I have just updated itunes to 10.7 and now my videos and flims will not play. I get a message saying itunes has stopped working. Can you help

I have just updated itunes to 10.7 and now my videos and flims will not play.

This helped overcome the crash problem, but (as reported before), I still have to start iTunes in Safe Mode in order to watch any videos. This has been the case since 10.5.
The regular mode behavior has changed a bit - instead of the progress bar moving to the end of the video, showing no video but playing the audio for about three seconds, it now leaves the progress bar where it is ... but the rest of the behavior hasn't changed.
Windows 7 Professional, 64 bit on an HP dv8t quad-core laptop w/ 8 GB RAM, running nVidia GeForce 230M with 1 GB video RAM.
Thanks for your prompt response to the original problem posted above. At least now I'm back where I started from before I upgraded to 10.7. Not optimal, but I've finally gotten used to doing a Ctrl-Shift-click to run iTunes.
Scott

Similar Messages

  • I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

    I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

    Try updating the printer driver.

  • Just restored and updated my ipod and now when I connect it to my computer I get a message saying "this ipod cannot be used because the Apple Mobile Device service is not started" what does this mean?

    Just restored and updated my ipod and now when I connect it to my computer I get a message saying "this ipod cannot be used because the Apple Mobile Device service is not started" what does this mean?

    I'd start with the following document with that one:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.)  I gave the Airport a hard re-start, so I don't think that is the issue.  Using Windows 7.

    Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.)  I gave the Airport a hard re-start, so I don't think that is the issue.  Using Windows 7 Ultimate

    Looks like I fixed it., thanks to another post I read.  I went into my Norton Security.  Under Settings. Chose Firewall. Program rules. changed the itunes setting from "auto" to "allow"  This also fixed my error (-3212) which would not allow me to connect to the iTunes store. 

  • TS3212 When I try to start Itunes, I get the message" program can't start because MSVCR80.dll is missing from your computer - try reinstalling the program".  When I try to reinstall I get the message Error 7 (Windows Error 126) - can you help me?

    When I try to start iTunes, I get the message "program can't start because MSVCR80.dll is missing from your computper.  Try reinstalling the program."  When I try reinstalling, I get the message Error 7 (Windows Error 126)
    Can you help me?????

    Hello Charleen,
    It sounds like you are unable to reinstall iTunes because of this error message 7. I recommend the troublehsooting found in the following article that mentions that error named:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I have Photoshop Elements 11 installed on my PC, and now it flickers on startup of the Editor, then closes on its own with a message saying it has stopped working.

    Photoshop Elements 11 has been working for over a year, and now suddenly it flickers on startup, then closes with a message saying it has stopped working.
    Is there a repair option to fix it?

    I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
    You can't "copy" your photos to the "library manager", there is just no way to any such thing.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • ATV will play movie extras and all other content. Put will not play the movie it self! iTunes is currently unavailable. Try again later. Shows up every time!

    ATV will play movie extras and all other content. Put will not play the movie it self! iTunes is currently unavailable. Try again later. Shows up every time!

    Did you activate home sharing in both your iTunes and ATV?
    Also try signing out of the ATV (Apple ID) and signing back in again.

  • My mac will not turn it 'y 3 short beep   3  long bip   3bip , can  you help me  please, i have one imac 27 i7.

    Hello,
    My mac will not turn it 'y 3 short beep + 3  long bip + 3bip , can  you help me  please, i have one imac 27 i7.
    Thank you

    Hey ,
    Thank for your replyI triedwith another new ram but still the same problem.
    I will first explain how it began.
    I put my imac in the box and then I store them in my attic.
    Shook it possible that when I put my imac to loft the boot is clear due to cold ?
    Thank you

  • Since installing 3.6.12, firefox crashes continuously...I have gone back to Windows Explorer because firefox does not run anymore. Upon any actioin in firefox, the screen goes white and freezes and I get an error message saying firefox has stopped working

    just about any action in firefox will cause a "WHITE SCREEN" freeze up and then an error message stating that firefox has stopped working. This happens in EVERY sessioin of firefox.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • I am getting itunes has stopped working, can anyone help

    I am getting "itunes has stopped working"

    This Apple article will help you isolate the problem a little -> iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    Does iTunes start in Safe Mode?
    Open iTunes in Safe Mode to isolate any interfence with plug-ins or scrpits not manufactured by Apple.
    Hold down the Shift and Control keys while opening iTunes. If performed correctly, you should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
    After clicking Continue, determine whether the issue you were experiencing persists in Safe Mode.
    It would also be helpful if you can provide the Error Report from the Windows Action Center Reliabilty History. To view this go to Control Panel > All Control Panel Items > Action Center > View Reliability History under Maintenance. Double click the iTunes critical event and copy it into your reply.
    If you run into problems, see b noirs walkthrough in this thread -> Windows Apple Mobile Device

  • I installed the new itunes 11.0.4 on windows and now some of my movies will not play

    Some of my movies will play in itunes, but some of them make it crash and I have played them previously in other versions of Itunes.  Is anyone else having the same trouble?  Also, it is putting some of my movies in the home video file and not the movie files.  Any suggestions on that?  thanks

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

  • I have an ipad 2 and some area's of the screen has stop working, can anyone help?

    hi my ipad 2 screen has stopped fuctioning in parts of the screen when my ipad is tilted on its side and the keyboard is up some letters wont respond as quick as the others, its continuously the same letters, can anybody help solve this problem, i dont know if its a hardware problem or a software issue :/

    Do the letters not work whichever app you are in e.g. Mail, Notes, Safari ?
    Have you tried a reset to see if the entire screen works when the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If that doesn't fix it then you could try restoring to your last backup, and next after that would be resetting back to factory defaults. If it still doesn't work then it is possibly a hardware issue, in which case you should contact Apple.

  • Firefox updated last night and now when I click on an external link I get a message saying "There was a problem sending the command to the program".

    I've tried opening a link to a POP3 email account off of a messenger program as well as other site links sent to me through a messenger program. I get the same message, each time.
    Also links sent to me in Thunderbird do not open in a browser window.

    To help other users find solutions, please return to this Thread and '''Sign-in''' to the
    forum with your Username and Password:
    click on '''"Solved It"''' Next to the reply ABOVE that '''BEST''' solved your question
    '''DO NOT click "Solved It" next to this reply

  • HT1527 I am running windows 8.1.  Whenever I try to connect to the ITunes Store, I get a message that windows has stopped running and the program shuts down

    I am running windows 8.1.  Whenever I try to connect to the ITunes Store, I get the message that windows has stopped working.  I have unistalled Itunes ran an update to the windows 8 for any updates.  I then reloaded ITunes and the same thing happens.  Any suggestions?  Thanks

    Hi tonymontenegro!
    I have two articles that will help you troubleshoot this issue. First, an article on unexpected application quits with iTunes:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    This next article can help you troubleshoot this as an iTunes Store connection issue:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • ITunes will not up date get a messge saying problem with installer packge

    itunes will not up date get a message saying problem with installer packge

    TRy the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Maybe you are looking for

  • Open the report

    how can I open the report run time

  • Don't want to update firmware, but AEX keeps blinking

    Hey all - unlike a good majority around here, the 7.5 firmware of my AEX has been rock-solid and I really don't want (or need) to update it to 7.5.1 for fear of it going haywire. My Macs, iPhones, iPad, even the PCs all have no issues with AEX. But A

  • Error  can't  be transferred because file name is too long ...

    Audio books and songs total of 53

  • HELP  Regarding Problem Found during transportation

    Hi Experts I was transported my request from DEV  to PROD When i am Importing my Objects in Producton server System is throwing this Error. --Start of the after-import method for object type R3TR UPDR (Activation Mode) Info object VV00B is not availa

  • 2 into 1 ?

    I have a Lowe TV - incredibly expensive with excellent picture BUT it has only 1 HDMI input socket and I've currently got a BluRay player using that. Is there any device which will let connect the HDMI output from an Apple TV as well so I can use bot