I have my ipod attached to an old, out of date email and when i try to update from my ipod it says "your itunes store password is incorrect" Any ideas why/how to fix?
i have my ipod attached to an old, out of date email and when i try to update from my ipod it says "your itunes store password is incorrect" Any ideas why/how to fix?
Try from a computer. You may have to reset your password. If you can't get the comfirmation email then you can use the secret question. Once you can log in then you change the the email address.
See:
Frequently Asked Questions About Apple ID
Here is how to contact iTunes:
Apple - Support - iTunes - Contact Us
Similar Messages
-
I have an iphone 3g I tried to down load an app for netflix and it said I need to have ISO 5 but my phone has ISO 4.2.1 and when I try to update it on my computer through itunes I get message saying I have current version how or what can I do do to get an app the lets me watch netflix on my iphone 3g .Is there an sulision to my problem? I also tried another app with another name diff from netflix and I got the same message saying i need ISO 5 .Someone please help thank you
Thank you for your help are you aware of any apps that will work the iso 4.2.1 system that will let you watch movies on the phone. Also I tried to down load something else the other day and got message that Safari wont let you open this is ther any to see if i have the latest safari on my phone?
-
My itouch doesn't download or sync. It won't even let me log in to iTunes on my computer. Any ideas on how to fix this???
I've used it on my same laptop before, even tried downloading iTunes again, but it just won't
complete all of the steps...almost like it freezes up.Try holding the Capslock key with the letter you want to be capitalized. It should work.
-
when i attempt to purchase something in app it says "contact iTunes store support to complete transaction" anyone knows how to contact store support?
Click here and request assistance.
(77309) -
My Iphone 5 won't show up in itunes on my computer? Any idea on how to fix this problem?
My Iphone 5 won't show up in itunes when i plug it into my windows 8 laptop but it shows up on my computer under devices and drivers as an iphone. Any idea on how to fix this problem so I can use my phone in itunes?
http://support.apple.com/kb/ts1538
-
Dear Apple Teams
when i try to update my Iphone5 To the new version 7 and my phone keep saying your phone softwear is up to date , but it still in the old version 6.
can some one help me about broblems ?.
Thank you.Did you change the ID in Settings>iTunes & App Stores>Apple ID? Tap the old ID and sign out and then sign in with the new one. If not running iOS 6 it will be Settings>Stores>Apple ID.
-
my ipod 6th gen wont sync new uploaded music and when try to update version 1.2 it comes up with error message 1436
Did you already have a look at this article? iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
-
Time Machine runs huge backups all the time. Any Idea Why & How to Fix It?
Right now System Preferences for TM says there is 881MB of available space on my Time Capsule with 998GB of storage. The TM system preferences has been stuck for hours saying it's backed up 31GB out of 68GB. No error messages. My wife and I only use the TC for TM backups.
Any idea why I'm not getting the much smaller incremental, hourly backups that I"m expecting? This is really slowing down my system.
Thanks,
Bob
Late 2008 MacBook, Mac OS 10.7.4bobair1 wrote:
Thanks for the info. Yes, I am running Windows XP with VMware Fusion. I keep my data files segregated from the "dark side". So if I opt out of backing up VMware, will my data files still be backed up?
Yes. See #D4 in Time Machine - Troubleshooting -
I have just today recieved a brand new iPod Touch 4th generation iPod with the latest update. Everything else on the ipod is working and my computer is able to read the camera fine, but iTunes cannot recognise it - even after restarting and trying different USB ports and cables. There is nothing at all coming up on the device list and iTunes is working as it would if I had no iPod plugged in. This is my first iPod on this computer and I have already tried redownloading iTunes. My computer is a windows XP computer. Does anyone have any idea on how to fix this problem?
Since this is an XP machine, which version of iTunes do you have installed? Is it the latest version?
Have you tried starting iTunes, attach the USB end of the cable, then while holding the home button on the iPod connect the 30-pin connector end of the cable to the iPod...that is the recovery mode but also should make iTunes see the iPod.
If that doesn't work you may need to take the iPod back and have it tested by the genius bar techs to make sure the connector is not bad. -
I recent recieved and Ipod touch model A1213 and i cannot figure out how to get apps on it. I have tried everything i can think of and when i try to update my ipod software it tells me that its already up to date. even though its only 1.1.5. How do i fix it?
You have a 1st generation iPod Touch.
It can be updated to 3.1.3 by purchase. See here Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -
I have an iPod 2nd gen that keeps having an error code 9 when trying to restore. Any ideas on how to fix?
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
when trying to enter my wifi password the ipod won't let me enter upper case letters. do you have any ideas on how to fix this ?
Try holding the Capslock key with the letter you want to be capitalized. It should work.
-
Help
The back ground lights have gone on my lovely Ipod..
Any ideas on how to fix it?
IanHi Elsledge,
Thanks for visiting Apple Support Communities.
I recommend the troubleshooting steps in this article if your iPod screen is dark:
iPod troubleshooting basics and service FAQ
http://support.apple.com/kb/TS1382
Best Regards,
Jeremy -
Hi
My Ipod nana...has frozen up and working. It shows a white screen with the wrong time and a lock symbol. When I connected it to my computer, it didn't show up. Back of Ipod gets really warm..Any ideas on how to fix it? Than YouIf it happens again and the reset (home + power buttons) doesn't work, just let the battery drain; you'll know when the screen shuts off. Charge it back up and it should be fine. Frankly, I'm surprised this worked for you. Usually I hear people with this problem say that holding both buttons doesn't work, and they have to do the battery drain.
If the issue is incurable next time, you have a one-year warranty from the date of purchase. -
i'm getting a 9041 error when trying to convert files to AAC -- any ideas on how to fix it? the files files in iTunes show up as Apple Lossless but i can't put them on my iPod
"I have been able to convert to AAC by first converting to AIFF and then to AAC. This is a pan though."
this worked for me.
thanks.
Maybe you are looking for
-
Why is my updates tab showing an update for a game that i have never bought?
also, why does it show a random apple id that surely isn't mine? added a screenshot, maybe that can help.
-
ISU Contract Parner with no SD Customer in ECC
Hi All We have a scenario where ISU Contract Partner was created without a corresponding SD reference customer when the data was migrate from legacy. EMIGALL created entries only in BUT000 table, but none in KNA1 and corresponding SD customer tables.
-
Hi, what's the use of component? Thanks
-
FINISHED_WITH_ERROR IN REPORTS
Hi guys, my question is regarding the error message "FINISHED_WITH_ERROR", in reports. I run the below code to print a report from form. v_report_job_id = run_report_object(v_report_id,p_list); -- getting the status of the report v_rep_status = repor
-
Creating a Netinstall from multiple CDs
Hi, Is it possible to create a Netinstall image from multiple CDs ? I want to create Netinstall images that are made up of the 2-CD sets that come with new machines. If it is possible, how do I do it ? Thanks.