I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown. Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching f
I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown.
Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching for my network by name and continues to run and run without finding the network.
Prior to updating to iOs 6.3.1 my system worked perfectly.
Can anybody help please.
1. Turn off router for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
Similar Messages
-
Please help, having just updated my iPhone 4 to IOS 6.1.2, everything is where i left it regards to contacts, music and apps, but my photos have gone. Please please can someone tell me where to find them/get them back.
Did you do File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11) to copy your iTunes purchases over to your computer's iTunes prior to updating ? iTunes downloads (apps, ringtones, music, films, tv shows, ibooks) aren't included in a backup, only the contents and settings of third-party apps.
You should be able to re-download apps and, depending upon what country that you are in, potentially music : re-downloading. Ringtones are a one-time only download, so if they aren't on your computer nor on a backup then you will need to try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
i have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?
This is not my problem. However, I think it may be related to an old speaker. I was using the 30 pin adapter for about a week after the upgrade to 7.1.2. But I think with the update the speaker won't work anymore. I will try with a new speaker system. Thank you for trying to assist.
-
I have just updated my iphone to IOS but can't close the apps I have open, I used to send them into wiggle mode then close but now I have updated they won't wiggle they just open up again................HELP
shartez wrote:
.. can't close the apps ...
How to Close Apps
Double Tap the Home Button... Then swipe the App (not the icon) Upwards... Tap the Home Button when finished.
From Here > http://support.apple.com/kb/HT4211 -
I have just updated my iPad to IOS 8.1.3 when I now try to open the emails nothing comes up and then the app crashes and returns to the home page. What should I do?
Since yesterday morning about 11:00 I have been having TERRIBLE email problems on this iPad 3G. Email comes in (I hear the sound) but nothing displays -- no folders, no content, no nothing in e-mail. The blank email screen shows up and then disappears after about 10 seconds, taking me back to the Home Screen.
Right now, the only way I can see email on this device is to log onto AOL via the AOL app.
I have been doing a lot of online reading about the problem. It has to do with iOS 8.1.3 and it affects older iPads and iPhones. I'm having no problems on my iPod touch, which -- fortunately -- is so old it cannot update its iOS 6.
I waited to update the iOS on this iPad until iOS 8 was "mature." That was about 2 weeks ago.
Anybody know know if Apple is aware? working on a solution? -
Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate
Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate
Try resetting your iPad:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings. -
I just updated my 4S with iOS 8.1.1 and now my screens are not proportioned correctly - just a bit to long and wide. Is there a way to adjust? Or go back to 8.1?
lisan1234,
I am sorry to hear about the screen issues. To clarify, do you only notice the screen proportion difference when in a certain application? By to long or wide are you stating that parts of the screen images are cut off? Please provide details
LindseyT_VZW
Follow us on Twitter @VZWSupport -
just updated my iphone with iOS 7.0.2 and when I call or people call me, only one party can hear the other. Would you know how to fix this problem? Thanks
Hi Apple_Mom,
Thanks for visiting Apple Support Communities.
If you've noticed issues after updating to iOS 7.0.2, you may want to first update to iOS 7.0.3 which was recently released.
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If the behavior persists, the troubleshooting steps in this article can help:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Cheers,
Jeremy -
Ok, so I have just updated my iPad2 to the latest OS and I have lost my paid magazine subscriptions. How do I re-establish the link so that I don't have to subscribe and pay all over again?? this is frustrating as I also had to reload alot of non-supplied apps (games mostly). I also lost all of my contacts content.
Put them back the same you did originally. Connect your iPad to your computer via USB and re-sync the music you want back to your iPad using iTunes.
-
Just updated my iPad with iOS 7.0.3 > my iTunes music downloads are messed up....the regular tracklist of the albums are in chaos, can someone help me out to get them " in line" again!?
Well I basically answered my own question. I just ended up deleteing the tracks from the albums missing artwork (I highlighted all of them and right clicked delete) then just dragged over the album again that had the artwork already set and it worked like a charm.
Couldn't figure out any other way to do it. Still open to ideas for the future if anyone has any. -
I just updated my iphone with iOS 5 and all my photos in my Camera Roll are gone. What gives...
I just update my iphone with the new iOS 5 and all my photos in my Camera Roll have disappeared. I did use iTunes for the upgrade. Are the photos in another place?
If you have failed to make sure that any apps purchased on the iphone were transferred to your computer before updating, then you will have to redownload.
Open itunes store, click Purchased, under Quick Links. -
I have just updated my mac with the latest software the brightness now docent work on the f5 f6 keys
I have just updated with the latest software 7.1.1 the f5 f6 buttons now dont work to brighten the screen, it works if I use display in system prefrences
Try a SMC reset:
http://support.apple.com/kb/ht3964
What are your settings in System Preferences>Displays>Display?
Try putting your finger over the light sensor. What happens with the back lighting?
Ciao. -
TS3899 have just updated iphone 4 to ios 7 and my inbox has disappeared hoe do i restore it
have just updated my iphone 4s to ios 7 and my inbox has disappeared from my email mailboxes, how do i restore it?
Thank you Chris for your speedy response.
I seemed to have resolved the issue just before your reply but in truth I don't know how??? I obviously, unwittingly, tapped/selected the right buttons which appear to have restored the Inbox. The mailboxes are not in their original order but I'll settle for having the Inbox back for now.
I shall bear in mind your suggestion for the future.
Thank you -
have just updated to ios 6. this has really screwd up my contacts. how can i get back to where i aws???????
Hi ckuan,
Thanks alot for the advice - great to see there are so many helpful people out there . Anyway, I followed your instructions and although some of the apps transferred from i tunes to my iPad the first time, unfortunately some of the apps that I selected to transfer (which were purchased) did not transfer. There were only a few but it would have been great to have got them back onto my iPad!
Chow for now! -
I have a Bose soundtouch system .Until today I could play my iTunes music through it via air player . .I have just uploaded the latest upgrade from iTunes and now I am unable to connect to the Bose system . Can anyone help please? I can connect via my iPad and by using the Bose app so it is not the Bose at fault
@puebloryan, I realize this thread is a bit old, but I have encountered a similr problem and wondered if you had found a solution. I've been using home sharing from itines on my PCs for years, but two days ago, it suddenly stopped. I can share from my Macs, but not from the ONE PC library where I keep all my tunes. I tried all the usual trouble-shooting measures.
After turning home sharing off on the PC's iTunes, turning it back on and turning some other settings off and on, my Macs and Apple TV could briefly "see" the PC library, but as soon as I try to connect -- the wheel spins for a bit and then the connection vanishes. It's as if they try and then give up.
Since this sounds so similar to your problem, I was hoping you finally found a solution. I am also starting a new thread. Thanks!
Maybe you are looking for
-
Why does my temp on my weather icon say 23?
Why does my weather icon say 23 when my other iphones say 72degrees as the main icon? Is there a setting I need to fix to have it say 72? All my temps are set to farenheit...this bugs the **** out of me. please help.
-
Error while installing Oracle 11g R2 RAC
Hi, I am getting following error while trying to provide Oracle software locatio. [INS-20702] Unexpected Internal driver error Cause - A call to cluster verification utility failed. Following are the steps i have followed: 1. Using NFS mount created
-
Best way to apply same effect to multiple clips?
I have a bunch of short clips in the timeline. I want them all to end with a "fade to black" and I want the audio to fade to 0 db. I know how to do this by applying the "fade to black" and then applying 1/2 a crossfade 0db. Is there a way to apply th
-
Execution of Clob through dynamic sql
Hi, Here in below code.I am trying to execute the CLOB dynamically.Its giving an error as ORA-6502 Numeric or value error. Declare SQL3 CLOB := ''; SQLSTRING1 LONG; SQLSTRING2 LONG; SQLSTRING3 LONG; Begin SQL3 := GENUPD(RECTABLE => 'REC_TARGET_TABLE'
-
Showing Dynamic parameters depending on Static parameter
Post Author: Relais CA Forum: General Is it possible to show dynamic parameters depending on the selection of the static parameter?For example, I would like to show a dynamic list of Departments, only if u201CDepartmentu201D is selected from the stat