I have logic pro studio 8 and the upgrade, however it will not upload on my mac book pro. It says i need a product key for the logic 9 and it come with one.
I have logic pro studio 8 and the upgrade (logic pro 9) and it will not load up to my new mac book pro. Its asking for a product key for the logic pro 9 upgrade and there wasn't one in the box. i need some help
Contact AppleCare... Explain you are a Logic User and you should be transfered to a Product Specialist to assist you with your Issue.
Similar Messages
-
i can connect my tc to the internet and back up my iMac, but it will not back up my mac book pro... ANY thoughts?
When I go to connect my MBP, it says I have the wrong user name and/or password; however the names and password are the same on both computers.
The MBP connects smoothly to the internet, just not the TC.
Does this help?
There is no login name required to get internet unless you are running a vpn or pppoe client.
The wireless uses a security key.. but that is fixed in the wireless setup.. so no user login should be required at any time.
It sounds to me like you have the wrong setup.
Please do a screen shot and post it of the imac setup that works.. show us the airport network with its ip address and where you are putting in the login.
Please also do a snapshot of the TC and how it is setup.
What broadband do you have?
Is the TC a router or bridged? -
Battery will not charge on my Mac Book Pro.
I recently (as in, a few months ago) replaced the battery on my Mac Book Pro, because I had overcharged my previous one into oblivion. Since I replaced the battery, however, the computer has been working fine - until today, anyways. The computer will not work without being plugged into the charger, and when it's on, it insists that the battery needs replacing, despite having a cylce count in the 80's. In the spirit of full disclosure (and getting help with this issue), I will mention that there is some small damage on one of the corners on the laptop. I don't know how the damage was caused, I just woke up one day and it was there, but I doubt this has any relevance, as the damage is nowhere near the battery. Regardless, any possible solutions would be greatly appreciated, as I would prefer to not replace a (relatively) new battery.
1. I suppose it wasn't over-charging per se, but instead just that I used it too much while the charger was plugged in and the battery was at full, which can kill your battery.
2. The damage I described happened unbenkownst to me, therefore, as far as I'm concerned, it was fine one day, and damaged the next.
3. I realize the damage may have relevance, but said damage would then require a completel overhaul/replacement of the computer, seeing as that would likely mean the damage would be affecting the computer. I am more inclined to believe that the battery is, for some reason, not registering.
If I can't find an answer, I'll simply take it into a store to have it looked at, though obviously I'd prefer to explore simpler solutions, as the closest Apple Store is not close at all. -
AIM ichat will not sign in on Mac book pro/Lion. It always says error..?
mac book pros on lion will not sign in to ichat using a AIM. My computer was took to the genius bar and it could not be logged into ichat. everything was tried. they said it was probably a bug so can apple please fix it in the next update? thanks.
Hi TMSlattery,
Thanks for using Apple Support Communities. Based on the description of the issue, it sounds like your computer isn't able to reach the Mac App Store (iTunes Store) or iCloud servers. I would recommend the troubleshooting here:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Troubleshoot issues on a Mac
If you haven't been able to connect to the iTunes Store, a software conflict or your Internet service provider (ISP) may be blocking your access.
Update iTunes and Safari to the latest version.
If you have a firewall, your settings may be preventing you from connecting to the iTunes Store. Follow these steps to configure your firewall.
You may need to reset your keychain. Connection issues are occasionally caused by keychain issues. Learn how to use Keychain First Aid to resolve any issues with your keychain.
If you're receiving a specific error message, follow these steps.
If the issue still persists, contact your Internet service provider and confirm that these ports and servers are enabled over your network.
Cheers,
- Ari -
I have a new Macbook pro. I downloaded all previous Itunes purchases and then sync my IPhone. The New songs that I purchased today appear on the IPhone however it will not play. How do I fix the issue with my IPhone?
Hey Etti101,
I'd start off your troubleshooting process by deleting and redownloading the songs:
If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
Delete the purchased song that is exhibiting the problem from your iTunes library.
Click on the Purchased link in the iTunes Store to view your previously purchased music.
Download your previously purchased song from this list.
via: Songs in iTunes may not play back completely
http://support.apple.com/kb/TS4357
Regards,
Delgadoh -
Can I upgrade my iPad 1 to the ios5, and can I upgrade my snowleapord to mountain lion on my Mac book pro so that I can icloud my iPad, Mac book and iPhone 4s.pls help
Can I upgrade my iPad 1 to the ios5,
Yes.
... and can I upgrade my snowleapord to mountain lion on my Mac book pro
Maybe.
Read here for Mountain Lion's system requirements: http://support.apple.com/kb/HT5444 -
I have a HD video clip (MPEG 4), able to watch in VLC in my Mac-book-pro, but not in Quicktime player and FCP X - just seen as full green. Help please to view in FCP X by changing the format or what ever thats required. Thank you.
Thanks for your reply. This video was recorded by my own professional camera, Sony PMW EX 3, two years back. But I am neither a professional cameraman nor an editor. I am just like a beginner in both. I didnt have space in my storage device, so I just copied all my clips, thinking I can edit it latter, without recompressing or editing or whatever I should have done it at that point of time. Now I need to edit it and use it in my profession. I am very upset. Please help me in going step by step to get it in FCP X for editing. Also I would like to know, do I need to buy the Compressor 4 for any reason. I dont mind in buying, if you think it is going to be useful for some reason. Thank you very much in anticipation for any kind of proper guidance.
-
I have purchased the last Creative Suite available on disk. It will load on my old Mac Book Pro. I just bought a new Mac Book Pro and just realized there is no place to put a disk. Is there any way to load the programs to my new computer?
Buy an external optical drive such as the Apple USB SuperDrive that is made specifically for that model.
Use the optical drive of your old MBP to clone the DVDs to USB flash drives, then install from the flash drives.
Connect both computers to your local network and then share the optical drive to install the software. -
Can I use the IRig to plug in my guitar on my mac book Pro or it just works in ipad, ipod and iphone?
From their website:
Got a Mac? Get an iRig!
Now for the hidden features… if you have a newer Mac computer, you can use the iRig as an audio interface for it. The newer Mac models feature a headphone jack that act as a headphone/microphone input for headsets. This means that you can also use your iRig with your Mac laptop or desktop machine to take advantage of the higher processing power of your machine and you don't need an additional audio interface to use it. Simply plug the iRig into your headphone jack, plug your headphones/line out into your iRig and you've got a fully functioning audio interface for guitar/bass/keyboards, or any other instrument with a ¼" out. Pretty cool. -
my iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black. can anyone help me please??
christobell86 wrote:
... it will not restore my phone as i have got the app find my iphone switched on.
You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702 -
i have deleted all contacts in icloud but still have them on my iphone (which is backed up as well to iTunes) how can i restore the iphone data to the iCloud so it will resend it to my mac book and iPad? I have switched my iphone to airplane mode so it is not connected to the internet and so icloud can not wipe it at the moment.
thanks royThere's a menu choice (I think under "Files") that lets you sync purchased items on a device back to itunes. Look for that.
iCloud does not store music. If you want to do that you'd have to subscribe to itunes Match, but to get music to the match servers, you need the music in the itunes library on your computer. -
What are the security implications of having JAVA running on my Mac Book Pro?
What are the security implications of having JAVA running on my Mac Book Pro?
Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site. -
Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.
There is a US$10 adapter from old power adapter to new MacBook Pro.
MagSafe to MagSafe 2 Converter
The MagSafe to MagSafe 2 Converter allows you to use the MagSafe connector on your LED Cinema Display, Thunderbolt Display, or MagSafe Power Adapter to charge your MagSafe 2-equipped Mac computer.
For battery life, check the latest Software Update for the fix for most problems. -
Where do I get the serial number and product key for the version of AutoCAD LT for Mac that I bought from the ITunes store?
The iTunes Store doesn't sell software for the Mac. I presume you mean the Mac App Store. To the best of my knowledge, no software sold in the Mac App Store has serial numbers nor product keys. For what reason do you think you need them?
Regards. -
I need a domain key for the icrop app. Any ideas on how to find this?
I need a domain key for the icrop app. Any ideas on how to find this?
Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac
Maybe you are looking for
-
hi, i m a beginer for the xml and my question is that if we r adding our own tag that how the DTD or XSL(XML schema language) is approve that tag.And we r not design any dtd for our tag. in short how can i invent the tag in my XML file. plz give me a
-
I'm color correcting HD video for a film-out. I'm trying to preserve as much information in the blacks and whites as I can while increasing contrast. How should I use the waveform in this particular situation? Is it safe to push tight onto the 100/0
-
Error in codepage mapping for source system
Hi Experts, I am getting the following error while loading data from ECC only for Account COPA datasource. Error in codepage mapping for source system. Error text: Message no. RSDS_ACCESS013 Regards, Sandeep Sharma
-
Render HTML text as read-only field
Hi, I want to display the text entered in a rich text editor as "true" HTML in read-only mode. If I make the field read-only (Read Only = Always), the display is screwed up quite badly. Obviously CSS gets in the way somehow. Here's how to see my prob
-
How do i install my photoshop cs4 without a cd player?
I purchased a new macbook pro without a cd player and I want to install my photoshop CS4 that i had on my other mac. I have the CDs. What is the best way to do this.