I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect to my MacBook it erases everything on had on there. Can someone please help with this problem?

I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.

dwgar1322 wrote:
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
Yes, you have WD software installed  REMOVE IT !! 
WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
(also dont use WD drives anymore)
Read all about it here:
https://discussions.apple.com/thread/5475136?start=255&tstart=0
See their website on removing the destructive WD software here:
http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/

Similar Messages

  • My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

    My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

    Following the fix here worked for me:
    https://discussions.apple.com/message/15680566#15680566
    except my plist file was in ~/Library instead of /Library.
    -Scott

  • Can someone please help with this code and what it means? Interval Since Last Panic Report:  6395213 sec Panics Since Last Report:          1 Anonymous UUID:                    8AEBAB22-1943-48B3-8D30-E4D07CCDEEA0  Tue Mar 18 13:30:13 2014 Machine-check c

    Interval Since Last Panic Report:  6395213 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    8AEBAB22-1943-48B3-8D30-E4D07CCDEEA0
    Tue Mar 18 13:30:13 2014
    Machine-check capabilities (cpu 3) 0x0000000000000006:
    family: 6 model: 15 stepping: 6 microcode: 198
    Intel(R) Xeon(R) CPU            5160  @ 3.00GHz
    6 error-reporting banks
    Machine-check status 0x0000000000000005:
    restart IP valid
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0x1000000020000000 invalid
    IA32_MC1_STATUS(0x405): 0x0000000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0x0020000000000000 invalid
    IA32_MC4_STATUS(0x411): 0x0000000000000011 invalid
    IA32_MC5_STATUS(0x415): 0xb200001080200e0f valid
    MCA error code:            0x0e0f
    Model specific error code: 0x8020
    Other information:         0x00000010
    Status bits:
      Processor context corrupt
      Error enabled
      Uncorrected error
    panic(cpu 2 caller 0x2cf3cc): "Machine Check at 0x002d3432, trapno:0x12, err:0x0," "registers:\n" "CR0: 0x80010033, CR2: 0x103dd000, CR3: 0x00100000, CR4: 0x00000660\n" "EAX: 0x00000000, EBX: 0x000000be, ECX: 0x6241b000, EDX: 0x00000001\n" "ESP: 0x6f853c58, EBP: 0x6f853c58, ESI: 0x00000000, EDI: 0x827a6b3c\n" "EFL: 0x00000016, EIP: 0x002d3432\n"@/SourceCache/xnu/xnu-1699.32.7/osfmk/i386/trap_native.c:258
    Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
    0x6853cf38 : 0x2203de (0x6b08cc 0x6853cf58 0x229fb0 0x0)
    0x6853cf68 : 0x2cf3cc (0x6bde94 0x6bdfc8 0x2d3432 0x12)
    0x6853d0d8 : 0x2cf409 (0x6853d110 0xde 0x6bdfc8 0x1)
    0x6853d0f8 : 0x2e6182 (0x6853d110 0x0 0x0 0x0)
    0x6f853c58 : 0x2d381e (0x20 0x7fffffff 0x6f853c88 0x29701be)
    0x6f853c68 : 0x29701be (0x684b6100 0xffffffff 0x6f853cb8 0x9d8e800)
    0x6f853c88 : 0x297028b (0x684b6100 0xffffffff 0x7fffffff 0x827aa38d)
    0x6f853cb8 : 0x296864f (0x684b6100 0x827aa38d 0xbe 0xffffffff)
    0x6f853d58 : 0x29699fe (0x827aa38d 0xbe 0x3 0x0)
    0x6f853de8 : 0x2d0cde (0xffffffff 0x7fffffff 0x6f853e08 0x2cd4ca)
    0x6f853e08 : 0x22d3e5 (0x684c5000 0x827a6711 0xbe 0x684c5de0)
    0x6f853e48 : 0x22e1c0 (0xd58c7f0 0x684c5000 0x0 0x0)
    0x6f853e98 : 0x22f6c2 (0xd58c80c 0x2 0x12 0xd7c0e00)
    0x6f853ef8 : 0x22f821 (0x2150f0 0x0 0x0 0xd58c7f0)
    0x6f853f18 : 0x21505d (0x2150f0 0x7000006 0xc00 0xffffffff)
    0x6f853f48 : 0x21b385 (0xede8f28 0x7000006 0xc00 0xffffffff)
    0x6f853f98 : 0x2b7bb7 (0xd4c9954 0x7fff 0xd4c9984 0x8)
    0x6f853fc8 : 0x2e60c7 (0xd4c9950 0x0 0x10 0xd4c9950)
         Kernel Extensions in backtrace:
            com.apple.driver.AppleIntelCPUPowerManagement(195.0)[D1550426-D346-4805-A777-06 63C69080DA]@0x2966000->0x298ffff
    BSD process name corresponding to current thread: iTunes
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:26:45 PDT 2012; root:xnu-1699.32.7~1/RELEASE_I386
    Kernel UUID: 859B45FB-14BB-35ED-B823-08393C63E13B
    System model name: MacPro1,1 (Mac-F4208DC8)
    System uptime in nanoseconds: 818233088876
    last loaded kext at 91751914186: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0x2990000, size 28672)
    last unloaded kext at 226546974280: com.apple.driver.CSRHIDTransitionDriver          4.0.8f17 (addr 0x21cd000, size 12288)
    loaded kexts:
    com.parentalctrl.kext.filter          3.8.1
    com.logmein.driver.LogMeInSoundDriver          1.0.3
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.driver.AppleHDA          2.2.5a5
    com.apple.driver.AudioAUUC          1.59
    com.apple.GeForce7xxx          7.0.4
    com.apple.driver.AppleUSBDisplays          323.3
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleMCEDriver          1.1.9
    com.apple.driver.Apple_iSight          4.0.1
    com.apple.driver.AudioIPCDriver          1.2.3
    com.apple.driver.ApplePolicyControl          3.1.33
    com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
    com.apple.driver.AppleLPC          1.6.0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.CSRUSBBluetoothHCIController          4.0.8f17
    com.apple.iokit.SCSITaskUserClient          3.2.1
    com.apple.driver.AppleRAID          4.0.6
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.1.0
    com.apple.driver.AppleFWOHCI          4.9.0
    com.apple.driver.AppleAHCIPort          2.3.1
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleIntel8254XEthernet          2.1.3b1
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleUSBHub          5.1.0
    com.apple.driver.AppleUSBUHCI          5.1.0
    com.apple.driver.AppleUSBEHCI          5.1.0
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.4
    com.apple.security.TMSafetyNet          8
    com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
    com.apple.driver.AppleBluetoothHIDMouse          175.9
    com.apple.driver.AppleHIDMouse          175.9
    com.apple.driver.IOBluetoothHIDDriver          4.0.8f17
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.driver.DspFuncLib          2.2.5a5
    com.apple.nvidia.nv40hal.G7xxx          7.0.4
    com.apple.NVDAResman.G7xxx          7.0.4
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.driver.AppleHDAController          2.2.5a5
    com.apple.iokit.IOHDAFamily          2.2.5a5
    com.apple.iokit.IOAudioFamily          1.8.6fc18
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleGraphicsControl          3.1.33
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleSMC          3.1.3d10
    com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
    com.apple.driver.IOPlatformPluginFamily          5.1.1d6
    com.apple.kext.triggers          1.0
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
    com.apple.iokit.IOBluetoothFamily          4.0.8f17
    com.apple.driver.AppleUSBHIDKeyboard          160.7
    com.apple.driver.AppleHIDKeyboard          160.7
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.0
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOATAPIProtocolTransport          3.0.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
    com.apple.iokit.IOFireWireFamily          4.4.8
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.iokit.IOATAFamily          2.5.1
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOUSBFamily          5.1.0
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.11
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          331.7
    com.apple.iokit.IOStorageFamily          1.7.2
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    Model: MacPro1,1, BootROM MP11.005C.B08, 4 processors, Dual-Core Intel Xeon, 3 GHz, 5 GB, SMC 1.7f10
    Graphics: NVIDIA GeForce 7300 GT, NVIDIA GeForce 7300 GT, PCIe, 256 MB
    Memory Module: DIMM Riser A/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz, 0x802C, 0x39485446363437324A592D36363742344433
    Memory Module: DIMM Riser A/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz, 0x802C, 0x39485446363437324A592D36363742344433
    Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8319, 0x4D4B435333385554412D4944542020202020
    Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 667 MHz, 0x8319, 0x4D4B435333385554412D4944542020202020
    Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Ethernet 1, Ethernet, en0
    PCI Card: NVIDIA GeForce 7300 GT, sppci_displaycontroller, Slot-1
    Serial ATA Device: ST3250824AS  Q, 250.06 GB
    Serial ATA Device: SAMSUNG HD501LJ, 500.11 GB
    Serial ATA Device: WDC WD10EADS-00M2B0, 1 TB
    Serial ATA Device: WDC WD10EADS-00M2B0, 1 TB
    Parallel ATA Device: SONY    DVD RW DW-D150A
    USB Device: hub_device, apple_vendor_id, 0x911d, 0xfd500000 / 3
    USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd520000 / 5
    USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfd522000 / 6
    USB Device: Apple Cinema Display, apple_vendor_id, 0x921d, 0xfd530000 / 4
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0608, 0xfd400000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
    FireWire Device: built-in_hub, 800mbit_speed
    FireWire Device: iSight, Apple Computer, Inc., 200mbit_speed
    FireWire Device: unknown_device, unknown_speed

    Kernel panic, machine check, uncorrected error correlates very strongly with RAM memory errors.
    Time for a Memory upgrade.

  • Can anyone please help with this problem... (home page access)

    read other articles and here is some data for your to go over.
    =====================================================================
    SQL*Plus: Release 10.2.0.1.0 - Production on Tue Nov 28 09:37:18 2006
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> connect / as sysdba
    ERROR:
    ORA-12631: Username retrieval failed
    SQL>
    ==================
    C:\>lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 28-NOV-2006 08:19
    :39
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
    ction
    Start Date 27-NOV-2006 16:14:11
    Uptime 0 days 16 hr. 5 min. 27 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Default Service XE
    Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
    dmin\listener.ora
    Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
    og\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=jantar)(PORT=15
    21)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    Also netstat does not show anything running on port 8080.
    ============================================
    C:\Documents and Settings\N0139838>net start
    These Windows 2000 services are started:
    Alerter
    COM+ Event System
    Computer Browser
    DHCP Client
    Diskeeper
    Distributed Link Tracking Client
    Distributed Transaction Coordinator
    DNS Client
    EPAService
    Event Log
    Infrared Monitor
    Logical Disk Manager
    Machine Debug Manager
    Messenger
    Net Logon
    Network Connections
    OracleServiceXE
    OracleXETNSListener
    Plug and Play
    Print Spooler
    Protected Storage
    Remote Access Connection Manager
    Remote Procedure Call (RPC)
    Remote Registry Service
    Removable Storage
    RunAs Service
    SafeBoot Configuration Manager
    SavRoam
    Security Accounts Manager
    Server
    SMS Agent Host
    SMS Remote Control Agent
    SU Service
    Symantec AntiVirus
    Symantec AntiVirus Definition Watcher
    Symantec Event Manager
    Symantec Settings Manager
    System Event Notification
    Task Scheduler
    TCP/IP NetBIOS Helper Service
    Telephony
    Windows Management Instrumentation
    Windows Management Instrumentation Driver Extensions
    Windows Time
    WMDM PMSP Service
    Workstation
    The command completed successfully.
    ===========================================
    Ping 127.0.0.1 or localhost is successfull.
    ===============================================
    C:\Documents and Settings\N0139838>netstat -a
    Nothing is running on port 8080.

    Hi,
    Have you install Oracle XE as an Administrator or member of Administrators group?
    Have you ever started the Oracle home page?
    Do you have any other Oracle installation?
    What kind of OS do you use? I can see Windows 2000.
    Those two services OracleServiceXE and OracleXETNSListener are enough to run XE.
    You could check by the Task Manager:
    - OracleServiceXE should be about 50K
    - OracleXETNSListener – 6K
    Turn those services to Manual. Restart the computer and Start Oracle database.
    You can check the LISTENER.ORA. Host should be your host name. Same into TNSNAMES.ORA. If the HOST = YourComputerName there are OK.
    Then you should check for any firewall. For instance, Zone Alarm could prevent to access your database.
    I hope that would help.
    Konstantin

  • My video recording sounds not working but other sounds are working fine, I've tried clearing the little mic thing near my earphone hole and had no success can someone please help me out?

    hhi guys
    my video recording sounds not working at all but it's working for other things such as music. I've tried to clear my sound thing near the earphone hole but had no success can someone please help me out?

    Had an Iphone 4 for about 3 months now. This happened to the first one I had and they ended up having to replace it at the apple store just a couple weeks ago 6/2. It happened again last night to my new one. This time i was able to correct it by going to itunes, backing up the phone to icloud, and then restoring the software. Mine did not work with voice memo, but did work with headphones plugged in, and would also work on speaker. I could hear callers but they couldn't hear me. I had purchased a new case (lifeproof case at $79.99) because it comes with plugs that cover the headphone jack, and the charging port, and is also waterproof. I heard that the root cause is due to lint, dirt, etc getting inside the headphone jack. Well, must be something else. It's a 10 days old phone, and has been in this overpriced case the whole time, and I have not used the headphones. I hope this doesn't keep happening.

  • TS1368 I am recieving the following message when attempting to sign into my iTunes store - An unknown error has occurred. can someone please help me I have reset my password but still unable to log in. help!!

    I am recieving the following message when attempting to sign into my iTunes store - An unknown error has occurred. can someone please help me I have reset my password but still unable to log in. help!!

    I am recieving the following message when attempting to sign into my iTunes store - An unknown error has occurred. can someone please help me I have reset my password but still unable to log in. help!!

  • My router internet connection won't except googles 8.8.8.8. dns why can someone please help me, my router internet connection won't except googles 8.8.8.8. dns why can someone please help me

    my router internet connection won't except googles 8.8.8.8. dns why can someone please help me, my router internet connection won't except googles 8.8.8.8. dns why can someone please help me

    naaa didnt work if you or any body else has any other ideas im open cuase now im thining about just taking it into apple and getting a new one but my friend said that he recently did the exact same thing and the apple store declined him cuase it was jailbroken sooo i really dont know what to do ....the purpose of getting the knew ipod was to have imessge and the new facetime and know that it isent working i dont know what to do or how to do it the correct way...............but thnk u Eric Ross and llaass

  • External Hard Drive(ERROR CODE 0) .DMG Back Up Issues. How to get more than 4gbs in .DMG back ups.

    I am currently using a my external hard drive for my late 2009 Mac Mini, my brothers MBP and my sisters HP laptop. I have a Western Digital My Passport 1T external Hard Drive to back up all are information. I formatted it to work on mac and pc and its on the "MS-DOS(FAT) setup at the momment. Im trying to back up DMG files from my HDD hard drive in my computer to the External Hard Drive to pass them onto my brother. I understand the whole part of me getting the "Error Code 0" where i can only put 4gbs of storage for that. I wanted to no is there a way for me to format my external hard drive for it to work on a Mac and a PC but for me to also transfer my .dmg files with more than 4gbs of that storage to my external hard drive?
    p.s Im running on OSX 10.6.8 and the DMG files are alittle more than 4 gbs. From 5-10gbs. Thank you for all the replys. It helps me out and others in the Apple community out!

    Hi, Steve. Your proposed procedure is just fine until you get to this point:
    ...reformat the WD to be Mac friendly *and reformat in FAT32* ...
    Reformatting the newly-reformatted Mac-friendly drive as FAT32 will, as you say, simply put you back where you were before, but with your data on a different drive. Omit that step, and you'll have a Mac-friendly drive that you can copy your data back onto.
    If you normally work with files exceeding 4GB in size, you won't want any hard drive in FAT32 format. If for some reason you'd like all your external drives in NTFS format, download and install the NTFS-3G driver, which will enable your Mac to read *and write to* that disk format.

  • Can Someone Please Help with Email Setup!

    I know it maybe a sin, but I have a hotmail account, I been trying to on my Iphone. It doesn't seem to be working, can some please help me out

    you cant set it up in your mail app on your iphone to my understanding... Microsoft did not make this easy, since it needs a plug in on your computer to work and does not use standard pop3 protocals. Blame Microsoft not Apple on this one
    My suggestion
    Bookmark and use http://mobile.live.com to check your Hotmail account, it is designed for mobile phones and loads quick

  • My new ipod touch 8gb is only registering as a camera.  can someone please help with syncing it with my old nano

    I have a new 8gb Ipod touch and I am trying to sync my old nano onto it.  But, when I am registering the new Ipod touch, it is recognising it as a camera.  Can anyone please help?  Many thanks in anticipation

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • I just got a new iPod nano, and I'm really excited about it, but I have a problem. A long time ago, I changed the email address on my account, and now all the songs from that account are gone. I don't know how to get them back. Can someone please help me?

    This is really frustrating, I've been trying to get my songs back for hours

    When you say "account," do you mean your iTunes library, because your iTunes library is what is on your computer?  Your iTunes library does not have an email address.  An account that is related to iTunes is your Apple ID (which is an email address) and you use it as your user name to sign in to the iTunes Store, to make purchases.  Changing your Apple ID will not make songs disappear from your computer's iTunes library.
    If you had an Apple ID and used it to make song purchases from the iTunes Store, and then started using a different Apple ID, you should be able to re-download the songs purchased with the old Apple ID.  In iTunes, sign in to the iTunes Store using your OLD Apple ID (and password).  That may not be your current email address, but Apple uses it as your user name, so it does not matter.
    On the iTunes Store Home screen, click on Purchased under QUICK LINKS.  This takes you do the Purchased screen, where you can re-download previous song purchases (for that Apple ID) at no cost. 
    NOTE:  If those song purchases are from more than a few years ago, you may also need to authorize your computer to play (and sync) songs for your old Apple ID. 
    For songs that were not purchased from the iTunes Store, if they are also gone, you cannot get them back unless you have a backup (or they are still loaded on your old iPod).
    If that's not what you mean by "changed the email address on my account," please post back with more details.

  • Is it possible to use an external hard drive to use the music collection at home and at work?

    I recently started using iTunes both on my home notebook as on my desktop computer at work. I also discovered it is not possible to download the songs I bought on both machines. It's a pitty, but I can understand Apple's point of view.
    I was thinking of bying a small portable USB powered hard drive to store my music collection on but I'd like to know whether this is possible before I buy myself a USB drive only to find out it's a waste of time and money. I assume it is possible the USB drive is assigned a different letter on each machine, but I think I can work around that. But is there anything else I need to keep into account?

    Sync iPod/iPad/iPhone with two computers
    Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
    I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans with iTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
    As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
    When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entires and import the local content you have on that box.
    tt2

  • I give up.  Can someone please help with pf24 on Canon?

    I thought I understood how to do this but I don't. I have tried several things but the result doesn't look right to me. I have a Canon Vixia HG21 and today I recorded a little with the pf24 mode.
    After converting to apple pro res 422 in FCP 7.0, I exported through compressor using Apple Pro Res for progressive material, changed the video settings in the inspector to custom 23.976 frame rate, and turned on frame controls and set deinterlace to reverse telecine. It shows up now as a 23.976 file in quicktime but still looks bad on my monitor, especially when I pan. It's as almost there is ghosting trails. I see this on my external monitor as well, which is a little Vizio HDTV connected HDMI from my Black Magic intensity card.
    I then tried cinema tools, and tried their reverse telecine, after guessing at several different options to choose from. The conform button and selecting 23.98 didn't help me either. I am willing to upload the short clip to my mobile me account if someone wants to download and try removing the pulldown for me. I am just stumped, and really want to figure this out. Maybe I am doing it right, and that's just how the quality of the pf24 looks like, but I doubt it.
    Someone please let me know if you can help.
    Thanks!

    Try it without deinterlacing/reverse telecine.

  • Can someone please help with my Galaxy S3

    I have my phone set up to read texts when they are received. I think this is because I have 'driving mode' turned on. I like this feature very much. My problem is, with driving mode turned on every time I get a call or text or simply turn on my screen, the phone delays speech for a few seconds and then tells me the time and temperature. If I have an incoming call or text message the phone will tell me the time and temperature at the same time the text is being read which makes it very difficult to understand the text until the time and temp stops. Is there any way to make my Galaxy S3 stop speaking the time and temp but still speak the rest?

    Thanks for your reply. I have driving mode on. I removed the Accu Weather widget from my home screen and looked in my Apps and it's not there anymore, however; when I press the key to turn on my screen it's there until I unlock the screen. Then it disappears but it still reads the time and temperature. This is extremely annoying. I want it to read to me...just not the time and temperature.

  • Pretty new to Java can someone please help with an addObject() problem?

    Hi I'm pretty knew to programming and I have an assignment which I've been working on but I am stuck
    I have to create a 'space invaders' style game, and I've got some basics working. I wanted to add a boss enemy, which appears when all other enemies have been destroyed. It kind of works, only the program spawns a seemingly infinite amount of the boss which then creates a 'wipe' effect across the top of the screen.
    Here is my code:
    import greenfoot.*; // (World, Actor, GreenfootImage, Greenfoot and MouseInfo)
    import java.util.List;
    public class Space extends World
    * Constructor for objects of class Space.
    public Space()
    // Create a new world with 200x250 cells with a cell size of 3x3 pixels.
    super(200, 250, 3);
    //add class with starstreaks
    addObject(new EmptyBox(),1,1);
    //add player character
    addObject(new Player(), 100, 228);
    //add 4 romulan enemies row 1
    for(int i=0; i<4; i++){
    addObject(new Romulan(), (25 + 50 * i), 15);
    //add 3 klingon enemies row 2
    for(int i=0; i<3; i++){
    addObject(new Klingon(), (50 + 50 * i), 40);
    //add 4 romulan enemies row 3
    for(int i=0; i<4; i++){
    addObject(new Romulan(), (25 + 50 * i), 65);
    //add 3 klingon enemies row 4
    for(int i=0; i<3; i++){
    addObject(new Klingon(), (50 + 50 * i), 90);
    //add 3 shields
    for(int i=0; i<3; i++){
    addObject(new Shield(), (30 + 70 * i), 180);
    *public void act(){*
    List<Enemy> enemies = getObjects(Enemy.class);
    *if(enemies.size()==0 ){*
    addObject(new Borg(), 100, 30 );
    I believe the part in bold is the problem, but I dont know why. Klingon and Romulan are subclasses of the Enemy class. The Borg class is it's own seperate class, but with the exact same functions as Enemy. I made it seperate as I figured it would keep respawning if it was a subclass of Enemy.
    Any ideas?

    Its ok, after more than an hour I've got it.
    I simply added private int bossValue = 0; at the beginning and then changed act to this:
    public void act(){
    List<Enemy> enemies = getObjects(Enemy.class);
    if(enemies.size()==0 && bossValue==0 ){
    //for(int i=0; i<1; i++){
    addObject(new Borg(), 100, 30 );
    bossValue =1;
    }

Maybe you are looking for

  • Allowing a user to save changes

    I am creating an app that is something similar to this one:- http://demo.quietlyscheming.com/DragTile/DragDrop.html However what I want is when a user drags an item from one tilelist into the other tilelist for them to be able to save these changes s

  • High definition output without Blu-ray

    I work with CS3 Production Suite (Ae, Pr, En etc), have Blu-ray display equipment (deck and TV), but do not (yet) have a Blu-ray burner.  I've created a 1080p30 project in After Effects and would like to view it in best possible resolution via a norm

  • Create PDF button gone from Excel worksheet

    Recently had to restore computer back to factory. I installed full CS4 WebSuite which includes Acrobat. I used to have a PDF button in Excel that would let me create a PDF from an Excel worksheet. How do I get that back? I used to use Office 2003 and

  • Manuals of ABAP academy in spanish

    Hi. I need to find the Manuals of ABAP academy in spanish. Someone help me? Thanks, María C.

  • DP related queries

    Hi Gurus, In Demand Planning, can we use the same data view for different users? Is it possible to keep certain rows input-able for some users and other cant in the same view? Can we use the same macro for different planning books in the same plannin


HashFlare