I have One Sender system and two receivers system scenario. Pls help

Hello,
I have One Sender system and two receivers system scenario.
My sender is RFC (sync) in nature.
My one receiver is RFC (sync) in nature.
My second receiver is RFC (sync) in nature.
How to proceed with this.
If my second receiver is async then how to proceed with this.
Regards

Hi Rick !
Depending on your requierements, you can create a BPM that
1) receives request from sender
2) sends request to receiver 1 / receives response from receiver 1
3) sends request to receiver 2 / receives response from receiver 2
4) do some processing with both responses
5) sends response to sender.
If your second receiver is async, just use an async send step in step 3. As far as I know, you cannot use multimapping with sync scenarios.
Regards,
Matias.
ps: please award points if helpful

Similar Messages

  • One Sender system and two receivers system scenario. Pls help

    Hello,
    I have One Sender system and two receivers system scenario.
    My sender is RFC (sync) in nature.
    My one receiver is RFC (sync) in nature.
    My second receiver is RFC (sync) in nature.
    Pls tell me and send me links/docs for this scenario.
    Regards

    Hi Rick,
    For two receivers you require 2 interface determination, receivers determinations etc.
    Go through these threads for one sender and multiple receivers:
    one sender and two receiver
    /people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
    Then configure your RFC communication channel in XI system + activate it and after that using all same parameters make an TCP/IP RFC destinatioon on R3 side.
    Rewrads if found helpful.
    BR,
    Alok

  • One Sender system and two receivers system(Sync) . Pls help

    Hello All,
    Help required to make one scenario in XI.
    Currently there is one interface (XI is not used) that is already in place.
    CRM sender system
    DM and ERP Receiver systems.
    CRM RFC call DM RFC directly and same CRM RFC call ERP RFC directly.
    Result (can be error or correct)is returned back to CRM RFC from DM and ERP RFC's.
    Now I want to make this scenario in XI.
    If I make without BPM I get message 'Multiple receivers are not allowed for Sync systems in Receiver Determination.
    Pls advice how to make this scenario with Error an Exception Handling.
    Regard

    Rick,
    this makes no sense - there must be some differentiation. It woudn't be necessary only if there was one function, which first calls DM and then calls ERP and both calls would be done INSIDE this one function.
    I meant, that you have only one function, which calls both systems - I mean - the same interface would call the system... Do you know what I mean?
    Whatever..
    I have a better solution for you. Do you know what ABAP proxies are? Let's do it this way and it will be the easiest and most reliable way.
    Create 2 interfacec - one will call DM and one ERP. Develop 2 separate scenarios. No conditions - Just 2 simple scenarios. On the CRM system go to t-code sproxy. (eeee, hope you have an SAP CRM and have configured settings to be able to develop proxy objects.)
    Generate proxies and replace current functions by calling the proxy objects' methods.
    This is of course possible only if u have
    a, CRM from SAP
    b, configured settings XI<->CRM (usually does basis team)
    Ok, again one thing: CHECK how your current scenario work - how are the calls made.. I believe, there are 2 different calls in one function, so when the function in CRM is ran, first call is made and then the second. But forget this general function, because it is not the interface. The interfaces are the functions which really try to send and receive data. And they simply CAN'T be the same, otherwise it wouldn't be possible for CRM to know, to which system should be the call made to!!! So, ask you colleagues for THESE TWO calls. If they tell you, no, there is only one call, which is general (which is bullshit, because it simply can't - again, there must be at least some flag or what), then just tell them - ok, this is not possible. I need a flag to be able to differentiate the messages (and this will be the condition in receiver determination) or simply let them to develop for you 2 independent function. ! for call to DM and 1 to call to ERP. You will then create 2 separate scenarios and they will use these 2 functions in their one general or whatever...
    ufffff
    Peter

  • One Sender system (sync) and two receivers system(Sync) . Pls help

    Hello All,
    For one Sender system (sync) and two receivers system(Sync)
    as I am using BPM for it.
    CRM sender system (RFC)
    DM (RFC) and ERP Receiver systems (RFC)
    Pls let me know
    In Receive there is only two mode
    1. Async
    2. Open S/A bridge
    So do i need to choose Async mode for sender RFC.
    Pls tell me the BPM flow steps for my scenario
    Regards

    Use Open S/A bridge
    The scenario could be done wihtout bpm. Ur requirement is not clear but here could be the steps. Steps.
    Receive
    Sync send
    Sync send
    Async send
    Regards,
    Prateek

  • I have one blackberry id and two blackberry's but can only receive e-mails on one device!

    Hi all,
    I have a problem! I have one blackberry id and two blackberry. I have given my old blackberry to my wife.
    I have just setup my new phone but whilst setting up my e-mails on my new phone we have noticed that the e-mails have been transferred to my new phone but have stopped working on my old phone.
    The odd thing is my wife had a previous blackberry and we were able to both get the company e-mails on each phone.
    The message that appears when e-mails have been transferred to the new phone is there is another device registered to this blackberry id and only one device can receive e-mail.
    How can I unregistered my old phone from the blackberry id and re-register it under my wife's details and hopefully receive the e-mails on both phones?
    Please help as its vital for the business.
    Cheers Nick

    Hi woodbe and welcome to the BlackBerry Support Community Forums!
    The BlackBerry ID is only designed to work on one device at a time. Your wife can sign up for a new BlackBerry ID by going to www.blackberry.com/blackberryid.  Also, to receive email on her device, she will have to have a BlackBerry data plan configured with your wireless network provider as well.
    To change the BlackBerry ID on her device, you can back it up using the BlackBerry Desktop Software, then perform a security wipe from Options>Security.  Upon the reboot, sign in with the new BlackBerry ID, then you can restore the data using the BlackBerry Desktop Software again.
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Just updated my iPhone 4 from IOS 6.1.3 to 7.1.2, I know I am behind the times, but I got there eventually! All seems well but I have one specific problem and hope someone can offer a helpful suggestion.

    Just updated my iPhone 4 from IOS 6.1.3 to 7.1.2, I know I am behind the times, but I got there eventually! All seems well but I have one specific problem and hope someone can offer a helpful suggestion.
    On opening the app "Find my iPhone" I add my password and sign in, to be greeted with a screen that says;
    "Update Find My iPhone. A new version of Find My iPhone is available from the App. Store. You must install the update to continue using the app. Update now"
    On hitting the "Update now" button I'm taken to the relevant page on the App Store, to be told that I cannot update as it needs IOS8 to be able to continue and as my iPhone is only a 4 cannot install IOS8.
    I'm left going around in circles. The only thing would be to delete the app, but looks like I could not re-install the version I would need. Any body have any thoughts or suggestions? (Apart from updating my phone, I have a few months left on the contract!)
    Thanks in advance.

    Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
    Anything else I could try, or am I doomed!
    All of your help is much appreciated, thanks

  • HT3702 Is it possible to have one credit card and two debit cards on my itunes account so that we can use different cards for different purchases?

    Is it possible to have a number of cards (say one credit card and two debit cards) to be listed as the payment cards for my itunes account, so that different cards can be used for different purchases?  Or can you only have one card registered on itunes at any one time?

    So is there any way that three members of a family can share one itunes account but pay for their own purchases, other than inputting their own cards each time they make a purchase.
    No, there is no way to do that.
    Or if we all have our own individual itune accounts, can we share each other's music, or can you only sync your iphone/ipad/mac, with one itune account at a time?
    You can sync content from up to five iTunes Store accounts to any given computer or device. You just will each have to copy the content into your own libraries so you can sync to your devices and have your devices authorized to all applicable accounts.
    Regards.

  • Two Sender System and two Recievers Systems

    Hi .
    1) In my scenario I have 2 sender JMS  systems and one JDBC receiver and one File receiver system in a single scenario.
    2) Based on a key field SEND_FLAG in the JMS message of the sender,data will be forwarded to  either JDBC or File .
    Hear i can use BPM by using 2 receiver steps i can collect messages and send to either JDBC or File .
    Client is very Specific in Neglecting BPM,
    Can any one tell me is their any other method in which a single   sender communication channel will be designed to fetch data from the two JMS servers.
    thanks in advance
    shakif

    Hi,
    Without BPM you can not receive 2 messages to a same interface.
    Hence use the BPM and proceed further. The interface detemination condition works based on Sender Message Interface. As here there are 2 sender interfaces..so you use BPM here..
    Rgds
    Moorthy

  • Can I have one apple ID and two iCloud accounts for different devices.

    can I have one apple I'd and numerous iCloud accounts for different devices?

    Yes you can, you just need to go into settings and into icloud, once it says account, login to your desired account

  • Can we have one sender and mutliple receivers in XI processing

    Hello,
    I will explain a scenario where you will have one sender channel and mutliple receiver channels.
    There is a sender channel along with Sender Agreement where u mention the interface name and namespace.
    There are two receiver channels along with two Receiver Agreements one for each with different interface names and namespaces also.
    Now the processing is like this,
    Sender sends some data and depending upon the agreements the corresponding receiver receives the data.
    Will the process is correct or is there any other way to run the scenario?
    Thanks,
    Prakash

    Hi Prakash chitti,
        Of course the scenario that you were telling is possible.. Take the case of file-to-multiple file scenario, where single file sends the source xml and multiple receivers gets the file.. For that you need to have
    1: one sender channel
    2: two receiver channel
    3: one sender agreement
    4: two receiver agreement
    5: One interface determiniation
    6: One receiver determination
    at the receiver determination, goto the tab 'Configured Receivers', and specify the number of recievers; and ensure they are present at the 'Configuraton overview for Receiver Determination'..
    You can even set conditions for receiver determination from the source point..
    This will help you.
    Thanks
       Vinod V
    Help me with points

  • One business system and two FTP server locations

    Hi,
    We have one business system and two FTP server locations related to it. We have to send two different messages to this business system.
    It has to be send to both the ftp server locations.
    How do we configure the receiver determination and receiver agreements ?
    Do we need two receiver Business systems for this?
    How do we configure the receiver agreements especially?
    Urgent
    Regards,
    John

    hi
    1) you must create 2 CC, each one to one FTP server.
    2) how you send diferent message to each FTP yo only have to define 2 Reveiver determination, and two Interface Determination.
    3)one sender Agreement
    4)2 receiver agreement.
    take in mind you only have 1 BS you must create 2 receiver determination, else if have 2 one receiver would be enouhgt
    Thanks
    Rodrigo

  • Can we connect one R/3 to two BW systems and extract data?

    Can we connect one R/3 to two BW systems and extract data succesfully ? kindly through light on this issue.
    Thanks and regards.
    Ankush Shejul

    Of course you can.
    Just have to have the RFC destinations in place and use the
    CALL FUNCTION '....' DESTINATION '....'
    commands in ABAP, check out the ABAP forums for more info.

  • I have one home computer and our household has 2 iphones. I am signed up on itunes and now my husband would like to have an account with itunes as well. Can there be two accounts for 2 users for itunes on one home computer? How do I add another account ?

    I have one home computer and our household has 2 iphones. I am signed up on itunes and now my husband would like to have an account with itunes as well. Can there be two accounts for 2 users for itunes on one home computer? How do I add another account ?

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • I have one iPhone GS and one iPad 2, how do I syncronise my contacts and my calendar between the two devices?

    I  have one iPhone GS and one iPad 2, how do I syncronise my contacts and my calendar between the two devices?

    Install iOS 5 onto both and you can use iCloud to sync contacts and calendars between the 2 devices.

  • We use one windows machine and two mbp's (post 2012) at home. We have a modem *** router from a  non apple vendor that airport utility finds and connects with absolute ease. But doesn't stay connected. The signal drops often, what can I do?

    We use one windows machine and two mbp's (post 2012) at home. We have a modem *** router from a  non apple vendor that airport utility finds and connects with absolute ease. But doesn't stay connected. The signal drops often, what can I do?

    No, not all network clients -- only the two mac portables and they run together very rarely. The windows machine is hardwired to the modem router combo, and that's always sailing smooth. The mbp that is most used is perhaps 20 feet max from the router - and in another room. But it also happens when I take in into the same room as the router. On occassion, I have noticed while using network diagnostics, that one digit in the IP number sometimes appears to go awry. I then try to set up manually - and it works for a bit but is hugely erratic.
    I rigged a hand me down airport express and set up a separate network for the two macs and it ran beautifully for some weeks, but that little piece is now dead and none of the retailers in my suburb seem to have one in stock. I don't want to be forced to buy an airport extreme and here in India, there's no trustworthy online ordering option.
    The man from the ISP's been here several times and I don;t think it is a modem/dsl issue because the smartphone connects and the macbook drops when both are the same distance from the router? I am truly foxed and intensely irritated! :-(

Maybe you are looking for