical loose connection, I took it to local HP service station, they removed the drive, put it back firmly, but in vain.
Failed attempt 3: They attached other similar optical drive but to my surprise, the new drive was also not detected.
Failed attempt 4: I tried Microsoft's "Fix It" thing and also read about removing "upper filters" and "lower filters" in registry. However, I didnt have any of those filters entry in the first place so no question about making changes to the registry.
Facts:
1) The drivers are installed. There should not be any problem with the drivers.
2) The lens is perfect. I was able to install all the drivers from DVD when the drive appeared for a short period of time.
3) The HP logo tht appears upon starting the laptop lingers for a longer period of time compared to what it was doing so when the drive was fine.
4) The boot menu does not show the optical drive.
5) I live in India where normal room temperatures go upto 42 degrees Celcius and my laptop gets much much warm most of the times. I think some damage has been done to the internal circuitry.
Please, if somebody can provide me a solution to this. How can I get back my DVD Drive working. The support personnel here are having no clue (especially after learning the fact that their new optical drive also didnt show up) I hope I get some guidance from you guys as what should I do next. Please help me.
Message Edited by jal_desai on 10-09-2009 06:51 AM

I am having the exact same problem with my customer's dvd drive sometimes showing up during boot (BIOS) and sometimes not. Also ran full system diagnostic software and everything else tests fine, although the drive is not showing present. I have also tried 2 different drives but they do the same thing. I would go on to say that if you always left the dvd drive out of the laptop, your boot problems would probably go away. This would then tell you that it's not your drive at all, but the connections on the MOBO or the traces (wires) connecting the drive to the MOBO.
I work on computers and have for several years and most times this is related to a MOBO issue since that is the only item left in this situation. You know it's not the drive since it's been replaced with the same issue so drivers/firmware are not the case. I am assuming you have already updated the BIOS as well, but this shouldn't matter. There could be a dirty contact, faulty component, or a bad trace (wire) on the MOBO which is almost always harder to fix and is better to just replace the MOBO. However, replacing the MOBO is usually expensive when you have to buy the part and then pay someone to install it making it not usually the best option. Even if it is a dirty contact, it was probably caused by something that was spilled which could cause problems later. In this case, I am probably just going to recommend disabling the internal dvd drive and buying a slim external usb dvd drive, and then saving their money for a new laptop. You will still have to wait through a slower boot while staring at the HP screen, but I don't think replacing the MOBO is the most economical thing to do, unless you are the manufacturer and have several laying around.
I know this isn't good news, but it is what I've found to be the case in my experiences. Anybody else care to chime in?

Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to setting-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
LN

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reloading software and reset to original factory settings.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?

Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Just upgraded to iTunes 10.6 and now it says it does not support Quicktime

Just upgraded to iTunes 10.6 and now it says it does not support Quicktime. Not much more to add. It's a MacPro running Lion.

warren.b.paul wrote:
So, I have managed to fix the problem.
I found that the upgrade had replaced my library files with empty ones.
So I restored the backup I made of them before the upgrade and
now all my media is back.
Great..
For those who run across this therad and haven't taken the effort to make a backup here is another approach that should work.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

I've a new account on iMac. When composing an email the contact list does not show up on the bar. WWhen I start keying in a name, it comes up with the address. How do I engage the contact list from the email?

I've a new account on iMac. When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email. When I start keying in a name in the email, it comes up with the person's address, which shows it is synced. How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?

With the New Message window open, go to the View menu and select "Customize Toolbar...".
In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
That item should be then added to the Toolbar for the New Message window.
Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another.

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
Toks

Hi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden

Why when i buy books on my ipad, when i log onto the store it does not show that i have purchased them?

Why when i buy books on my ipad, when i log onto the store it does not show that i have purchased them?
how many books and songs were therefore lost when i had to wipe my ipad?
this is SHOCKING from Apple... this is not in my domain of settings!!!

In the iBooks application on the Mac, there is a checkbox to sync highlights and notes across devices.
I don't see a similar setting in the iBooks app on my iPad. It may require iBooks on the Mac as a mediator.
Also:
Can I highlight text and make notes?
Yes, iBooks includes built-in Highlight and Note features. Highlight any word or passage of text within a book. You can also create a Note from your highlighted selection. Review your Highlights and Notes by tapping the Table of Contents button and then tapping Bookmarks. Highlights and Notes appear in their own section under Bookmarks.

I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

Similar Messages

Maybe you are looking for