I have one playlist on iphone4. how can i add new playlist without deleting old one. i do not have old playlist in itunes any more.

I have one playlist on iphone4. how can i add new playlist without deleting old one. i do not have old playlist in itunes any more.When i try to sync iphone with itunes it says that this action will remove my old playlist and all songs.

"it says that this action will remove my old playlist and all songs."
Are you connecting to a different iTunes library than you normally connect to?  That will erase the songs and playlists since the iPhone can't be connected to multiple libraries even if it is in manual sync mode.
If you no longer have access to the original library that your iPhone calls 'home', then the only way to save the playlist (and the songs on your iPhone) would be to use a 3rd party application to extract your iPhone contents to this new iTunes library you're trying to connect to.

Similar Messages

  • How can I add new games without overwriting the old ones?

    I have just purchased two new games in the itunes store and although they are showing in the library (under applications) my previously purchased games are not. In Summary under games it will not let me choose selected games only 'all games' and when I press sync warns that the existing games will be replaced. How can I add these games without deleting the older ones? Also if I did want to remove a game from my ipod how do I do it?

    hardlyquinn wrote:
    Part of the problem is that I can never sync the whole thing as I dont keep all my music in my library (it seems silly to have my enture cd collection on the computer).
    Clearly it ISN'T silly as it avoid issues like you are having right now. If you need more space, get an external hard drive. To me it is much sillier to only have your stuff on the iPod and no where else as the iPod, as a small portable player, is much more likely to be dropped, lost, damaged, stolen, forgotten somewhere, etc.
    While I am not familiar with the use of games on the iPod (I have never bought any) you can switch the iPod to manually manage and then you can add content to your iPod without losing what is already there. Perhaps it works for games as well.
    But long term, I strongly suggest you keep all your stuff in your library so if you need to (you have to perform a restore on the iPod, you lose it and buy a new one, etc.) you can very easily sync it all back to the iPod when needed.
    Good luck,
    Patrick

  • HT1977 i want to add a app i just purchased to my i phone. nut when i click apply it asks me if i want to remove the rest of my apps.. which i dont.. how can i add the app without deleting my other apps

    i want to add a app i just purchased to my i phone. nut when i click apply it asks me if i want to remove the rest of my apps.. which i dont.. how can i add the app without deleting my other apps

    You can sync an iPhone to only one computer. If you connect it to a different computer (or you have never connected it to a computer) it will delete all iTunes content on the phone and replace it with the iTunes content on the current computer. As Avis says, you can transfer your purchases to the computer you are about to sync to, but only if that computer is authorized to the same account that the content was downloaded under.

  • Bought an ipad3 and I have no credit card..how can I make an application without credit card?

    I bought an ipad3 here in the Phil's and don't have credit card...how can I create an account without using credit card?

    How to Get Apps From the App Store Without a Credit Card
    http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
     Cheers, Tom

  • How can I add new songs to the top (not the bottom) of my playlist in iTunes?

    How can I add new songs to the top of my playlist in iTunes?
    I thought thats what it did before but now it automatically adds new songs to the bottom of the list.
    Not a huge issue but an annoyance.

    Go to your Music library
    Then, Click Playlist
    Then, Click the sort arrow until it points down.

  • I have problem with my contacts.  I can't send message if the contact didn't send me a message before.  How can I add new address?

    i have problem with my contacts.  I can't send message if the contact didn't send me a message before.  How can I add new address?

    Hi tizac,
    You will want to add them to your Contacts. 
    There's a "+" button at the bottom of the contact list on the left to add a contact.
    If you need to add the email address or phone number to an existing contact, there's an Edit button at the bottom of the contact info (on the right).
    Once you have the contact email address or phone number you want to message to, scroll all the way down to the bottom of their information and there are options to:
    Send Message               FaceTime
    Share Contact             Add to Favorites
    Of course choose "Send Message" to send an iMessage to them and you will start a new chat.  You will be given the options of how to contact them, via phone number (if they are on an iPhone) or email (if they are on an iPod touch or iPad).   They do need to be signed up for iMessage or it won't allow you to send.
    ivan

  • How can I burn my iMovie project to DVD?  I do not have iDVD or iLife on my iMac but I do have the internal DVD slot.

    How can I burn my iMovie project to DVD?  I do not have iDVD or iLife on my iMac but I do have the internal DVD slot.

    Hi
    If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
    Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
    • iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
    • DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
    • Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
    • Burn - only free alternative I know of on internet. Very simple - Just for doing a plain Video-DVD
    Burn http://www.digital-digest.com/software/Burn.html
    only You can buy from Apple is
    • FinalCut Pro-X which also can burn to DVD but without any nice themes.
    AppleMan1958
    You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
    Yours Bengt W

  • I have lost all of my keynote templates now that I have upgraded to yosemite.  How can I use Keynotes and pages etc on my computer and not on the cloud.

    I have lost all of my previously created keynote templates now that I have upgraded to yosemite. How can I use Keynotes and pages etc on my computer and not on the cloud.

    Welcome to Apple Support Communities
    All iWork apps allow you to save your documents on your computer. You will be able to choose the destination when you want to save a document.
    You can also disable iCloud for some apps. To do that, go to System Preferences -> iCloud, press "Options" next to "iCloud Drive" and disable the apps you want to.
    If you have lost your old documents, you should have a backup that you made before upgrading to OS X Yosemite, so you only have to restore it.

  • How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

    How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
    After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

    There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
    Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
    I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

  • How can I add new background on iweb?

    Dear all,
    somebody knows how can I add new backgroungs on iweb? and also how can I add my own themes?
    Cheers

    bobzhuman wrote:
    You can add new backgrounds in the "page"..."layout" section of the "inspector"...no limit to what you can add. Remember to use low resolution pics (72 dpi vs 300 dpi) and think of the size necessary for a "wallpaper" on your desktop. ex. http://www.desertmoon.net/Coryhamilton/Home.html done with a Jumsoft theme (baseball dark) as a core.
    The file used as a background on that site is located at http://www.desertmoon.net/Coryhamilton/Home_files/grunge.jpg
    It's dimensions are 1200px by 797px and 284k in file size. I guess there might be a reason to have the width set for 1200px even though file sizes could benefit from a smaller dimension repeating graphic, but running the file through Photoshop or even Elements would let the owner "Save For Web" as a .jpg - medium quality and get the file size down to about 108k so that the page would load quite a bit faster.

  • How can I add new row/column into existing jTable?

    Hi add!
    Can you help me how can I add new row/column into existing jTable?
    Tnx in adv!

    e.g
    Create two buttons inside the Table ( "Add New Row" ) and ("Add new Column")
    their handlers are:
    add new row:
    //i supose u already have
    DefaultTabelModel tablemodel = new DefaultTableModel(rowdata, columnNames);
    //and   
       JTabel jtable = new JTable(tablemodel);
    // Handler (row)
    jbtAddRow.addActionListener(new ActionListener(){
       public void actionPerformed(ActionEvent e) {
          if(jtable.getSelectedRow() >= 0 )
              tablemodel.insertRow(jtable.getSelectedRow(), new java.util.Vector());  
           else  
                tablemodel.addRow(new java.util.Vector());
        });to add new columns its the same but inside actionPerformed method:
    ask for e.g "Whats the name for the new column"
    then,
       tablemodel.addColumn(nameOfColumn, new java.util.Vector());   Joao
    Message was edited by:
    Java__Estudante

  • How can I Add new LookAndFel to IDE

    How can I Add new LookAndFel to IDE "JDeveloper 10g" ?
    (to the combo box in the Tool->Preferences->LookAndFeel ).

    Here is how you can add new L&Fs to the drop down list. (Instructions are for Linux , as I use Linux, but they will work for Windows too)
    Add the L&F jar to <path to JRE>/lib/ext (or <path to JDK>/jre/lib/ext). Then create swing.properties (if it does not already exist) in <path to JRE>/lib (or in jdk...) with following lines:
    swing.installedlafs = motif,windows,metal,mac,plastic
    swing.installedlaf.motif.name = CDE/Motif
    swing.installedlaf.motif.class = com.sun.java.swing.plaf.motif.MotifLookAndFeel
    swing.installedlaf.windows.name = Windows
    swing.installedlaf.windows.class = com.sun.java.swing.plaf.windows.WindowsLookAndFeel
    swing.installedlaf.metal.name = Metal
    swing.installedlaf.metal.class = javax.swing.plaf.metal.MetalLookAndFeel
    swing.installedlaf.mac.name = Mac
    swing.installedlaf.mac.class = com.sun.java.swing.plaf.mac.MacLookAndFeel
    swing.installedlaf.plastic.name = Plastic
    swing.installedlaf.plastic.class = com.jgoodies.plaf.plastic.PlasticLookAndFeel
    swing.defaultlaf=com.jgoodies.plaf.plastic.PlasticLookAndFeel
    Note that I retained default example L&Fs that normally come with the JDK/JRE (depending on the platfom) and added PlasticLookAndFeel as additional PLAF (Pluggable Look And Feel).
    Now it should be possible to choose Plastic L&F in not only JDeveloper but also other Swing apps that you want to use.
    Please let me know if this works and also if you have any questions.
    - Ganesh

  • How can i add new identity in file option of menu bar

    ''locking as a duplicate - https://support.mozilla.com/en-US/questions/869755''
    how can i add new identity option in file option of menu bar

    There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
    Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
    I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

  • How can I remove the photos without deleting them from the album?

    I am making a book in Aperture 3.  I want to change some of the pages that I have put together, and want to remove some of the photos from some of the pages, to put them on another page.  How can I remove the photos without deleting them from the album?

    As a follow-up, I have found that clicking on the photo in the book also highlights the photo on the strip below.  So, if you then hit delete, you will delete the photo from both the book page and the album (which is the book, the way I have it set up).  If you only want to delete it from the book page, you then have to un-click the photo on the strip below, or both will be deleted.  This seems unwieldy.  I deleted 6 photos from a page and found all of them gone from the album.  The only way that I can see to keep them in the album is to then unselect them from the bottom strip after selecting them fro the page.  This seems to call for an extra step. 
    Nancy

  • How can I add/change art work to albums where the art work isn't available at iTunes?

    How can I add/change art work to albums where the art work isn't available at iTunes?

    Go to google and search for the artwork.  When you find it, save it to your computer.  Right click the album and select get info.  Drag the image you saved to the empty box for album art.

Maybe you are looking for

  • Importing EJBs into web dynpros

    I have created EJBS and I would like to use these EJBs in web dynpros. How do I do it. I think I can create a jar file for the EJBS and reference them in my Web Dynpro project but I think that is not the right way to do it. Thanks, PKK.

  • Finding an object's "path"

    Hello, I'm trying to write a plug-in for Flash CS5 that will display the "instances path" for a selected object. I'm trying to work with JSFL. I manged to get all selected objects using fl.getDocumentDOM().selection. I iterate over the array I get an

  • Variant files in Miscellaneous folder

    Hi, This is regarding 4.7 version. I am trying to configure Best Practices - India (Baseline package) manually. Unfortunately the DVD on which the Best Practices documentation was sent is damaged and hence I am not able read some 'variant files' requ

  • Changed column order not applied to interactive report

    Hi, I've changed column order for interactive report. But it is not applied. How can I solve this issue? Thanks, Guy

  • Mac and Word say 2GB Flashdrive is full, when its not

    All of a sudden, my 2GB Flashdrive is saying its full and Word will not let me save to it and I can't drag files into it. I know I've never put that much on it, nor have I deleted anything off of it. Any suggestions?