I have no sound when watching videos or live streams which works fine with IE or Linux on the same system

I have no sound when watching videos on you tube or live streaming. If I switch to Linux everything is fine in firefox on this system but nothing with firefox in windows. If I use internet explorer everything is fine again, which seems to me to say that the problem lies within firefox 36. Can anyone help with this problem?

Tried that with the same result. I can't understand why it works with Linux (Ubuntu) and not Windows. IE works as well but I prefer to use Firefox, so I guess I'll just have to switch browsers when playing videos - weird.

Similar Messages

  • I have no sound when playing video in apps like ESPN on my iPad 4

    After backing up my iPad to my computer I have no sound when playing videos within apps like ESPN, etc. never had this happen before. I have the most recent version, iOS 7.1.1.  Can anyone help me fix this problem?

    In the Control Center I discovered the Mute button was on. I didn't even realize there was a mute button there! So I turned it off and now I have sound. Tah dah!

  • Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?

    Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?
    Picture below, many thanks for your help.
    Jason

    Back up all data before proceeding.
    Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
    Start up in safe mode to rebuild the font caches. Restart as usual and test.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.
    If you still have problems, then from the Font Book menu bar, select
              File ▹ Restore Standard Fonts...
    You'll be prompted to confirm, and then to enter your administrator login password.
    Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

  • I have an existing new belkin modem router which works fine with quite a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then ju

    I have an existing new belkin modem router which works fine with quiet a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then just like my macbook pro and (imac future purchase) to wirelessly back up to it???????????

    Your will need to perform a Factory Default Reset on the TIme Capsule to clear out the current network settings and then reconfigure it to "join" your wireless network using the AirPort Utility setup application.
    To perform the Factory Default Reset on the Time Capsule....
    Pull the power cord from the back of the device
    Wait a few moments
    Hold in the reset button on the back of the Time Capsule and keep holding it an additional 8-10 seconds while you simultaneously plug the power cord back in to the Time Capsule
    Release the reset button after the hold period and allow 25-30 seconds for the Time Capsule to restart to a slow, blinking amber light
    On your Mac.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Continue
    Follow the guided setup and choose the "join" option when it appears duriing the setup
    You will need to know the exact type of wireless security that the Belkin router is using to enter this information during the setup of the Belkin. Otherwise, the Time Capsule cannot join the network, and you will receive an error message after the configuration process.

  • Is there a way to print from ipad 4 to a non AirPrint printer? I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer. Is there an app for this or adaptors which could work?   thank, Ric

    Is there a way to print from ipad 4 to a non AirPrint printer?
    I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer.
    Is there an app for this or adaptors which could work? 
    Thank, Ric

    Printopia is another option but be aware that since these solutions effectively act as a print server and AirPrint receiver, they require a computer to be running on the same WiFi network.
    Canon also has a couple of apps in the App Store that might facilitate this on non-AirPrint printers. Check out...
    Canon Easy-PhotoPrint
    Canon Mobile Printing
    PIXMA Printing Solutions

  • TS1702 i downloaded the GV app to my iphone but i'm trying to set up the app and it says it can't connect to google when i try to sign in to my google account.... any ideas what's wrong? i can access my gmail account just fine with my gmail app on the sam

    i downloaded the GV app to my iphone but i'm trying to set up the app and it says it can't connect to google when i try to sign in to my google account.... any ideas what's wrong? i can access my gmail account just fine with my gmail app on the same phone

    What's a GV app?

  • When I try to play youtube video I get the message of blocked plug-in, and I can not play video using Safari. (Youtube works fine with google chrome) I tried installing flash player HTML5 etc... but still no difference.

    I just installed OSX Mountian Lion, and ever since then I can not play youtube video's. I get the message of 'Blocked Plug-in' in the youtube screen. I have tried installing Adobe Flash Player. HTML 5, also tried enabling/disabling java, but nothing worked out. Is there any way I can play youtbe vieos on Safar. (It works fine with Google Chrmoe, only safari has problem)

    If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. Safari > Preferences > Extensions
    It can also be installed as a plugin in /Library/Internet-Plug-Ins.
    Try uninstalling the currently installled Flash plugin (required for most YouTube content) then reinstall new >  Troubleshoot Flash Player | Mac OS
    From your Safari menu bar top of your screen click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now from the menu bar click Develop > Empty Caches

  • No sound when watching videos, you tube, etc.  mute button seems to be off, volume up high.  ideas? solutions? thanks

    My macbook pro doesn't make any sound when I'm watching you tube or some other videos.  The mute button seems off, volume up at the maximum level.  Any ideas or suggestions? Thanks

    lf you have only one mini conector, look in and see if there a red light on, if so take toothpick and insert it in the hole and GENTLY wiggle it around, there is a normalling switch tnat converts the signal from analog to digital

  • I have a replacement Note 3.  My Vodafone SIM, which worked fine in the original, fails in the replacement.  When I try to access Settings, the menu briefly flashes, then the phone reverts to the home page.  Will a Factory Data Reset fix this?

    Hi,
    I have a Note 3 and a Vodafone SIM that are not playing well together. 
    The history is:
    I got my Note 3 over 2 years ago.  We visited Italy 2 years ago and I bought a Vodafone sim at a Vodafone outlet.  Everything worked perfectly during that trip and a subsequent trip to France.
    Last October, I had to replace the Note 3 because the camera was failing.  I had insurance, so the insurance company sent me a refurbished Note 3. When I tried to use the SIM last December, the Note 3 had problems. When I put the SIM in and started the Note 3, the phone recognized the sim (but gave me an error that, according to Verizon, is spurious).  I could make phone calls but I could not access the data network.  In order to access the data network, you have to go into Settings. More Settings, Mobile Networks and set the Access Point Name.
    With the replacement Note 3, I cannot access Settings.  As soon as I try to access Settings (with the Vodafone SIM installed), the Settings menu appears and then immediately the home screen comes up.  After working with Verizon for over an hour, I was able to get into Settings and set the access point name by booting into Safe mode.  But as soon as I rebooted into 'normal' mode, Settings failed and I could not access its menu (to turn on wifi, for example).  There are a couple of other apps that did the same thing - but I cannot remember which ones.
    I have talked to Vodafone - they have no clue.  I talked to a Samsung rep I ran into at Best Buy, he thought the Vodafone SIM might be corrupted.  And now a Verizon tech I talked to last week thinks it is a firmware problem on the phone and I should do a Factory Data Reset.
    Have you ever heard of this problem?  What do you think might be causing it?
    Thanks for your help.

    On2CO,  I'm glad you have reached out to us today. Thank you so much for the very detail description on what is going on with the device. Sounds like there might be an issue with an application that might be causing these issues. The reason I say that is, when the phone is in Safe Mode you are able to access the Settings screens with no issues. While in Safe Mode that does block all 3rd party applications from running on the phone. I would suggest on trying to back up the device and perform a factory reset: http://spr.ly/6-182Vuo (you would want to make sure to uncheck Automatic Restore in step 3). Once the reset is complete try to see if you can get into Settings. Then, I would recommend on adding 3rd party applications back on to the device one by one to see if we can find what app might be causing this issue. Please keep us posted if you have any further questions or concerns.   KevinR_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I have already deleted many photos, videos and apps and yet my available storage in icloud remains exactly the same.  What do i do now to reduce the storage so i can once again "back up"

    I have reduced my photos, videos and apps quite a bit and yet my available storage in "icloud" remains the same!  It won't let me back up now unless i delete storage( which ive done) or buy more storage, which i won't!  So now what?

    when you go to settings > icloud > storage and backup > and select your device it will tell you what all is going into your backup the next time you perform one. that will give you more information than we can.
    the only other thing i can think of is that you have a large amount of 'other' data taking up space on your phone. that consists of settings, the iOS itself, contacts, calendar events, messages, and other things like that. contacts and calendars in icloud don't take up space in your icloud backup because they're being synced in real time, but if they're locally stored or connected to an email address on your phone, they will.

  • My iPad will not load my photos from my pictures using ios5 iTunes. Works fine with my iPod. Does the fact I have photos taken on my iPad have any impact?

    My iPad does not load my pictures folders from iTunes. It works fine to my iPod. I am using ios5 and a pc, does the fact I have photos taken on my iPad got anything to do with it?

    Having photos that you took with the iPsd has nothing to do with this at all.
    When you sync photos to the iPad, you can select one main photo folder only - as described above - using the sync photos from heading within the photos tab of iTunes. You can have one level of sub folders within that main folder as well that you can sync to the iPad.
    All of the photos must remain selected to sync each time or the unselected photos will be erased from the device.
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Photos Tab on the right.
    Click on the "Sync Photos From" heading and navigate to the pictures folder on your computer that you want to sync.
    Click on all of the sub folders within that main photos folder that you want to sync. You can select as many sub folders within that main folder that you want to put on the iPad as long as you use one level of folders only in the main photos folder.
    Click on Apply in the lower right corner of iTunes

  • I installed 3 Apps which worked fine.  After connecting to itunes the Apps won't open when tapped.

    Apps worked OK yesterday but after connecting to itunes the new apps will not open.

    If you go to iTunes on the top you go to store and click Authorize This Computer. Then it should work fine. You may have to re download but that should fix it hope it helped

  • I have no sound in Netflix, everything else seems to be working fine

    Sound from all other functions working. Any ideas?

    And, on a couple of occasions, I could not get it to play without unplugging and replugging the power.
    This also happens sometimes with the 2nd-gen model. I just keep clicking the menu button on the remote every few seconds until I finally get a picture. I've never had to cycle power to resolve it. But sometimes it does take a while. Sometimes the power light even goes out (clicking the menu button turns it back on).
    Definitely not elegant. Needs work. But it's "normal", not a problem with your unit.

  • I have an iPad mini and a 2nd gen Apple tv -which works fine with Airplay--and whilst i can get BBC Iplayer and 4OD , it only works with audio for ITV player and Demand 5. What am I doing wrong

    I have a new iPad mini and can successfully use airplay with my 2nd generation Apple tv . BBC Iplayer is fine --as is 4OD, but ITV player only works in audio format--and Demand 5 does not work at all. I am pretty sure both the latter are compatible--so what can i do to fix this and  what am i currently doing wrong?

    Someone recently noted a problem staying logged on the Huffington Post since it became connected with AOL. The workaround for that is to change your connection setting here:
    orange Firefox button (or Tools menu) > Options > Advanced > Network
    Click the "Settings" button and choose either "No Proxy" or "Use System Settings" option, and OK the change.
    Not sure whether Washington Post could be affected by that same setting.
    In reviewing your extensions, I'm puzzled that you have both DoNotTrackMe and SavvyConnect. The first one seems to aggressively block certain communications with websites (potentially affecting functionality) while the second one seems to report on your browsing habits (they better pay well is all I can say). Have you tried disabling both of those to see whether that has any effect?
    orange Firefox button (or Tools menu) > Add-ons > Extensions category

  • I have an airport extreme space station which works fine, but does not ask for the password so anyone can get on my network. I don't know what to do to fix this.

    I set up airport wifi with a WEP password, but it never asks for the password and anyone can enter my network...what to do?

    Is it possible to backtrack your way out of the keychain?
    Yes:
    Run the Keychain Access utility found in \Applications\Utilities
    In the category column (on the left side of the utilities' window), select "All Items."
    In the right column look for your Network Name. It will have a "Kind" of "AirPort network password."
    Delete every entry that has both your Network Name with this Kind.
    What can I do to test or reset?
    You can completely erase all the base station's passwords by performing either a "hard" or "factory default" reset. You can also temporarily disable these passwords for up to five minutes so that you will have enough time to change them using the AirPort Utility, by just performing a "soft" reset. I would recommend this one first.
    This would also be a good time to consider using WPA or WPA2, instead of WEP, as WEP is no longer considered secure.
    I got the airport extreme based used with no softward and set up with reset on airport base and followed instructions.
    You can download a copy of the AirPort Utility, that runs on OS X Tiger here.

Maybe you are looking for