I have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx

i have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx

You'll need to upgrade to Parallels Desktop 7 to regain compatibility.  Good luck....
On Edit: A minute late!

Similar Messages

  • TS1363 Just installed the new ITunes (running Windows 7) and now it cant see my IPhone

    Just installed the new ITunes (running Windows 7) and now it cant see my IPhone (which it saw fine just a few minutes ago). So I can't do a backup etc. What's wrong and how do I put it right?

    Well, without my doing anything, the situation has now righted itself. I came down this morning, switched on the computer and the IPhone - and now ITunes recognises the IPhone (it is listed under "Devices", which it wasn't before)
    I notice however that the IPhone doesn't get listed under "Devices" until the backup process is complete. So maybe this points to what may have been going on before? Except that the reason I was worried was because the first thing I wanted to do after dowloading the new version of ITunes is make a backup - and I couldn't because ITunes didn't "see" the phone.
    Anyway, not the first time I have had the eerie feeling that my relationship with IWorld is not in my control.

  • I just downloaded the new OS X Mountain Lion, and my iMessages status won't change!! How do I fix this?

    I just downloaded the new OS X Mountain Lion, and my iMessages status won't change!! How do I fix this?

    if you set up only iMessage account, you cannot change the status, because iMessage has no status.
    You should set up another service (for example AIM) with status service. Initially I didn't understand this "issue" too, but it is correct.

  • I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do?

    I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do? Also, I can not get start up chimes unless I have the factory startup disk in. Can the PRAM be reset with the factory startup disk in or must the mac boot from the hard drive? Need help.

    Help for forgotten passcode >   iOS: Forgotten passcode or device disabled after entering wrong passcode
    When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
    Try a search >  iOS: Understanding Spotlight Search

  • I just updated to Mountain Lion and now I notice on the side bar under "shared" an icon of a computer. It states that it is a memory card.  What is this? I can't seem to open it.

    I just updated to Mountain Lion and now I notice on the side bar under "shared" an icon of a computer. It states that it is a memory card.  What is this? I can't seem to open it. FYI: my wifi router is password protected.  Thank you!

    Do you have a printer that has a memory card slot on it?

  • I have just upgraded my i mac to mountain Lion and cannot access my emails as they were on entourage and my documents were on word documents and I can't access them either. Help!

    I have just up graded my i mac to Mountain Lion and now cannot open my e mails in entourage or my word documents. What do I do to get them back?

    It looks like you have Office 2004, which doesn't run on Mountain Lion. Upgrade to Office 2008 or 2011.

  • I downloaded the recent software update Mountain Lion and now my microsoft word, powerpoint, etc. are no longer supported. Why is this? What can I do?

    I downloaded the recent software update Mountain Lion and now my microsoft word, powerpoint, etc. are no longer supported. Why is this? What can I do?

    Depending upon how extensive your library of legacy Microsoft Office data files are, you may want to consider continuing to use Microsoft Office 2004.
    Microsoft Office's 2011 version is compatible with Lion and presumably either works with Mountain Lion or an update will make it so.  The problem with this approach is that Office 2011 will "convert" your earlier data files and there lies the rub!  For example, I have the need to weekly open a chart created in Excel 2004, but Excel 2011 trashes the chart in its "conversion."
    So I have approached the overall problem differently.
    The reason your applications do not work in Mountain Lion is that they were written for the older PowerPC CPU that all Macs used up to 2006.  When Apple made its transition to the Intel CPU, they licensed software that they included in all versions of OS X (from Tiger to Leopard and optionally, Snow Leopard) called Rosetta.
    Rosetta miraculously allows PowerPC applications to work on the Intel processor transparently; you do not know it is even present.
    The problem is that after 6 years of the transition, Apple's license to use the underlying software expired for OS X Lion and all version thereafter (and it is doubtful that the current owner of the software, IBM, would relicense it, even if Apple were inclined to do so).
    So for those of use that need to run Lion, I have offered the option to install Snow Leopard (with Rosetta) into Parallels 7:
                             [click on images to enlarge]
    And now Mountain Lion:
    Full Snow Leopard installation instructions into Parallels 7 are here:
    http://forums.macrumors.com/showthread.php?t=1365439
    Snow Leopard is $29 and Parallels 7 is $79 retail (cheaper from competitive sources) and Parallels offers a 14 day free trial of Parallels 7 on their website:
    http://www.parallels.com/download/desktop/

  • HT4061 i downloaded the new  software update via iphone and now i cant get my iphone 4 to work. it just has a picture asking me to connect to itunes

    i  downladed the new software for my iphone 4 via the iphone. now my iphne is not working and asking me to plug it in to itunes. how do i get my phone back to normal?

    jnmcnicholas wrote:
    now my iphne is not working and asking me to plug it in to itunes.
    Then that is what you need to do.
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Then...
    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Got the new MAcBook Air with Lion, and would like to sell the previous model. How do I delete everything?

    Hi guys.
    I got the all new MacBook Air 11" with Lion yesterday, and would like to sell the previous model (it was with SnowLeopard).
    What do I have to do to delete everything, including my account? Do I need the SuperDrive or is it possibile without one?
    Thanks!

    Erase and Install OSX Snow Leopard http://support.apple.com/kb/HT3910
    And yes, you need the SuperDrive for this.
    Stefan

  • I have just installed my new final cut express 4 and when I try to import a photo it quits unexpectedly? Why is this?

    What should I do about this and does it need to be reinstalled?? Please Help??!!

    As you give no info about formats, sequence settings etc. and how you are actually trying to import it is impossible to guess.
    Please give  as much information as possible as there are countless configurations and permutations of settings you may be using.
    You could try trashing the preferences with this free app for a start  http://www.digitalrebellion.com/prefman/

  • I try to reset my security questions via email, but the email adress is what I think the rescue address. But, the rescue was deleted by google and now I cant reset the questions. I went through my whole apple id, but couldnt find a solution. Please HELP!!

    please help

    See Here > Apple ID: Contacting Apple for help with Apple ID account security
              Ask to speak with the Account Security Team...
    Or Email Here  >  Apple  Support  iTunes Store  Contact
    More Info >  Apple ID: All about Apple ID security questions
    Note:
    You can only set up and/or change a Rescue Email BEFORE you forget the questions/answers.

  • I have just bought a new laptop with windows 8 and when trying to load itunes was told it was incompatible. Can anyone tell me what I can do to put itunes on my computer? thank you

    I have just bought a new laptop with Windows 8 and cannot load itunes from the existing disc or online as it is incompatible.Can anyone tell me what I can do now to get itunes on to my computer? Thank you

    See the futher information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
    See this migrate iTunes library post for advice on moving the library over from a previous computer and this post on deduplication.
    tt2

  • HT5460 I can  not update to the new OS X Mountain Lion. Whenever I do I get a message an error has occurred, timed out 102.W

    I can not update to the new OS x Mountain Lion.  I get an error that  says it has timed out then "102".   WHy can't I get it update??
    Thanks for your help.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Downloaded the New OS X Mountain Lion - Kernel Panics? HELP!!

    Downloaded the New OS X Mountain Lion and in my trouble shooting with support from discussion board I am told it sounds like Kernel Panics? HELP!!
    Specs:
    Model Name:          iMac
      Model Identifier:          iMac11,3
      Processor Name:          Intel Core i3
      Processor Speed:          3.2 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          4 MB
      Memory:          4 GB
      Processor Interconnect Speed:          5.86 GT/s
      Boot ROM Version:          IM112.0057.B01
      SMC Version (system):          1.59f2
      Serial Number (system):          W80341QLDB6
      Hardware UUID:          F7545A95-1201-5902-8E81-9B33FC4D6B40

    Post the KP report.

  • I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

    I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
    It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
    If anyone has any suggestions I would be happy to hear them.
    I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
    I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
    Anyone?

    Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
    The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
    I have my suspiscions about the drive but any help would be appreciated.

Maybe you are looking for