I have mac air late 2009 model identifier 2,1 running os 10.6. i want to know can i upgrede it 10.8?

i have mac air late 2009 model identifier 2,1 running os 10.6. i want to know can i upgrede it 10.8?

Upgrading is rather simple.
First you need to enure you have enough free hard disk space. The quickest way to do this is to click on Spotlight (the magnifying glass at the top right corner of your screen) then search for and open an app called Disk Utility. Once Disk utility opens you need to highlight the second item on the left which is called MacintoshHD by default. Then look on the lower right for available disc space is gigabytes. You need a minimum of 8gb available.
Got enough space? Great. Next click on the Apple menu on the top right corner and select "About this Mac" and make sure you are running 10.6.8. If not click software update and install it.
Once you verify you are on 10.6.8 then click on the Apple menu at the top right and select the third item on the list called the App Store. Mountain Lion is on the lower right of the first page that loads. After that you click on the $19.99 then enter you account to continue. I assume you already have an itunes store account so use that for payment. As soon as the charge goes through it starts to download. Its about 4gb so it can take anywhere from 20 minutes to several hours depending on your internet connection speed.
If its going to take a long time you may want to go to the Apple Menu at the top right and select system preferances then Energy Saver on the second line. Then move the slider on the first line all the way to the right so the Mac will not go to sleep during the download. Also be sure to plug in the power cord. Once you upgrade this setting will be retained so when you are done you will need to go back and change this setting, its the same in the newer version.
When its done downloading it will ask you to install. Its pretty simple, you need to enter your Administrator password and agree to the liscense and click next a few times. Be sure to select Macintosh HD and not Recovery HD to install to. I wouldn't imaging the installation taking more than 15 minutes after it is done downloading.
Also if you chose not to install when its done downloading you can do it later. All you have to do is search spotlight for "Install OSX Mountain Lion". The app is in the Applications folder. Also be sure to make a backup before upgrading. It should go through OK but there is always a chance it will not.
Good luck!

Similar Messages

HT3964 I have macbook air late 2010 model... it works fine otherwise but it has started being overheated in normal situations where normally it used to work fine and draining more battery....... battery time is almost half now. should i reset SMC. Would i

I have macbook air late 2010 model... it works fine otherwise but it has started being overheated in normal situations where normally it used to work fine and draining more battery....... battery time is almost half now.
should i reset SMC... would it help?

I'm doubtful it's a missing driver too, but I feel as though it's driver related. The first time XP was installed, after first boot without installing drivers, it was without sound etc, but fundamentally the system worked. Now after first boot, it's very buggy. Thanks for your suggestion Tonny. I ran the tool but it turns out the HDD is fine. Besides, everything runs fine in safe mode.
Does anyone know if (generally speaking) there is any firmware on the graphics card that would get updated via a Windows update? i.e. is it possible that Windows update downloaded a driver for the graphics card that installed new firmware that wasn't all that compatable with XP?

Hello. On my Macbook air late 2013 model I am having a problem where microsoft word for mac just stops working for soon reason and at the screen where the document should be is just gray and does not even display the document. Does anybody have a fix?

Hello. On my MacBook Air late 2013 model I am having a problem with Microsoft office word for Mac where the window for the document becomes all gray and I can not see anything that I have typed or any menus for it and also windows will sometimes dissapear and I am having truble getting them back. If anyone has anyideas of what is going on or could even help me thank you.

Glad that helped.
As time goes by (months or years), keep your eyes on how long Microsoft continues to support Office 2011 for Mac. Eventually you should consider Office 365 or Apple's Pages, Numbers, and Keynote.

Accidentally reformatted the Mac Yosemite OS in my iMac Late 2009 model

Hi Guys,
I have a problem as mentioned above.
I installed windows using bootcamp last night on my iMac, the because I was on the phone, I accidentally reformatted the mac partition (Yosemite OS), so currently I only have the windows when I tried to open the iMac.
I tried the shortcut keys to do internet recovery, but my iMac wont simply allow as it is late 2009 model.
Can you help me on how can I re-install again the Yosemite os and use the remaining disk capacity?
Looking forward to your response.

Hi Eric,
THank you so much!
I am currently downloading yosemite in my macbook and the will create a usb bootable version of it.
So after this, i will just plug this in my imac and then a bootable installer will pop-up?
Can i just delete all the partition including this windows 7 and start a new one
will you guide me on the right process?
Looking forward to your response.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues. I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?

Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck!

HT3696 if i have a 15 inch Mac book pro 2009 model running 64 bit, can I increase the RAM to 8 Gig?

if i have a 15 inch Mac book pro 2009 model running 64 bit, can I increase the RAM to 8 Gig?

Yes.

TS2570 I have MacBook Air late 2011 with encryption enabled the mac froze so I just shut it down by pressing the power button .But the when I tried booting the gray screen appeared nothing else

I have MacBook Air late 2011 with encryption enabled the mac froze and I pressed the power button to shut it down but then the gray screen appeared no wheels nothing just gray. I tried all steps but nothing helped. Worse than that only the pram key combination works I cant get the cmd-r or just alt or any combination to work??? Any suggestions would help. Thanks!
P.s. I am on mountain lion with ssd encryption enabled. The mac froze when the internet stopped the one from the cable (I use ethernet usb one) when I turned wifi on it froze. I have disconnected everything when trying the steps except power cable.

Boot into Internet Recovery (command-option-R at the startup chime) and try to repair the boot volume in Disk Utility. You will have to unlock the volume before you can do anything with it.

My Late 2009 Model 10,1 running 10.8.5 frequently acts as though I have pushed the F11 button, but I haven't. The cables are not loose. Gently touching the mouse will get the screen back, but often it immediately goes to the F11 mode.

My Late 2009 Model 10,1 running 10.8.5 frequently acts as though I have pushed the F11 button, but I haven't. The cables are not loose. Gently touching the mouse will get the screen back, but often it immediately goes back to the F11 mode. Is this a hardware or software issue? How can it be fixed?

I called Apple. The problem was caused by settings in Mission Control. After changing all 4 of the Hot Keys (if that's the proper term) shown in the bottom half of the Mission Control window in System Preferences to "-" by clicking on the drop down menus, the problem went away. Apple's help was excellent!

I have mac air laptop 10.5.8 and need to upgrade. Which leopard or lion do I use?

I have mac air 10.5.8. I need to upgrade even for new printer/scanner. Which leopard or lion do I buy?

You must start with Snow Leopard:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Thereafter, you can decide if you wish to upgrade further:
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Macbook Air Late 2010 model, 10.6.7, 2.13 4g ram. Trackpad is not working properly and in sometimes not at all.

Macbook Air Late 2010 model, 10.6.7, 2.13 4g ram. Trackpad is not working properly and in sometimes not at all. Need suggestions to resolve this issue? I have applied all Mac updates and still having problems with the trackpad.

The machine has a 1 year warranty, book an appointment with your local Apple Store or AASP to have it looked at.
You can try doing a SMC reset however I don't think that is the solution.
SMC RESET
• Shut down the computer.
• Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
• On the built-in keyboard, press the (left side) Shift-Control-• Option keys and the power button at the same time.
• Release all the keys and the power button at the same time.
• Press the power button to turn on the computer.
PRAM RESET
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
• Hold the keys down until the computer restarts and you hear the startup sound for the second time.
• Release the keys.

I have mac air mid 2011 but I can't make mirror of MAC screen on TV .What to do? Pls help

I have Mac air mid 2011 But I can't make mirror screen of my Mac to TV. What to do? Pls help

AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.

How can i share folders at Mac mini late 2009 with Apple Tv 3?

I'm using Mac mini 2009 and I can't share any folder with Apple tv 3...anyone managed to get a way to do so, so far?

I have a WLAN at home conneting Mac mini (late 2009), PS3 slim and xbox 360 in the living room and I would love to share whats on the Mac mini with AT3 in the guest room upstairs, physically it wont be possible to control both screens at the same times. The files I have are on external HD connected via firewire + USB to Mac mini and they are a mix of avi, mp4, mpeg etc. I'm talking about 3 TB of movies and series (its still legal here in Dubai to download ;-)). starting to convert such amount of files its not an option. AirParrot is a good option when I have media stored on my MacBook pro and would like to play it no AT3 but I used Beamer it works great for such function.
any ideas folks ?

Airport Extreme not working after downloading 10.8.3 on Mac Mini Late 2009

I downloaded latest upgrade OS X 10.8.3. This is onto a Mac Mini (late 2009). The Mini is hooked up to Cable Ethernet. I use the Mini's Airport Extreme to use as a Hub for other Apple devices to get onto the internet. I was enabling this through internet sharing through the sharing tab on system preferences. it has worked for years. I have restarted and tried several times. I do not know what to do . The names of the computers have not changed. I am a user not a whiz bang programmer type, it is very frustrating.

Hi, might try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Try setting up Internet Sharing in the new location.

How do I remove a disk from my mac mini (late 2009)?

I am trying to regain my mac mini (late 2009) which came with OS X Snow Leopard. WHY?   Because, after spending quite a few bucks, I have tried and failed to find a suitable substitute for APPLEWORKS. (I still have the disk)
I erased the Mac Mini's memory, so it is blank READY FOR me to install Snow Leopard. I still have 10.6.3 install disks.
HA HA.   That's a laugh.
1) After I put it in the MM,& started it up using my 10.6.3 install disk. The install app told me I couldn't install this system on this computer. WHY WHY?
2) Now I have a 10.6.3 disk stuck in the MM and I don't know how to get it out.
Anybody PLEASE PLEASE !!
(Normally I use a MM (mid 2011) but I want this other MM available to me.)

Dear Allan, Very interesting solutions to a stuck disk. I'm going to keep it for future.
I finally did get my disk out - because I started up using my Mtn.Lion BU (it's a Firewire) which I connected to my old MM late 2009. There she was & I ejected it.
And I did finally get my MM 2009 working again with Snow Leopard - with the great help from ds store.
So now I have my Appleworks back too.   YAH!

HT3986 Mac mini later 2009-- can i install windows 7 -64 bit on it?

hi there,
can i install dual system on mac mini later 2009?
windows 7 32bit or 64 bit?
thanks

Although I have the "Early" 2009 mini, I believe they're close enough.
I have a dual system installed. Mac OS X Mountain Lion and Windows 7 64 bit. I have 8GB of RAM.
You should be aware though that Apple does not officially support the 64 bit version of Windows 7 on this machine, although it seems to be working for the most part using Boot Camp 4.0 drivers.
My only complaint is about the nForce Ethernet Driver. There seems to be some problem with it. Whenever the nVidia Control Panel for video is launched, there is an error reported:
The ethernet itself appears to be working fine using some driver dated back to 2010. While I can go to nVidia's website and locate an updated driver for the GeForce 9400 GPU, I cannot seem to find one for the nForce Ethernet. Honestly, I am not even interested in the Network Control panel, but I get another error when I try to uninstall it.
Would be nice is this could be fixed. Windows 7 32 bit didn't have this issue but I want to run the 64 bit version so I can see all of my RAM.

I have mac air late 2009 model identifier 2,1 running os 10.6. i want to know can i upgrede it 10.8?

Similar Messages

Maybe you are looking for