I have macbook pro 13 late 2011.  efi 2.7 not see on software update and if download from site say in not compatible. why? in not compatible. why?

i have macbook pro 13 late 2011.  efi 2.7 not see on software update and if download from site say in not compatible. why?

Because your MBP does not require it.

Similar Messages

  • Macbook pro late 2011 is on Mac OS X v10.7 Lion and it is using lot of RAM

    Macbook pro late 2011 is on Mac OS X v10.7 Lion and it is using lot of RAM...when I turn on after 2minutes it freezes and do not repond and system prefrences also not working...plz help me....I don,t have mac os disc
    I have tried safe mode boot, NVRAM and PRAM reset but no luck...

    First, try a Safe Mode boot.
    Startup your Mac in Safe Mode
    A Safe Mode boot takes a longer than a normal boot so be patient.
    Once you are in Safe Mode, click Restart from your Apple () menu.
    If that didn't help, reintall OS X..
    Restart your Mac while holding down the Command + R keys so you can access the built-in utilities in OS X Recovery
    message edited by: cs

  • Please help have macbook pro late 2011 purchased second hand lion was already the OX I wanted to install mavericks my mac came up with a four digit pin number went to geek squad they wiped my hard drive now there is know OX on my mac those geeksquad guy s

    hello anyone i have a late 2011 macbook pro that i purchsed second hand it already had lion installed i wanted to install mavericks which I tried a four digit pin code came up thus locking my mac I took it to the geeksquad they wiped my harddrive and tried to renstall the OX they said they could not do it because a firmware passcode or filevault passcode was on it so I now have a brick can anyone help me fix this problem thanks for any info

    Pawn shop! They only looked after it for a stranger then the ticket ran out. Will apple accept that sell-on as a bill of sale? I'll give you 50:50 chance on that.  Did you see Apple recently refused to unlock an ipad left to a guy by his mother who died of cancer. Apple wanted a court order! (Til it got on the national TV news).
    Someone will have to produce the original owner's bill of sale I reckon.

  • Macbook pro (late 2011), Windows 8 (x64) High Defination Audio Code 10 error

    Hi guys,
    I have macbook pro late 2011. Currently installed Windows 8, updated and did setup of latest bootcamp but in any case Windows can not process with my sound card and shows error as CODE 10.
    I tried everything but couldnt solve. Please help.
    Many Thanks.

    I have the exact same problem... Everything else works great--just no audio. If anyone finds a solution, please share!!!
    Thanks!!!

  • Kernel_ rask process is slowing Macbook Pro Late 2011 down dramatically

    I have Macbook Pro Late 2011  8GB ram, 500 SSD. Once I upgrade to Yosemite I noticed that once I unplugged the power supply"wall adapted" kernel_task process would use up 100% of CPU. Can someone assist me?

    The battery needs to be replaced, or there is some other hardware issue.

  • MacBook Pro late 2011 Battery Performance drop dramatically

    MacBook Pro late 2011 Battery Performance drop dramatically
    9 months 94 cycles and its health is now at 89%

    Does the system still run off the battery only? Does it run for a few hours off the battery only? Then No it is not defective and no Apple will do nothing for you and No Applecare does not cover Consumable items which the battery is one of those.
    The only time Apple MAY, and that is BIG MAY, replace the battery is within the first year and only if Apple Deems the battery to be defective. Fat chance of that as long as the system runs off the battery for any length of time.

  • MacBook Pro Late 2011 Restore and EFI partition gone.

    Hello!
    Sorry if my problem seems easy to you but im stuck in a difficult situation. Im quite new to Mac, but after i tried to delete the BootCamp partition on my MacBook i deleted the Recovery HD and the EFI partition by accident. Now my question: is there ANY way to get a new copy of the Recovery HD so i dont have to use Internet Recovery each time? And is there a way to get the EFI partition back so i can update my EFI Firmware again? Mac OS X isn't damaged and is at the same place on the disk as before. 200 MB of free space before Macintosh HD and ~4 GB after it. I have a MacBook Pro Late 2011, 13", 4 GB RAM, a 500 GB Hard drive and i have the EFI Firmware version 2.3 on it so i can still restore using Lion Intenet Recovery.
    Thank you for your answers!

    1. Reset PRAM.  http://support.apple.com/kb/PH4405
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".

  • HT1237 Macbook pro late 2011 latest 1.69f3 but I have 1.69f4 installed....

    Hi,
    Model: Macbook pro 15 inch Late 2011 2.4 i7
    Software: OS X 10.9.4 (13E28)
    Last week I had the BSOD..... Tried everything what apple suggests, tried everything what google suggests.... Nothing.
    I decided to recover from last Time Machine.... Problem only appears when Macbook gets very hot and fans aren't cooling!
    Then decided to reinstall clean OS. Until now no problem.....
    From my investigation from Apple forums I understand that what controls the FAN's and hardware etc., for this to work correctly I must have latests EFi and SMC updates.
    Problem:
    In the lists of SMC updates: EFI and SMC firmware updates for Intel-based Macs states that My macbook pro Late 2011 (MacBookPro8,2) has to have: 1.69f3 (SMC 1.5) but what I have now installed is: 1.69f4 (SMC 1.7)
    So what? I have a incorrect version on my mac? Do I have to (seems to be) downgrade to: 1.69f3 (SMC 1.5) ??

    If you look at that listing, there are two MacBook Pro8,2 machines, the Early and Late 2011, and the SMC firmware specified is not the same...you have the SMC firmware that table lists for the Early 2011...it is likely the table has not been updated properly since the servers that download the SMC firmware look at the machine serial number and install the appropriate firmware for that machine.
    See:

  • How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.

    How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.
    Could it be a borked cable ? I just bought it new from the store today, i have updated both imac and macbook pro to latest thunderbolt firmware and updates. Both 10.7.3.
    MacBook Pro:
      Vendor Name:    Apple, Inc.
      Device Name:    MacBook Pro
      UID:    0x0001000A17016E60
      Firmware Version:    22,1
      Port:
      Status:    No devices connected
      Link Status:    7
      Port Micro Firmware Version:    FFFF.FF.FF

    You are correct, here is what Apple Says:
    http://support.apple.com/kb/TS3775
    I was able to find these instructions, however they referr to 2009-2011 27" iMacs. I think it's the same, if it's not then contact Apple directly for instructions. If either of the machines is less than 90 days old or covered by AppleCare then call AppleCare tomorrow for help, they should be able to easily answer this for you. You will find the number in your manual or you can use the AppleCare Contact Info link.
    Your iMac should automatically recognize the presence of a digital video signal at the Mini DisplayPort and enter Target Display Mode.
    If your iMac does not automatically enter Target Display Mode, press command + F2 to manually enter Target Display Mode.

  • I tried to install windows 7 in my macbook pro late 2011 but i tried to create partions after it installed and it turn to dynamic disks and ican't access mac or win 7 what should I do i cant format it because i dont have a backup

    I tried to install windows 7 in my macbook pro late 2011 but i tried to create partions after it installed and it turn to dynamic disks and i can't access mac or win 7 what should I do i cant format it because i dont have a backup

    It's not that you can't format it because you have no backup, it's because you'll lose everything when you do. Lesson learned. Always have a backup.

  • I have a MacBook Pro Late 2011 and I'm wondering if I install Windows 7 Ultimate to this MacBook Pro with this Full Retail Version. And if so, which bit to use either 32-bit or 64-bit since I have both disks.

    I have a MacBook Pro Late 2011 and I'm wondering if I install Windows 7 Ultimate to this MacBook Pro with this Full Retail Version. And if so, which bit to use either 32-bit or 64-bit since I have both disks.

    64 bit.
    32 bit won't use all your computer's ram.
    64 bit allows you to run 32 bit programs
    Your computer is 64 bit
    New programs use 64 bit.
    There is no reason to use the 32 bit version of Windows.

  • I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers?

    I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!

    Have you looked on Lexmark's support site?
    http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US

  • I have a MacBook Pro Late 2011 and having issues with utilities screen.

    I have a MacBook Pro Late 2011. I want to reformat my hdd to start from scratch. My issue is when I am on the utilities screen I am unable to click on anything. I want to delete my current partition but I am unable to click on Disk Utilities. Please help me!

    According to your profile your Mac is running v10.7.3 Lion.
    If that is the case, to reformat the hard drive you need to use Lion Recovery not Disk Utility.

  • Macbook pro late 2011. Have power on the battery but doesn't turn on at all.

    Macbook pro late 2011. Have power on the battery but doesn't turn on at all. Not even a sound, my mac has stayed turned off in nearly a month and now its not working???
    Any ideas to what the problem could be?
    Regards// Michael

    If a SMC reset does not bring life to your MBP, make an appointment at an Apple store genus bar for a free diagnosis.
    http://support.apple.com/kb/ht3964
    Ciao.

  • Can't find the Airplay icon! I have a Macbook Pro Late 2011

    I have a MacBook Pro Late 2011. Yes I am sure that it is Late 2011 because I looked up the serial number and the website says it is indeed MacBook Pro Late 2011. I just bought an Apple TV and I want to use Airplay but I CANNOT find the Airplay icon on the upper right menu bar. I updated my software and everything but I still dont see it! What do I need to do inorder for me to use Airplay? PLEASE HELP!!!!!!!!

    What Mac do you have? It needs to be at least 2011
    OSX needs to be at least 10.8
    Has nothing to do with Internet, you need to check your local network and also make sure both ATV and Mac are on the same network. Airplay should also be enabled on ATV

Maybe you are looking for