I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
Help!
If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.
Similar Messages
-
Today I turned on my iMac (OSX 10.5.8 1.8GHz PowerPC G5, 1.25 GB DDR SDRAM) mounted Firefox and was prompted to Download and install Firefox4 (FREE) which I did.
I was prompted to replace the previous Firefox with the newly downloaded and now I can't find the old version and the new version says it isn't supported on this architecture. The icon has a zero with a slash across it.
What do I have to do?Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html -
Help with the error message that ADE is not allowed to copy a book onto my Nook. I have tried authorizing and unauthorizing many times--at wits end with this issue.
I too am having the same problem. I have a new hard drive that was imaged from the old one and I'm trying to side load a book to my Nook Simple Touch.. I first installed ADE 4 then borrowed and downloaded a book from Overdrive. I tried a few times to delete and reauthorize both the computer and the Nook and each time I get an authorization error when I try to side load the book. I then found on the Nook forum that the Simple Touch and ADE 4 don't get along. So I uninstalled ADE 4 and installed ADE 3.
I then followed this recommended procedure found on the forum: I deleted the Digital Editions folder from my Nook, launched ADE 3 and authorized the computer, then connected the Nook. For a few seconds, hovering the mouse over the setting icon for the Nook displayed everything on the context menu grayed out. But then it showed the context menu and I was able to display the Nook's authorization, which was the same as the computer's. Still get the same error side loading the book. Deleting and reauthorizing doesn't help. And the Digital Editions folder is still missing from the Nook. -
My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?
I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks -
Satellite Pro M10 will not boot again and comes up with the error message
My Toshiba Satellite Pro M10 notebook will not boot again and comes up with the error message "load error" when I push the power button.
The problem arised after installation of "symantec system works" and trying to restart windows XP professional to make the installed program executable.
What can I do to get the notbook restart again?Hi everyone
If you cannot acces to the boot menu by pressing F8 you can try to recover the the master boot record from Windows Xp professional installation Cd, to do this:
Attention: don't run these commands if you have more than one operating systems running in your laptop.
Boot from Windows Xp installation cd
Choose repair installation from console by pressing "C" key.
A console will open asking you for administrator password, insert the password and press enter.
Run de command: FIXMBR (It will write a new boot record)
Run de command: FIXBOOT (It will write a new boot file)
Restart the laptop and now windows should start without problems.
Regards -
When I plug me ipad to itunes i get the error message that it is not supported and that i have to go to itunes and get "itunes installer" and re-install. if i do this will i loose my files and music?
No, you should not lose anything.
-
Can't print a photo. When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh. Uploaded latest update but it still doesn't work. Was going to try and load the software again but can't find the source as a download.
Cheers,
PapasailorYOu need to reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
I am new to apple hardware, and since upgrading software on my iphone 4S I receive this message. "this accessory is not supported by this iphone" when using my clock radio docking station. Is there away around this?
Hello GuynStPete,
Thanks for using Apple Support Communities.
I found the following support article that has some troubleshooting steps for you to follow in order to resolve this issue you're experiencing:
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Take care,
Alex H. -
Connecting my lightning to sd card reader accessoire THE iPad air Lets know' this accessory is not. supported by this iPad' could Someren help solving this issue?
Thanks for the advice. Unfortunately it didn't work. Have tried both kinds of restore. First restoring from backup and second as a new device (twice). Still get the same "Accessory not supported" message. Thank goodness I can use the old 30 pin SD reader with the lightning adaptor for my up-coming trip. I tried it again and it worked again. BUT I hate having a piece of Apple equipment that doesn't work.
-
I purchased Elements 13. When I tried to install it I get the error message that it is not supported by Vista. What do I do now?
If you can't install Windows 7 or higher or get a new computer with Windows 7 or higher, you won't be able to run Photoshop Elements 13.
There are many inexpensive refurbished or "off lease" computers available at very reasonable cost. Here is one example (scroll down):
Computers & Tablets, Desktop PCs, All Desktop PCs, Refurbished - Newegg.com -
Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later, however there was no problem updating my iPhone to iOS 5 through iTunes connceted to my dell laptop on the same wireless network. What gives?
Try disabling your firewall; both on your PC and the external Firewall/Router.
-
After the update to iOS 8 on an iPad 2 I receive the error: "This accessory is not supported by this iPad" using a digital AV adapter. It works for about 20 seconds before I get the error. Same adapter worked with iOS 7.1, same adapter still works on my iPhone 4s with iOS 7.1.
Curious if anyone else has this issue. The adapter is not a genuine Apple adapter, so I think I'll just buy an official Apple adapter, but I'd love to hear if anyone else has upgraded to iOS 8 and can still use their digital AV adapter on iOS 8 with iPad 2, and what brand of adapter you have. Thanks!Still not working. My adapter shows as an apple A1422. I can successfully plug it in to an iPad 2 with an older IOS but mine which is on 8.1.2, gives the error "This accessory is not supported by this iPad." I tried turning off the iPad and connecting it to the tv before turning it on. When it is turned on, it displays on the tv for a moment, then the message pops up and no picture is on the tv any longer. Clicking ok does not change the lack of a picture On the tv, but I can use the iPad as normal.
I've tried the adapter on a different iPad 2 that is not on IOS 8 and no message appears.
Help, please! -
This accessory may not supported by this phone
i don't know what's happened to my phone, yesterday night when my phone was in the charge suddenly stop charging with this error" this accessory may not supported by this phone", i tired more than 10 other cable(the authorized one), it started charging but just until 4% and the same problem happening again " this accessory may ..." and stop charging, then today i took my phone to apple servis center and they said if doing pdate to latest IOS7 maybe it solve, but first they diagnosed my phone to see is there hardwere problem or not and see there is no hardwere problem and my phone and battery worked in fine state, then theyr tried to update that and my iphone5 charged to 17% and suddenly stop charging with same error, she said before this error appear, she got the error 3004, i dont know guys what can i do with this phone any more if someone can help me to solve this problem i'll too appreciated that. plz help me
That message basically just means that Apple wishes you would only buy Apple products for your Apple products . I get that message all the time with my iPod dock. Just click OK and move on. As for the audio player - it may be broken.
-
This accessory is not supported by this iPhone
I have a Sony personal audio docking systyem RDP-XF100IP and all of a sudden when I place my iPhone 4s into the station to listen to music I get a popup saying that this accessory is not supported by this iPhone. I have had the system for quite a few months and never had a problem before. I have tried cleaning the connecttors on the system and phone but still get the message. When I place the phone into the system it does start chargeing it though so it is getting a connection. Any ideas?
I only could imagine that:
Your radio isn't licensed
Your radio doesn't supports your iOS -
Why doesn't my iPhone connect to tv? Keeps saying "this accessory is not supported by this iphone"
Why doesn't my iPhone connect to tv? Keeps saying "this accessory is not supported by this iphone"
I assume you are running ios 8.x. It's a bug.
Wait for a fix from apple. ... OR ... You could buy a new Apple brand connector. The latest connectors will work, even the older apple brand connectors do not work. OR try re-booting your ipad. OR wait until the video starts then attach the connector.
more info here:
Re: 30 pin to VGA adapter won't work since iOS 8
unable to use HDMI adapter after iOS 8.0 upgrade
Maybe you are looking for
-
How to read Sender Interface name in Adapter module
I have a need to read the Sender Interface name in an adapter module that will be attached to a Sender SOAP channel. Any ideas on how this can be done. I am familiar with the following code construct from the docs Hashtable mp = (Hashtable)inputModul
-
Hello All, We are looking to turn paper-based documents and reports into digital images to reduce physical storage and free office space. We bought a high-speed canon scanners to quicly scan, index and capture paper based document into pdf file forma
-
How to upload price for a item in price list using DTW ?
hi all, How to upload prices of all the items in price list using DTW ? What are templates used for it ? Item masters were already created. Jeyakanthan
-
Finding duplicate photos to delete
I want to delete duplicate photos in iphoto. I have too many to just delete individual ones, so want to know if there is a way to get the Mac to search the hard drive to find libraries with the same file reference. The problem is that I have created
-
how would i remap the hot keys on my compaq presario CQ62 so that what looks to be an eject button opens a program called calibre the internet button opens up a program called sandboxie and the calculator button opens up itunes thank you for the help