I have my itunes media stored on my external hard drive. On this external drive I have a folder called "TV shows". How do I incorporate this folder back into the itunes library?
I have my itunes media stored on my external hard drive. On this external drive I have a folder called "TV shows". I previously cut and pasted itunes TV shows to this folder to free up some space. How do I incorporate this folder (TV shows) back into the itunes library?
assuming the copy files ... when adding option is checkmarked in preferences > advanced, drag the folder into an open iTunes window while holding option (⌥).
Similar Messages
-
How do I get all my songs from my ipod back into the itunes library if itunes was uninstalled and reinstalled?
Do you have iCloud? Or do you have a backup of iTunes profile? More info please
-
I have used itunes forever, Sunday night when I tried to get into the itunes store an error popped up and said could not open; error code (-3212), How do I get back into the itunes store?
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I have a new iPod touch. It shows a picture of a USB plug going into the iTunes logo. Can't get it to do anything. What do I do?
You really need to repair your computer.
Please read Chapter 2.
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
IMovie '11: how to move edited clips back into the event library?
I made a green screen video that is supposed to be the foreground, and edited out the ums and ahs. Now I need to add a green screen background, which apparently I cannot do after already inserting the green screen foreground footage. (I would LOVE to be able to do that, but apparently you cannot.) I have tried to drag the edited videos back into the event library, but they bounce back out, and I have checked all of the menus twice and there is no command to export to event library. Help! I need to insert a background and don't have another hour to re-edit from scratch.
Hi
No - there are no easy and straight forward way to do this - BUT
You must do as one does in iMoivie when there is a need to combine several functions.
Export out (the manipulated clip) as a full quality QuickTime movie (just this part)
Then import this as a new Event
Put this into a new project (if several effects is to be applied) or into Main movie if You only need to apply one more thing as a GreenScreen.
For several effects - one might need to Export/Import several times. Much easier in FinalCut Pro.
Yours Bengt W -
How can I get my Nook purchases into the NOOKBOOK Library area on my IPAD mini?
How can I get my Nook purchases into the NOOKBOOK Library area on my IPAD mini?
Not possible. iBook will not read or even be aware of the
Nook books.
Also answered in your other post
https://discussions.apple.com/thread/2738595?tstart=210 -
I now have around 3,000 songs on my ipod Classic and still adding. I didn't want to save them in itunes library so I deleted them from there once I had them on the ipod. I have since found out that the ipod music cannot be transferred back to the itunes library nor can I extract them from the ipod directly. Do apple provide such facilities or softwareto do this and, if not, is there any recommended and safe software to perform it? I see from Google that there are plenty of programs available but I want to be sure that what I use is safe, reliable and not breaking any of Apple's terms and conditions. Any advice would be welcome.
Hello Chris Jones,
I just found this and I'm trying to figure it out so your post is an excellent starting point, thank you! Since you posted this in Feb are there any things you would change or you found out after doing it? And how is everything running?
As a data point, I just added a SSD as the startup drive to an older mac pro (1,1) which is only used for Logic Pro and the speed now is amazing. Now I want to see if I can off-load the same things you have dealt with. Any additional insight will be greatly appreciated and thanks again for taking to time to document it.
ld foster -
Hi, I lost my entire music library when my hard drive crashed 2 wks ago. It's all on my iPod, though..but the songlist appears gray. I just cannot figure out how to download my iPod music list BACK into my iTunes library. All they seems to address is Library -> iPod transfers. I'm not an iT geek.. Help meeee!
See Recover your iTunes library from your iPod or iOS device.
tt2 -
Suddenly I am unable to transfer songs from iTunes to Garage Band. When I try to bring the songs over to Garage Band they will not drop into the track. They immediately go back into iTunes. I have made many mixes using GB and cannot figure out what has happened. Ive looked through system prefences, help window, etc. and cannot understand what has happened. Any advice?
robinfromshort hills wrote:
When I try to bring the songs over to Garage Band they will not drop into the track. They immediately go back into iTunes.
either use the Media Browser in GB, or drop the actual song file into the timeline (cmnd-shift-r will reveal the file from iTunes): -
I had to change computers. Now when I plug in my iPod I get the message. My iPod is synched with another itunes library. How do I find and synch with my original.
You need to Copy the iTunes from the Other computer or its Backup, to your New computer.
Also, See here for...
Download Past Purchases
http://support.apple.com/kb/HT2519 -
How can I add manually-downloaded podcasts into the iTunes Podcase lists?
I see no way to "import" an existing podcast MP3 file into the Podcast screen so it shows up in an existing Podcast list. I need this because I have older podcast episodes which the downloaded subscriptions do not include anymore, but these old episodes really belong in the same podcast list as the newer ones.
This is a glarimg omission that makes the podcast screen inflexible and hard to use - plz help!
Thanks,
/Mark
Lenovo ThinkPad T60 Windows XP Pro it's a wide screenI tried doing that but it didn't work.
Anybody know the magic to make this work? -
Why is my iPod showing a no sign when i drag music into the itunes library and how do i fix it
when i go into itunes and in my desktops music library, i open itunes and click on on this ipod. when i want to drag my music it wont let me and show a red no sign. my sister has the same ipod but doesnt have this issue. please help me fix it, this has been going on for a little under a year now.
Do you have iTunes set up to sync manually? That is required to drag and drop
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
Do you have any Restrictions set that would prevent syncing those songs? Settings>General>Restrictions -
It's done it with a load of cds, so then I can't even get the album artwork to work. Please help! It's starting to bug me haha
In iTunes select all songs you want in the same album, right click the selection, choose "get info", type the album name in the album field, click OK.
-
I use Command (⌘)-Shift-4 to grab screenshots of diagrams to make flashcards with on a daily basis. But now my screenshots have stopped going to my clipboard - and they don't paste into my flashcards.
Dropbox popped up and asked me if I wanted to use it to save my screenshots and I said No Thanks, but then right after that my screenshot function stopped working. I can still save shots to my desktop, but I'd love to not clutter my desktop. The screenshots are not going to dropbox either, I checked.
Can someone tell me how to get my screenshots to go back to going into my clipboard?
Thanks!Thanks Lanny! I actually typed in the wrong command into my question - I meant to type what you mentioned. But I did end up figuring it out: for some reason the shortcut to screenshot into my clipboard changed. I was able to restore all my shortcut commands back to default and it worked again!
Thanks! -
iMovie has lost contact with my font libraries. It only shows 1 font and I do not know how to re-connect it with the font libraries
Hello there ATCLTD,
I was think these troubleshooting steps will be the best for the issue you describe.
First I would perform a safeboot with this article named Mac OS X: What is Safe Boot, Safe Mode? found here http://support.apple.com/kb/ht1564.
To perform a Safe Boot, press and hold the Shift key immediately after your Mac starts up. Continue holding down the Shift key until a gray Apple logo appears on the screen.
And perhaps this article to troubleshoot duplicate fonts, which can cause all kinds of wonky activity.
Font Book 198: Resolve duplicate fonts
http://support.apple.com/kb/PH5960
Take care,
Sterling
Maybe you are looking for
-
How to add two lines in one cell in smartforms
Hi All, can anyone help me to implement the following format in smartforms? i have create one line type in table, one of the cell in the line type need to split two small line, the upper line is summary and the lower line still split into three small
-
Creating an SWF in Illustrator CS2 with a web link
I am trying to create a simple flash animation using CS2 (I don't have Flash). I made the animation ok, but apparantly I need to have the click through embedded in the animation in order for it to work properly on out company web site. If you would l
-
Error in executing wilcard query, strange!!!
Select c1.docid from S3TSTPUBG.cmdoccontents c1,S3TSTPUBG.cmdocuments c2 where (contains(CONTENTDATA, ' ( (%mad% WITHIN searchkeywords ) WITHIN en ) ', 1 ) > 0 ) gives 0 results ....(valid query) whereas Select c1.docid from S3TSTPUBG.cmdoccontents c
-
Continuous line in 2D chart?
Is there a way to have a 2D line chart link any disparate data points so the line is continuous?
-
Can anybody tel me the concept of cost display(internal, external and material) on PM Order. I know the settings but want to know the concept because it involves costing elements/ GL accounts? Regards, VM Edited by: V M on Jul 6, 2008 2:49 PM